Bluetooth HID (human interface device) on Droid Charge

You can use a bluetooth mouse and keyboard with the Charge.
But does anyone know if this is just a Samsung thing?
A froyo/gingerbread thing?

Please tell me that you have successfully used a bluetooth keyboard with the Samsung Charge, OR at this point it is still only a rumor.  I've been trying to pair a specifically designed android keyboard and it is not working.  The internet is FULL of frustration from people trying to do the same.  I have not found ONE person who has been successful.
The charge does recognize the existence of the keyboard, but when asked to pair, it gives a pop up that lasts all of one second, that instructs entering code, but that not only can't be entered in one second, it can't even be read in one second.  FAIL.
It is quite possible that the "exclusively Samsung" bluetooth profile does not ACTUALLY allow bluetooth keyboards>..
Anyone????

Similar Messages

  • Vista thinks bluetooth 'radio is "USB Human Interface Device"

    Hi all,
    I've been having this problem for a couple of weeks now; it came straight out of the blue - perhaps triggered by an update? I'm running Windows Vista Ultimate (still in trial period, actually, as I haven't bothered to buy it yet) on a 17'' MBP, and everything has been working fine as far as Mac hardware... or was... until my bluetooth radio suddenly stopped showing up.
    My Bluetooth devices still connect fine (well, only my wireless keyboard which doesn't need to be paired, my Mighty Mouse isn't working now), but do not show up in the Bluetooth Devices control panel applet. My radio shows up as a 'USB Human Interface Device' in the Device Manager, and no amount of uninstalling/reinstalling my BC drivcers is helping.
    This is becoming a problem for me; I do a lot of gaming and need my Mighty Mouse.
    All help is REALLY appreciated!
    Thanks,
    Bookworm

    It IS, but so are all USB Mice, Keyboards, etc,etc,etc. My issue is that because Windows Vista cannot specify it as being an Apple Bluetooth Radio, I cannot control it - and thus cannot use it to setup my mouse. The issue seems to be that the drivers for the Apple Bluetooth Radio are not being used when my adapter is detected - instead, Windows is defaulting to a generic USB driver which would work for most USB devices - but doesn't allow things that require specific device types to work, such as pairing with bluetooth.
    Happily, I have managed to obtain a fairly good USB mouse... the problem is that this ***** up a much-needed accessible USB port. I have to get a port extender or something...
    Message was edited by: Bookworm9405

  • Human Interface Device (HID) API

    Hi All
    I searched but, I can't find a Java Human Interface Device (HID) API for windows.
    Does such a thing exist?
    Thanks Very Much

    Cheers, there is also a more simple one here which works out of box but it's functionality is very limited.
    http://today.java.net/pub/a/today/2006/07/06/java-and-usb.html?page=2
    > And, as a last resort, that Java daemon (I believe
    the APC UPS installation program installs and starts
    one, anyway) can always be decompiled and inspected
    (although I would have qualms about the legality of
    it).
    I'm curious to know more about this.
    I've just looked in the powerChute instilation directory,
    I can't see anything java'y of java'ish. Can you elaborate on this a little more please.
    Thanks again for all the help. Still holding out for HID although your links are good and appreciated.

  • Human Interface device for 6280

    Any add-on software to activate human interface device for Nokia 6280? Blue tooth section is greyed, but some other cheaper brands than Nokia have this active! Any help!

    Cheers, there is also a more simple one here which works out of box but it's functionality is very limited.
    http://today.java.net/pub/a/today/2006/07/06/java-and-usb.html?page=2
    > And, as a last resort, that Java daemon (I believe
    the APC UPS installation program installs and starts
    one, anyway) can always be decompiled and inspected
    (although I would have qualms about the legality of
    it).
    I'm curious to know more about this.
    I've just looked in the powerChute instilation directory,
    I can't see anything java'y of java'ish. Can you elaborate on this a little more please.
    Thanks again for all the help. Still holding out for HID although your links are good and appreciated.

  • Human Interface Devices/To​shiba Hot Key Driver/Win​dows 8

    HELP! My computer is only 6 months old and my external mouse all of sudden stopped working, after many call and many research I have found that under my device manager, under Human Interface Devices, Hotkeys Driver has an exclamation point on it, the driver may be corrupt. I have requested the update the driver option but it is not updating. How can I fix the hotkey driver please? I need help. Toshiba tech support won't help unless I have them $170.00 I don't have that, I am a full time student? I am still in shock that Toshiba won't help me fix a problem on their software, I am so disappointed!!! Any help will be appreciated.
    Thank you!
    SZ

    Hi This is a program I use to find driver up dates. It's freeware. Not sure if the forum approves this program, so I better add use this at your own risk. Hasn't caused me any problems.http://download.cnet.com/SlimDrivers-Free/3000-185​13_4-75279940.html?tag=dre
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • USB Human Interface Device

    Hi, I have an annoying yellow ! in my Device Manager for the USB Human Interface Device. Can anyone point me to the correct driver to remove it please?
    Pete

    Hi Laurent, I got your email with files and replied with my findings. However my email to you was bounced back to me as undeliverable, so I will reply on here.
    I tried the files you sent; but unfortunately they had no effect using 64 bit Windows. I have since gone back to 32 bit; but not because of the problem with the human interface; I have decided to go back because my printer and my scanner manufacturers do not and will not be providing 64 bit drivers, and not only that; there are still other things that 64 bit are just not ready for.
    So having said that; reverting back to 32 bit has enabled your previous version to work perfectly as expected. I do still have my 64 bit setup on a spare hard drive, so I can go back to that anytime if you wish me to try something else; being that it will be inevitable to use 64 bit Windows in the not too distant future.
    Regards
    Pete

  • T61 USB Human Interface Device drivers not loading after undocking

    I have a T61 and after I undock (correct method, by pressing the eject button on the docking station and waiting for it to turn green) the laptop from my advanced docking station, the external mouse does not work.  More specifically, this is the error message that I can see in the USB Human Interface Device with the yellow ! in Device Manager.
    "Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38) "
    Is there a fix for this? If I reboot the laptop then I can get my external mouse to work because the drivers  can load, but I don't want to have to reboot after undocking.

    Regarding your keyboard problem, it seems to be a very low-level problem. The driver cannot access the Control Registers on the Keyboard. By going down from your error message to the lowest level, one can see that it's probably a simple "outb" operation (write data on a specified address, shouldn't fail if the address is correct...) that doesn't succeed.
    So I think you defintely need to look in your BIOS if you didn't deactivate something when upgrading, or messed with some address space, or many things I cannot think of right now.
    Good luck

  • USB Human Interface Device (HID) in LabVIEW

    How do you write/read to/from an HID USB device in LabVIEW? Note that this
    is not a mouse or keyboard but does use the standard Windows XP HID driver.

    Matt,
    Neither of the bellow worked. I believe this answer's why:
    http://digital.ni.com/public.nsf/websearch/273BB58D3B52CE6886256F3B00714D03
    The device registers as an HID and the above link says that I would have to
    change firmware to fix the problem. That's not going to happen because the
    hardware is made by another Mfg.
    Any other ideas for communication to my USB/HID device? All I need to do is
    write and read data from it. The device driver shows an hid.dll. I wonder
    if I could call the DLL to accomplish what I need to do. The problem is
    that I don't know where to find documentation to setup the DLL call.
    - Neal
    "Matt_S." <[email protected]> wrote in message
    news:[email protected]..
    > That depends. If this device is part of the USB TMC standard, you can do
    > the steps in the following KB.
    >
    > http://digital.ni.com/public.nsf/websearch/044FA220F32774ED86256DB3005850CA
    >
    > If not, use VISA to create a USB Raw device driver for it.
    >
    > http://digital.ni.com/public.nsf/allkb/E3A2C4FE42D7ED0D86256DB7005C65C9
    >
    > Best of Luck!
    > -Matt S.

  • ThinkPad T60 USB Ports and Human Interface Devices

    Hi. I have a Lenovo ThinkPad T60 and an HID gadget.  When I try plugging it into the left vertical USB port, it installs and works just fine; however, when I try plugging it into either USB port on the right side, it always malfunctions and doesn't install or work correctly.  Is there any solution to this error, and what's exactly causing it? I've tried the following:
    -Updating laptop BIOS
    -Reinstalling all USB drivers
    -Reinstalling the driver of the device
    Thanks in advance for some advice.

    I believe you'll find the right side usb ports are part of a separate usb card that connects to the motherboard with a cable, the ports on the left go directly into the motherboard. If the ones on the right aren't working, then you may have a bad usb card. This part can be easily damaged too, bumping a device while plugged in can damage it. 
    The easiest way to test it would probably be to get a known good usb card and plug it into your motherboard. I believe this can be done temporarily as a test with only partial disassembly of the laptop. Replacing the part would require removing the systemboard/frame assembly from the lower case. I believe you could test if a new card solves the problem by removing only the keyboard and plugging it into the motherboard. It's hard to be sure without knowing exactly which T60 you have, and without having one in front of me to refresh my memory.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • DROID Charge Bluetooth Sync With Acura TSX (Handsfreelink) issues

    I have an Acura TSX 2011 w/Tech Package. I have a lot of trouble with pairing this Samsung Charge with the TSX. I had samsung Omnia Previously and there were no issues with pairing that phone with this car. However, Samsung or Verizon must fix this issue completely for Samsung Droid Charge, or I have to pursue legal channels to obtain compensation. There is no way I am letting verizon or Samsung off the hook. 
    If I can't use Bluetooth (one of the most basic functions now on any Smartphone) I have to either hold my phone in my hand while driving or use speakerphone (also have to hold that while driving). In Connecticut, it is illegal to drive while on the phone at the same time. If Verizon cannot get this issue fixed, then I have to report this to the Attorney General and seek legal remediation because verizon is legally obligated to provide phone that supports handsfree in Connecticut and that includes Bluetooth. 
    Hopefully someone at verizon is reading this.
    Good Day!

    Ok I do not have a 2010 TSX tech but I tried it in a 2011 TSX tech and guess what! it worked on that one also. I would like to reflect back to when I was all over this forum complaining about my Bluetooth issues. I have a Pioneer navigation system in my car that has bluetooth calling and audio capabilities. When I was swapped out from the Thunderbolt to the Charge I was very disappointed to find that my new Charge would not work on my Pioneer and my Thunderbolt was perfect. I excepted it because I hated the Thunderbolt so much at the time because I just wanted a phone with a good data connection and no rebooting. So after sadly entering my car for weeks on end without being able to use my bluetooth audio I just decided to try it again. This time magically it work and has ever since. The VZW peeps were glad to hear this because it would be one last thing I was jumping down their backs about but I was sadly disappointed that they didn't take an interest as to why weeks later I have a connection. This seems to be the case also with these TSXs because I drove a few and again was angry that they didn't work but today as I go out and try to give you a gleam of hope I find that ( aside from some slightly poor audio quality ) the dang thing is working. So I guess it's up to the Samsung Bluetooth gods to decide if they are going to grant you your Bluetooth wishes. Wish I was more help but it looks like you're either going to have to deal with it, get a different device, or pray for a cure. 
    ChristinaB_VZW From what I gather from all this is maybe when you send this info to product investigations tell them to try a new device and not one that has been used. Just a thought but even a used one should have the popping crackeling noise coming through. So I guess there are two issues. Thanks G

  • Droid Charge - USB Device not recognized

    Recently, I was directed by Verizon to reset my Droid Charge to factory settings, since I did that, I can no longer connect via USB to any computer, Win 7 and XP.  To this point, I have tried multiple cables, multiple USB ports, multiple computers.  On my home computer, I disabled all USB ports and reloaded drivers and still nothing.  I have the phone set to "Ask on connection", but still nothing.  The phone shows charging, but, I cannot see the device in Windows.
    Thoughts anyone?
    Thanks

    Keven,
    Right now I am out of good ideas but for general info when I have the USB Debugging UN-checked and connect my Charge phone I  hear two short tones and my XP explorer shows two new folders.
    Verizon Mobile F:  This one shows info on the phone such as the name of the driver, etc.  It says the driver is 1.3.2380.0
    Removable Disk G:  This one is the removable Disk G that contains all the folders in the phone.  The one you are trying to get to.
    Maybe, if you have a copy, try to reinstall the Samsung USB driver.  It will not hurt to try.  You can always reload a driver.
    JerryF

  • Samsung DROID Charge officially hitting Verizon on April 28th for $299.99

    Has anyone considered getting the Samung Charge reported to be out on April 28? 
    http://www.droiddoes.com/charge/ 

    TBhouston wrote:
    Wildman wrote:
      Didnt think so but I figured I would through it out there....   Ann I am still strongly concidering joining you and get me a Thunderbolt.....    The sales man was telling me that this phone would be better, I dont think so. plus me and Samsung hasnt got alone..
    same size screen,lighter, super emeled screen (which I think is the best screen out), think it will run a bit smoother because of onboard rom
    dealing with touchwhiz is not so great to me
    for me i still like the thunderbolt, but the screen on the charge is super crisp
    If you make the device out of low grade plastic of course its lighter.
    The Super Amoled screen is clear to a point but has way to much blue tint plus the screens have been reported to develop a burn in issue, they have to improve that before I see that as better.
    On board RAM helps but a 1Ghz Hummingbird...
    Also I hate the Touchwiz, Blur is better and I hate it also but I will do Blur over Touchwiz
    Samsung Droid Charge Specs
    Networks:
    CDMA 800 and 1900, LTE 700
    Operating system:
    Android™ 2.2
    Display:
    4.3-inch Super AMOLED Plus screen (480 x 800)
    Camera:
    8MP rear camera, LED flash, auto-focus, 1.3 MP front facing camera
    Memory:
    Unknown
    WLAN:
    802.11 b/g/n Wi-Fi
    Bluetooth:
    Bluetooth 3.0
    GPS:
    A-GPS
    Battery:
    1500 mAh LiIon battery
    Special features:
    Droid branded, HDMI out, 4G Mobile Hotspot,
    Chipset:
    1 GHz Hummingbird processor

  • ADB interface device driver

    When I plug-in the usb on my computer/vista opsystem, I get a message to load a "Motorola ADB interface device driver?  How do I get this driver, if needed?  Phone seems to be charging and working normal, but couldn't figure out downloading pics the other day and wonder if that is the problem?  I am senior citizen and not exactly a computer "geek".  Mean that in a complimentary manner.

    jimfitzgerald says:
    > Do a Google search on your computer.  It should come up.
    What an absolutely brilliant idea, Jim! Why didn't I think of that!?
    ACTUAL ANSWER
    For those of you who want something other than "JFGI," I managed to track down the real ADB drivers for the Motorola Droids:
    http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • Can I unlock my Droid Charge and use it with a sim card in India?

    How can I unlock my Droid Charge and use it with a sim card in India?

    You just have to call VZW Global TS and as long as you meet all of the requirments you will be able to unlock your phone.
    Must be a Verizon Wireless customer.
    The device being unlocked must be active on a VZW line of service.
    The line of service must be active for at least 60 days.
    For converted accounts from acquisitions or mergers (i.e. Alltel, Unicel/RCC, etc.), the line of service must be active in the VZW billing system for 60 days from the conversion date.
      The line of service must be in good standing for the past 60 days.  Good Standing is defined as:
    Balance must be current 
    No service suspensions or hotlines in the past 60 days.
    Customer may only have one 3G SIM unlock per line every 10 months.
    The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with VZW.

Maybe you are looking for

  • RTC-5161 Error when deploying a MAP

    Hello, I recently upgraded OWB 11.1.0.7 to 11.2.0.3 and within the Design Center, I receive error RTC-5161 when deploying a MAPPING. My process flows and all other objects deploy successfully but the MAPPING pops up the RTC-5161 error Here is how I w

  • SRM and SRM-MDM: Error when ordering less than Price Base Quantity

    Hi! We face the following issue: We have an item without material master in the MDM-catalog. The price is scaled, and 5.00 EUR up to 100 items, and 4.80 EUR for more than 100 items If we order 90 items, the price is calculated to 5.00 EUR in MDM, BUT

  • Adobe Form via RFC - spool order

    Hello experts. When I'm calling an Adobe Form via RFC I'm not getting the spool order in the target system. The Form is issued with:   fp_outputparams-device  = 'PRINTER'.   fp_outputparams-NODIALOG = 'X'.   fp_outputparams-DEST = '5175'.   fp_output

  • Kernel Trap during update to 10.9.3

    Hello, During the installation of the update containing 10.9.3, iTunes 11.2, and Digital Camera Raw Update 5.05 I received a problem report listing a kernal trap. The installation process took a very long time but finally it did restart and the Probl

  • Trouble opening attachments in Bridge messages

    I can't open attachments. When I tap the attachment, I get a message that says: "attachment too large". I'm sure it's something simple....any help is appreciated.