Bluetooth headset HS 36W

Is there anyway that this headset can be set up to be used on my computer as a bluetooth headset? I have bluetooth on my computer and can use it with my phone and other additions.
Thanks.

Steep 2
Today the kit HS-36W (Nokia product) do not work no sound in no sound out. But it can take a line.
Thanks Nokia for this product.
I think the E50 Nokia product is a big ch...
This product have a good look but it do not work corectly.
the contact list have a problem whenyou choise a letter your have a list by name and first name very good when you have a big list. The camera system take a picture when a probleme too you can take a picture at h 00:00 you have a picture at h 00:01 you can't take a good picture if the sujet is not fixed. And other probleme the font is little you can't see a texte coorectly but you have a big screen with a little font ridiculous.
On the documentation you can see : Nokia for Business.
And i say : Business for Nokia.
Do not buy this product.

Similar Messages

  • N82 WLAN and Bluetooth Headset

    Hi Guys,
    I have two problems:
    1. I have a Nokia Bluetooth headset HS-36W and my Nokia N82 does not seem to detect it. However, my Nokia 7610 was able to detect it and I was able to use the headset. Is HS-36W not compatible with Nokia N82?
    2. I tried using WLAN but was a failure. The connection was open so NO user ID or passwords were required. Error was WEB: NO GATEWAY REPLY. Others using a laptop was able to access the network. Is there any problem or is there something required from me to do?
    Appreciate your advice.
    Many thanks!
    SW: 20.0.062

    Check your positioning settings first: what is your access point there, and what is your positioning server address? The access point should be a GPRS access point, defined by your service provider. Write down your default positioning server address and replace it with supl.nokia.com that usually works well. If it won't, you can always return back to your default server. Usually the server is automatically correct on N82.
    You can't use WLAN connection for the Assisted GPS and most likely also WAP is out of the question. You'll need to use a GPRS connection in order to get the current satellite status without waiting outside for several minutes. If you don't have a GPRS data subscription, you're out of luck. Contact your service provider for this.

  • IBook G4 + Bluetooth headsets... is it possible?

    Hi there.
    Has anybody with an iBook G4 successfully paired it with a bluetooth headset? I've been scouring the forums for a couple of days, and read about people with PowerBooks and MBPs successfully using bluetooth headsets, but I haven't actually seen an iBook user say that they have been able to do the same.
    I have an iBook G4 purchased in December 2004, and a D-Link DBT-120 Bluetooth adapter (i.e. the one recommended by Apple).
    I would greatly appreciate any anecdotal confirmation that iBook users are able to use bluetooth headsets with their iBooks (either via internal Bluetooth or via a USB Bluetooth adapter).
    Many thanks!

    I'm using a Nokia HS-36W and no problems... Just a bit of delay in sound.
    Using with Skype and work fine.

  • How do I use a bluetooth headset with garageband?

    How do I use a bluetooth headset with garageband? I can't get it to work after many tries.

    I can pair the headphones with the computer but the sound from GB is distorted and muffled. I can barely hear it. The set works with iTunes, but not with GarageBand.

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • I am unable to use my bluetooth headset to record voice memos, is there a trick to this?

    I have a Plantronics Voyager Pro+ Bluetooth headset, I am unable to use it to record voice memos on my Iphone 4, using IOS 6.1.3.  The memos record fine when using the built-in mike but not the Bluetooth headset.  Does anyone have any insight or comments that might help resolve this situation?
    Thank you.

    Hello jaymecaroline,
    Thanks for using Apple Support Communities.
    The steps below will help you in resolving this issue of your iPhone giving you a No SIM alert.
    Update your iPhone to the latest version of iOS.
    Toggle Airplane mode On and Off.
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    If you still are unable to resolve this issue, contact Apple support for further assistance.
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/TS4148
    Take care,
    Alex H.

  • Play mp3 on bluetooth headset

    Just wanted to share this.
    Yesterday I bought a Jabra EasyGo bluetooth headset. Unfortunately, it could not bluetooth mp3 songs from my iPhone 4 iOS5. It can only be used for making/answering calls. However, today I found out that the headset can also play Voice Memos. This gave me an idea on how to bluetooth the mp3 songs from the iPhone to the headset:
    Step 1 - Convert the mp3 file from Stereo to Mono (I used Audacity to accomplish this).
    Step 2 - Add the Mono mp3 file to the iTunes library in the PC (my iTunes version is 10.5.0.142).
    Step 3 - Sync the iPhone with iTunes.
    Step 4 - In iPhone, open the Voice Memos. The imported mp3 file will appear in the list.
    Step 5 - Turn the headset on (already paired with iPhone), then a 'speaker & bluetooth' icon will appear on top-left corner of the iPhone (see photos below).
    Step 6 - In the Voice Memos, click on the play button next to the name of the the mp3 file.
    Cheerio!

    m8, 
    BH-106 headset compatible with phones and devices supporting Bluetooth specification versions 2.1, 2.0, 1.2 or 1.1, Handsfree Profile (HFP) 1.5 or 1.0 and/or Headset Profile (HSP) 1.1.
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Ios 6.1.4 Phone calls not working from Jabra EasyGo bluetooth headset

    I updated to 6.1.4 yesterday
    I use Jabra EasyGo bluetooth headset.
    Music streaming is fine with the headset.
    Problem is it doesnt respond to any phone call or dial  commands.
    Tried it on another friends iPhone 5 with iOS 6.1.3 it works
    Please help to solve as I depend on the bluetooth my work drives car a lot.
    Tq

    I don't think I can restore the back up from iCloud, because I did not back it up to iCloud before the update to OS 6.1.4.  I don't think this is related to voice samples because it seems to cut in and out, like Siri is not 'hearing' me, due to a problem with the microphone.
    Apple please help!

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • How do I pair my Bluetooth Headset with ThinkPad with Windows 7

    I have got a Plantronics explorer 210 bluetooth headset.  I was hoping to pair it with my lenovo E431 laptop running  Windows 7 .  However, I do not see any application that will allow me to pair the headset.  I do see an application to transfer files over bluetooth. I don't see bluetooth device in the system. Thought the specs say bluetooth should be present. 

    Look into tray menu or press the wireless-FN-button and see if has been deactivated...
    @LENOVO: WE WANT BIOS TO COMPLY WITH ACPI STANDARDS!

  • How do I pair my bluetooth headset with my mac?

    Hi, I have trouble pairing my Plantronics M25 bluetooth headset with my Mac and my iMac.
    The bluetooth headset pairs with my phone ok (iPhone), but my computers just dont find it.
    I have bought additional USB bluetooth stick, but getting the same resutls.
    I wonder how can I pair it with my macs?

    Ask the headset manufacturer.
    Barry

  • How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    Ask the headset manufacturer.
    Barry

  • I use a bluetooth headset with iPhone 5 but when I ask Siri to read my email she says I must unlock my phone first.  If I take the phone out of my pocket I might as well just read the email then.  Is there a way to fix this?

    I use a bluetooth headset with iPhone 5 but when I ask Siri to read my email she says I must unlock my phone first.  If I take the phone out of my pocket I might as well just read the email from the phone screen.  Is there a way to fix this so the phone doesn't have to be unlocked?

    Apple, as I'm sure you know, now manage official phone 'unlocks' directly rather than the Newtork doing so.
    When a GSM Network Provider buys a consignment of iPhone's they are locked to that carrier and may only be officially unlocked if said carrier requests it. If so, it is Apple who do this, via iTunes.
    I am therefore inclined to think that part of the any generic iTunes syncing process involves the transmission of key hardware data, including IMEI, to Apple whenever the handset is synced.
    If this is the case and, as each iTunes account is linked to a credit card, were Apple to maintain a database of genuinely stolen phones (ones reported to Police) they could advise said Police force when a stolen phone stuck its metaphorical head over the parapets once again? They would be able to identify the name & address of the new user.
    I have spoken to the Police here in Ireland today and they regularly engage with Apple on such matters.
    This may not be tracking as we know it Jim, (not using GSM Triangulation or GPS) but it's arguably even more targetted and leaves an indelible fingerprint of guilt on the thief.
    The laws here are simple in this regard, if you are in possession of stolen property, knowlingly or otherwise, you forfeit the goods once the Police show up. Whether you get prosecuted depends on whether you stole the goods or were duped into purchasing them.

  • Bluetooth Headset will not work following upgrade of PC desktop software

    Recently I updated my laptop with the latest desktop software in order to allow synchronization between Microsoft Office 2010 and my blackberry tour.
    The sync works!
    But now that I have upgraded, I am having a problem with my bluetooth headset.
    After syncing my phone to my PC over bluetooth, my bluetooth headset connects to the phone ok but when you try to use it no sound comes through either the headset ear piece or the phone.
    So if you try and dial a number, the phone rings where you are calling but you cannot hear the ringing or the person on the other end once they have answered it.
    To correct the problem you have to remove the battery from the phone.   Then once you replace the battery and wait 5 - 7 minutes for the phone to re-initialize the headset works just fine.   Until the next time you sync the phone with the laptop of course.   Then the headset stops working again.
    I have tried deleting all the bluetooth devices from the phone and re-connecting them.  Does not help.
    Anyone else seeing this problem?
    This is my 2nd blackberry.   My 1st was a Perl on T-Mobile. Never had a problem.   But this tour from verizon has be a problem from the start.    Think my next phone is likely to be anything but blackberry!

    Hello ralpha,
    I would suggest you back up your BlackBerry data and clear the Bluetooth Options database. Re-Pair your headset and try making calls again.
    KB10167 will show you how to clear individual databases.
    Let me know how you make out.
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My ipad mini does not find my Nokia bh-111 Bluetooth headset, yet all other devices do and pair without issue

    I use my bh-111 with my windows phone, my laptop and my wife's android jellybean phone without issue but the ipad mini will not find it, any ideas?

    Hello Jamessm,
    I would try the troubleshooting steps in the following article about Bluetooth and iOS devices.
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/ht1664
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • How do I get my contacts back after my phone wiped itself?

    I have a password set on my phone and you get 10 attempts before it locks you out.  My friend decided to take all 10 of those attempts and failed and right after that a white screen came up and said "wiping". I took my battery out and put it back in

  • Bridge CS3 Not Showing JPG/PSD Files

    Running version 2.1.1.9 on a Mac G5 Dual 2.5 w/4.5 GB of Ram under OS 10.5.2. BRidge for some reason today first stopped showing entire folders of JPGs files. Refreshing folders and restarting Bridge did not fix the problem. Rebooted the machine and

  • Connect to Azure Sql DB through WCF Data Service

    I am following the tutorial: http://msdn.microsoft.com/en-us/library/windowsazure/ee621789.aspx; Connect to Windows Azure SQL Database Through WCF Data service on a Windows 8 machine running VS2013.  Until starting this tutorial, I have only been usi

  • [SOLVED] Ruby 1.9.2

    I can't get the new Ruby to work. It's ruby 1.9.2 from Extra. Here is what I get when I run gem: [root@xhkr ruby]# gem /usr/lib/ruby/site_ruby/1.9.1/rubygems/source_index.rb:68:in `installed_spec_directories': undefined method `path' for Gem:Module (

  • Flat XML in the WSDL

    hello I am recieving in RFC2WS a WSDL. in the respone the WSDL look like this: <s:element name="GetZagmshDataResponse">   <s:complexType>     <s:sequence>         <s:element minOccurs="0" maxOccurs="1" name="GetZagmshDataResult">      <s:complexType