Bluetooth Headset Loyalty to iPhone?

I paired my apple bluetooth headset with my iphone through the dual-charge dock, and I read somewhere on this forum that there is this loyalty between those two. Now as I was trying to pair the headset with my MBP, the bluetooth radar couldn't detect the thing, although I'm pretty sure it's turned on, and my iphone is no where near the headset (had to send it back to replace the battery, two days out of warranty and battery cracks, thanks apple!)
Anyone know a way to break the loyalty bond?

To pair the headset with a Bluetooth enabled Mac using Mac OS X version 10.4.9 or later:
1. Open System Preferences and click Bluetooth.
2. If this is the first Bluetooth device you’ve set up, click the Set Up New Device button. Otherwise, click the Add button below the list of your existing devices.
3. Choose Headset.
4. Set the headset to be discoverable.
5. Follow the onscreen instructions. When prompted for a passkey, enter 0000.
To set the headset to be discoverable, so the other device can sense it:
1. Turn the headset off.
2. Press and hold the headset button for about eight seconds, until you hear the startup tones and then five quick high beeps. The headset remains discoverable for about five minutes. The status light blinks green for as long as the headset
is discoverable.

Similar Messages

  • Can I share a bluetooth headset with my iPhone 4 and my Mac?

    Can I share a bluetooth headset with my iPhone 4 and my Mac? I don't mean both at the same time. I just think it's silly to buy a separate headset for each. I'd like to be able to sometimes use the headset with my Mac and other times use it with my iPhone. Is this possible? How hard is it to set up and is it annoying to switch over from one to the other.
    The headset would be used 75% of the time with my iPhone.

    Contacts can be synced direct with Outlook 2003, 2007, or 2010 via the iTunes sync process along with syncing calendar events, notes, and reminders. This is selected under the Info tab for your iPhone sync preferences with iTunes.
    If you don't use Outlook for contacts - your Outlook address book is empty, before the first sync for this data enter one contact in the Outlook address book. This will provide a merge prompt with the first sync for this data.
    Or if your iPhone 4 is running iOS 6, you can create your hotmail account using the hotmail account preset with the iPhone's Mail app per the instructions included with this link. If your iPhone 4 is not running iOS 6, you will need to manually create the account as an Exchange account.
    http://www.wikihow.com/Sync-a-Hotmail-Account-on-an-iPhone
    Regardless if you have any contacts available in your hotmail online address book, you should be provided a merge prompt when turning contacts on for over the air syncing with your hotmail account settings on the iPhone, which you want to select. This will merge your existing iPhone contacts with your hotmail online address book and merge your hotmail online address book with your iPhone contacts.
    To have the contacts available on the iPhone 5, create your hotmal account with the Mail.app on the iPhone 5 followed by turning contacts on for over the air syncing with the account settings on the iPhone.
    Or after syncing your iPhone 4 contacts direct with your Outlook address book, sync your Outlook contacts with the iPhone 5.

  • I have Sunglasses Bluetooth Headset and Apple Iphone 4, I Can Communicate Calls Using Headset. But I can't Listen Musics Using Headset.

    I have Sunglasses Bluetooth Headset and Apple Iphone 4, I Can Communicate Calls Using Headset. But I can't Listen Musics Using Headset.

    The iPhone supports the following Bluetooth profiles. http://support.apple.com/kb/HT3647
    In order to play music through the headset, it must support this particular profile, A2DP.  You can check the specs on the headset to see if it does support that. Not all headsets that support phone calls will support music.

  • Can anybody actually RECOMMEND a bluetooth headset for the iPhone?

    I see a lot of bad experiences, & not too many good ones.
    Can anybody actually RECOMMEND a bluetooth headset for the iPhone? I just need one that works, with very little features (ie: redial button on headset).

    I've actually posted another thread, and I don't mean to take over the original members post, but I'm hoping this will help others who may be having the same problems. Thanks to all of you who have posted your results with the various headsets!
    I am now on my third iPhone 3G in under six months. The first one would drop calls when the corded Apple headset was plugged in during the call, and the second would cause the caller on the other end to hear an echo when I used the Apple headset. Plus, it did not respond well at all to Bluetooth headsets. Tons of static, call echoes, and noise cancellation not working.
    My experience with the Jawbone 2 has been disappointing. I have heard way too many testimonials of satisfied iPhone users who love the JB2, so I'm beginning to think it's just me. I went through FOUR Jawbone 2 devices in under a month, all because of poor sound quality, and the Noise Assassin not working properly.
    The white rubber tip sat very well against my cheek, and the default medium earpiece fit perfectly in my ear and was very comfortable to wear. Everything seemed to be in order, but the same problems would arise over and over again. I would get poor sound quality on both ends of the call, and people could hear the tv or the radio playing in the background on my end.
    Maybe the structure of my head isn't suited for the JB2, but I have a very normally proportioned head. I refuse to believe it's the device——It has been rated highly by too many people to be the issue. I've all but given up on it, regrettably.
    The Plantronics Discovery 665 I tested had issues with static. I would hear it on my end, even thought the phone was no more than two feet away.
    I'll give the Plantronics 925 a try, as well as the Blue Ant V1. We'll see...

  • Can i use a motorola bluetooth headset with an iphone 5?

    can I use a Motorola bluetooth headset with an iphone 5?

    My Nokia Bluetooth headset works great both for calls and Music because it's a2dp

  • Can't pair up my Samsung WEP410 bluetooth headset with my iphone

    I am able to pair up my samsung bluetooth headset with my other phone. Once I try to connect it with my iphone, my iphone just showing searching forever.
    is there anybody know what's going on???
    THanks

    I have the same headset and paired it successfully using these steps:
    1) Put iPhone in bluetooth discovery mode (Settings > General > Bluetooth > On). While on this page your iphone will have bluetooth visibility on and will search for devices.
    2) Put your samsung headset in discovery mode by holding down the large button for 10 seconds. You should see a constant blue light (not flashing).
    3) Your iPhone should detect the headset and ask for a pin code, enter 0000.
    4) Your headset should now show as being paired with the iPhone.

  • Procedure to pair a bluetooth headset to the iphone??

    This is the first time that I have ever used the bluetooth on my iPhone. I just received a Motorola H550 bluetooth headset. This lists the iPhone as compatible. Is there some special procedure to follow to get it to pair? I turned on the headset and let it come on completely, then went to setting and turned on the bluetooth on the iPhone. It recognized the H550 Device, but the spinning gear continued and showed "Not Paired". It also says "Now Discoverable" Did I miss something? It has been updated to 1.1.4.
    Thanks
    Message was edited by: Herschel Hochman

    Hey Herschel,
    It sounds like you'll need to put the Motorola headset into a discoverable mode. Generally this is done by holding down a button or pressing multiple buttons until you see it blink. You'll have to check the manual that came with the headset to find the exact way to make the headset discoverable.
    This article walks you through pairing the iPhone with a third party headset.
    http://support.apple.com/kb/HT1664
    Jason

  • Using Multiple Bluetooth Headsets With the iPhone

    I have a jawbone 2 & blueant v1 bluetooth headsets both paired & working with my 3G iPhone but i dont know how to switch between them. anyone know about this?

    I have to reply here. I just came over after a horrible three weeks on a new BlackBerry Bold. I've been a BB user for several years and, being a Mac user, have LOVED the way my wife's iPhone worked, especially connection and updating from her iBook.
    So, when I finally gave up on the BB and got the 3G I expected some things to be the same. One of them being the way the BlackBerry would virtually 'float' between Bluetooth devices, almost seamlessly. It took a while to get it working, but finally got it.
    I have a Jabra BT500 earpiece, BlueAnt ST3 speakerphone in my car, and a Motorola Bluetooth device that adds my iPhone to the cordless phone network in my home.
    The trick is to PAIR EACH DEVICE as if it were the ONLY DEVICE CONNECTED. DO NOT UNPAIR the first device and move on to device #2. Enter the code, let it PAIR and move on to device #3 doing the same. Once you've done all of your devices, you simply move 'into the zone' of each one and they should connect.
    The Jabra, obviously, had to be turned on, but paired immediately. The BlueAnt ST3 turns on when it senses movement in the car, i.e. opening the door, etc. Once it's on, it pairs immediately. When I get home and are out of my car, I place the iPhone near the Motorola device and my cell number is now part of my home cordless system.
    If I look at the Bluetooth setup in the general prefs, it shows all three devices as being paired. PAY NO ATTENTION TO THAT MAN BEHIND THE CURTAIN!!! IT ALL WORKS!!!

  • Can I listen to WAZE app commands on a bluetooth headset on my iPhone 5?

    Just got an iPhone 5.  Able to easily link its Bluetooth to my 2011 Audi TT for hands free driving.  However, the TT entertainment system Bluetooth audio is limited to phone calls only (confirmed this with my Audi service advisor but maybe someone knows a work-around?).  My biggest issue is that I want to hear navigation commands and traffic advisories from my WAZE app while I listen to music from my car radio but the iPhone speaker is no loud enough to hear clearly.  (My wife's 2012 Mercedes E350 allows me to do this via its Bluetooth connection.) Will I be able to hear the WAZE information if I use a Bluetooth ear piece or head set?  Are there specific capabilities the headset needs to have for this to work?  (Read somewhere that mono earpieces will not support this.)  Will I have to disconnect my car's Bluetooth to get it to work while driving?

    Thanks for the answer.  I did a little more investigating and found the following information.  The reason why some iPhone 5 Bluetooth connections (to a car or earsets) only provide phone service is that the device you are connecting to only supports a lower Bluetooth protocol with mono sound.  The iPhone 5 Bluetooth connection for phone uses the mono protocol.  Many apps, like WAZE use a newer bluetooth protocol that uses stereo sound which the iPhone also supports.  So theoretically, any newer earset should work with apps but I have seen posts of some models that do not.  Perhaps this is operator error.  I bought the Jawbone Icon too and it definitely works.
    If you buy a Jawbone, beware of certain vendors.  Many on Amazon and eBay are selling "factory refurbished" or other sources that are getting a lot of complaints about reliability and Jawbone does not recognize the warranty unless it is sold by an authorized retailer (usually at the full list price of $130).  Get one that is being sold in the original factory packaging.  They start at around $50 from non-authorized vendors on Amazon and eBay.

  • Which Bluetooth Headset should I buy for my Iphone 4s ios6.

    I want to buy Bluetooth Headsets for my Iphone 4s with ios 6.
    I am confuse for I should go?
    Please guide me?
    I selected 2 Sony MW600/Plantronics Black Beat GO

    I have the lifeproof waterproof case and got JayBird Freedom 3 bluetooth headphones to go with it.  They last 8 hours, they're sweatproof, they come with more than 10 fittings, they get loud and sound great, the working distance is much better than they claim - I've been able to get 20 feet away for long periods of time with no problem but i've noticed if you put something aluminum between you and your phone it will cut out for a second.
    http://www.jaybirdgear.com/freedom-bluetooth-headphones/

  • What is the best headset for the iphone 5 that is not bluetooth.  I need great listening and speaking quality.

    What would you consider to be the "best" non-bluetooth headset for the Iphone 5?  I have had some serious health issues of which could be stemming from the bluetooth and I need great sound quality both listening and speaking.  Any suggestions?

    Problem with wired headsets is that there is not std for mic in headsets so if its not 100 % made for iphones it will not work

  • IPhone + Bluetooth Headset H710 = ????

    Will my Motorola Bluetooth Headset H710 work with my iPhone? I just bought it online and I didn't even think if it would be compatible with my iPhone and I don't want to open the box if it's not going to work. I tried connecting a different Motorola Bluetooth headset to my iPhone and nothing came up when it was trying to pair it. HELP!!!

    According to Motorola's website, apparently the H710 does support the iPhone.
    Take a look [here|http://www.motorola.com/consumer/v/index.jsp?ps=y&itemID=5041586a336a0110 VgnVCM1000008206b00a___&sectionName=SEC_TYP_00012&vgnextoid=38b5f7c0c1a0b010VgnVCM1000008206b00aRCRD &show=globalSupport&catID=7af81300ec3b0110VgnVCM1000008206b00a____&pg=PG_TYP00003&productID=69e5a8a6663c6110VgnVCM1000008206b00aRCRD].
    You should be able to use that web page to select the Apple iPhone and it'll show you how to use the two together.

  • What is the best stereo bluetooth headset for iphone 3gs? or 3.0 version??

    i would like to know the best compatible stereo bluetooth headset for my iphone 3gs.. since apple didn't release one.. any 3rd party headset MODEL will do.. hoping for your response..
    ps.. nokia, sony ericsson, motorola, samsung devices are included with the "3rd party devices" thanks!!! =D

    There isn't any - iPhone simply don't work proberly with a bluetooth headset.

  • Voice recording using Bluetooth headset mic?

    Does anybody know if / how it Is possible to record voice memos using the mic on a Bluetooth headset with the iPhone? (specifically iPhone 4 running ios 4.0.1)?
    Any help appreciated. Thanks in advance.
    Josh

    I'm just bumping this as I have not seen any additional information on this topic... does anybody have an answer?

  • BlueAnt Z9 headset - awesome with iPhone!

    I picked up an Apple Bluetooth Headset for the iPhone and found it to be absolutely terrible, a waste of $129. It was staticy, it had poor range, it had weird background noise...I was completely unsatisfied with it other than the tiny size. I've had several other Bluetooth headsets before but I was still on the lookout for a better one. The Jawbone was excellent, but had some minor issues that I didn't care for (issues with the noise cancellation feature, fit issues, etc.). Then I read this review on the BlueAnt Z9 headset over at MyiTablet:
    http://www.myitablet.com/my-itablet-review-blueant-z9-bluetooth-headset-151384.p hp
    I decided to pick one up. MyiTablet sells them for $99, a full $30 less than the iPhone headset. It's not quite as sleek or simple as the iPhone's headset, but it's still quite small. I found I actually really liked the size because the buttons are really easily accessible, moreso than on any other headset I've used in the past. The volume adjustment works fine with the iPhone and it paired very easily. One feature I really like is that you can pair up to 3 devices to the Z9 headset, then press the multi-function button to switch over to them. That way if you wanted to swap the headset from using it with your iPhone to using it with, say, your Mac laptop over Bluetooth to chat on Skype or iChat, you don't have to do the whole pairing dance every time. It has a lot of other nice little features, just read the review linked above for more info on those. Oh, it also has great range - I could walk all over my room without any static at all.
    Overall I really like it. If you need a new Bluetooth headset or are frustrated with the one you have, you'll probably really enjoy the Z9 headset. It's loads better than the iPhone headset in terms of quality, you can adjust the volume easily, you can swap between Bluetooth sources quickly, and it has great range.

    Michael Mehlhorn wrote:
    Windows is required to update the firmware in the Headset. I tried unsuccessfully performing the firmware update with Windows XP Pro on my MBP running Parrallels VM. The unit firmware updated without a hitch using an old Wndows machine that I had laying around collecting dust. I did not try the update with Bootcamp, as I do not have my MBP configured to run Windows that way.
    I was orginally going to purchase the Apple Headset with my iPhone "iShill" store credit, but have read many reports that the unit was overpriced and had poor performance.
    What you wrote solved a question I had. I'm also deciding between the Jawbone and Blueant Z9 but the fact that I have to use a proper Windows machine to do firmware upgrades is a no-go for me unless I can do it via Parallels which according to you experience is negative. I don't have access to a Windows Mac, that is unless I decide to make my MacBook Pro a boot-camp-able machine which would be silly because the only reason to do that would be for the Blueant firmware upgrade.
    Alas!

Maybe you are looking for

  • How to kill open PDF's when installing?

    I have several hundred computers that currently have reader 9.1 installed.  I built a custom install of 9.2 using the Customization Wizard which uninstalls 9.1 and installs 9.2.  This will get pushed out via SMS. In versions 8.X and prior anytime a P

  • How to find the elements in the UI panel.

    Hello,          I have a UI panel from a plugin. I just need to automate it, like setting the text in the text box and clicking a button in the panel. For eg application.activeDcoument.swatches will bring in the swatches panel. Similarly i can able t

  • Regarding Dynamic Programming in HR-ABAP

    Hi,      I have problem on the dynamic programming. The Reqirement is like, Infotype 0008 if shows one Initial screen , into that infotype we have to add five fields this is an Enhancement and after we adding that fields into that infotype we should

  • ESS who is who

    Hi all we want show the results of search directly without user enters  the search criteria. The search criteria will be directly fill by the system. So the cuestion is if can we call via url directly the search result putting the search in url. Some

  • I had a ipod mini and now have a nano... trying  to upgrade itures to 7.x

    When upgrading to 7.x I get the following error pop up... Error 1905.Module C:\Program Files\iTunes\iTunesMiniPlayer.dll failed to unregister. HRESULT -2147220472. Contact your support personnel. Really not sure what I should and shouldn't do at this