Bluetooth immediately disconnects after connecting...

After i pair my laptop & 8800, it immediately disconnects.
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 10.0
Build 6822
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 1.4.1
Build 4
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
It's very frustrating. Can someone pls help?
cheers

Hi,
Have you tried Microsoft bluetooth driver?
(If you want to try it, uninstall widcomm bluetooth stack and restart PC...if microsoft support your bluetooth hardware, it install driver automatic. After restart,try to run PC Suite > "Get Connected")

Similar Messages

  • My I PHONE'S Face Time was automatically disconnected after connecting

    Dear all,
    I m facing a big problem with my face time which is automatically disconnect after connecting... I try to reset my network with forget network and connect network  again... It s doesn't use... what can I do to let it doing well ? Pls help me.. Thanks.

    Hi raineekhor,
    If you are having issues with FaceTime on your iPhone, you may find the following article helpful:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Regards,
    - Brenden

  • Bluetooth headphones disconnecting after pausing video content on Yosemite.

    MacBook Pro (Retina, 13-inch, Mid 2014)
    Yosemite 10.10.3 (latest public beta)
    (short) My Beats Studio Wireless headphones will disconnect after pausing video content.
    (long) My headphones will connect without issue. However, after watching video content (either on Safari or QuickTime), the headphones will disconnect from bluetooth. To re-connect, I must turn the headphones off then back on. I have read the bluetooth faqs and there are no solutions addresses this issue. I have had moderate results by removing com.apple.bluetooth.plist and re-pairing my devices, yet, the problem returns after watching video in Safari. This problem only persists on OS X. I have tested the headphones with Windows and iOS and they work as intended with no dropouts.  Any ideas?

    Hi tlacroixia,
    Thank you for the response. Because this is not happening when your computer goes to sleep, the first troubleshooting steps I would recommend would be to reset your computer’s PRAM and SMC. Please follow the instructions located in the attached two articles below to complete these steps, and again, please let me know if the issue continues. 
    OS X Yosemite: Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Cheers,
    Joe

  • Ipod nano connects then immediately disconnects after plugging in to USB

    i have never had this happen before. as soon as i plug it into the usb port it comes on. then about 5 seconds later it shuts off the connection. i go to "my computer" and it goes away.

    First, try a differnet USB cable, and a different USB cable if possible.
    If that doesn't help:
    Connect the iPod and open Device Manager
    (Click Start, right click My Computer, click Manage, click Device Manager in the left-hand column)
    Scroll to Universal Serial Bus controllers and click the plus symbol to expand it
    Do you see the iPod?
    If you see something with a red "x" on it, right click on it and click Enable
    If you see something with a yellow ! or ? try right clicking on it, click Uninstall, and then restart the PC with the iPod connected.
    -CG

  • Bluetooth getting disconnect after Android update to Kitkat

    Hi,
    after update to Android Kitkat i have problems with my bluetooth connection. It disconnect all the time my headphone( oryginal Sony headset). Before this update everything was fine and it works perfectly.
    Can somebody help me with it?
    Regards

    Have you reset the headset and repaired it since updating your handset?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Bluetooth mouse disconnects after sleep in W540, Windows 8.1

    I have paired a bluetooth mouse and it works fine - until computer has been in sleep. After sleep the mouse does not work until I go into settings - Change PC Settings - PC and Devices - Bluetooth. I do not have to do anything, it just connects when "Manage Bluetooth Devices" opens.
    I have looked into forum and swithed off the "allow the computer to turn off device to save power" in device manager for device Intel Wireless Bluetooth 4.0 + HS adapter. No effect.
    I have Windows 8.1. The mouse worked fine in my older HP laptop with Windows 7.1

    Hi @dindanas,
    Your ProBook 4530s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Wifi disconnects after connecting for a few seconds [SOLVED]

    I have an interesting situation and perhaps you guys can give me a hand.
    I'm installing Arch on a system that only has a WiFi; no big deal.
    So, I get the live CD and
    1. Start it and choose the network install (that's the only choice for this CD)
    2. Go to tty2 and issue the following commands:
    a. ifconfig wlan0 up
    b. iwlist scan and I get:
    wlan0 Scan completed :
    Cell 01 - Address: 00:17:3F:93:05:63
    Channel:1
    Frequency:2.412 GHz (Channel 1)
    Quality=38/70 Signal level=-72 dBm
    Encryption key:on
    ESSID:"ITTwo-wifi"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
    36 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=00000010fe6584f5
    Extra: Last beacon: 60ms ago
    IE: Unknown: 000A495454776F2D77696669
    IE: Unknown: 010482848B96
    IE: Unknown: 030101
    IE: Unknown: 2A0104
    IE: Unknown: 32080C1218243048606C
    IE: IEEE 802.11i/WPA2 Version 1
    Group Cipher : CCMP
    Pairwise Ciphers (1) : CCMP
    Authentication Suites (1) : PSK
    IE: Unknown: DD07000C4303000000
    That's a good sign
    3. Issue the command to link
    iwconfig wlan0 mode managed essid ITTwo-wifi key "s:bbR\:\)cri2rr" retry 7
    4. Test for association with iwconfig wlan0:
    wlan0 IEEE 802.11bg ESSID:"ITTwo-wifi"
    Mode:Managed Frequency:2.412 GHz Access Point: 00:17:3F:93:05:63
    Bit Rate=1 Mb/s Tx-Power=20 dBm
    Retry limit:7 RTS thr:off Fragment thr:off
    Encryption key:6262-525C-3A5C-2963-7269-3272-72
    Power Management:on
    Link Quality=39/70 Signal level=-71 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:1 Invalid misc:0 Missed beacon:0
    looks good so I do : dhcpcd wlan0
    and it fails, over and over and over ...
    Then after much testing I realized that if I issue the iwconfig wlan0 say 5 seconds apart on the first one it shows, as above, that is connected
    and in the second one
    wlan0 IEEE 802.11bg ESSID:off/any
    Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
    Retry limit:7 RTS thr:off Fragment thr:off
    Encryption key:6262-525C-3A5C-2963-7269-3272-72
    Power Management:on
    It's not associated   !!!
    I have exhausted testing options to no avail?
    Am I missing something obvious ... or not so obvious?
    Any help/ideas will be appreciated.
    R
    Edit:
    The card is a Linksys and the chipset is recognized as : Linksys WUSB54GC v3 802.11g Adapter [Ralink RT2070L]
    Last edited by ralvez (2011-02-09 01:08:29)

    Thank you for the reply guys!!
    @treysis, In the logs I got an error something like "<eissid> deauthenticated (reason 6)" or something to that effect and I was wondering what that means... I suppose you are correct and that the system is trying to tell me that I need to use wpa_supplicant. I hope that's part of the install CD
    I'll give it a try and I'll report back .
    Thanks for the help and ideas.
    R.
    edit : bad typing
    Last edited by ralvez (2011-02-08 19:37:49)

  • [Z3 compact] Bluetooth headphones disconnecting after unlock screen

    I've just encountered a strange issue while listening to music over bluetooth on my Sony MDR-10rbt headphones (connected in high quality mode, aptx codec used). It's fine until you try to unlock te screen, it then immediatly switches to play the music over the normal speakers at maximum volume. At home not so much of an issue but in a quiet office environment very annoying, even more so if people don't tend to appreciate my choice of music
    The strange thing is, in the walkman software it still says it's connected to the headphones (throw icon glowing) and even the BT icon in the bar is white and not light grey so it's still connected as far as the phone is concerned.
    The Z3 compact is on 23.0.A.2.105 and the headphones are fully charged.
    I also have a Z2 (the Z3 compact is supposed to replace it), that does have the same behaviour. That's running 17.1.1.A.0.402.

    You should contact Sony directly
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • RDS - New users immediately logsoff after log on

    I am running Windows 2008 R2 server with Remote Desktop Services. New users are immediately logsoff after connecting to the server.
    When I exclude the new created user from the GPO's the session will logon.
    If the problem occures event id 1542 - Microsoft-Windows-User Profiles Service is created. Any ideas?
    Log Name:      Application
    Source:        Microsoft-Windows-User Profiles Service
    Date:          30-5-2013 10:38:36
    Event ID:      1542
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      terminalserver.domain.local
    Description:
    Windows cannot load classes registry file.
     DETAIL - The system cannot find the file specified.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
        <EventID>1542</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2013-05-30T08:38:36.619393600Z" />
        <EventRecordID>100791</EventRecordID>
        <Correlation />
        <Execution ProcessID="1148" ThreadID="32220" />
        <Channel>Application</Channel>
        <Computer>terminalserver.domain.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="Error">The system cannot find the file specified.
    </Data>
      </EventData>
    </Event>

    Start Group Policy Management, run rsop on the computer and user with problems. Rightklick in the left pane, Save Report

  • I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

    I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

    Morning Indrajit Chatterjee,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Best of luck,
    Mario

  • Aspire V3-571 Bluetooth disconnects a few seconds after connecting

    I have paired a plantronics M70 bluetooth to the laptop.  It connects but after a few seconds becomes unconnected but stays paired.  I am running Windows 8.1.  I have re-installed all the bluetooth drivers.   

    I have the same problem here. No replies from acer yet. Perhaps we need the drivers.My bluetooth started working after I reset my computer but stopped working again a month later.Help please.

  • After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect.  Help?  Have also reset network settings etc

    My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg).  It was the first time I'd used Bluetooth
    Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
    This is major as I am away from my desktop for three months.  Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
    So far This is what I've tried based on other discussions-
    -turned Bluetooth off and unpaired to keyboard which was also turned off
    - turned iPad wifi off and on (several times)
    - forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
    -- reset network settings
    What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling".  Sometimes the airport bars will show, but disappear or flicker.  It never connects with a check noted in settings.   Any attempts to use internet confirm there is no connection
    My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
    Any ideas!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Disconnect or connect the bluetooth makes MacBook Pro restart.

    I have a MacBook Pro 13 inch, mid 2010, running OS X 10.9.2.
    Everytime (well, most of everytime) when the bluetooth disconnects from my wireless device,
    Such as:
    *Out of bluetooth distance
    *Manually turn off bluetooth connection on macbook pro
    *Switching off bluetooth on mouse (means connection dropped with the mac's bluetooth)
    *Bluetooth device out of batteries (means connection dropped with the mac's bluetooth)
    *Connecting bluetooth mouse to macbook pro
    *Turning on bluetooth (and then when its auto trying to connect to bluetooth device)
    From all the incident above, not all at a time, but time to time, performing one of the event above will cause my MacBook Pro to restart / force restart it self.
    Sometimes it comes with an white error note screen after restart, asking press anybutton to continue. Anything related to bluetooth disconnecting and connecting makes mbp restart and it's really getting me annoyed and frustrating.
    My macbook pro just out of the service center less than six month ago, replaced / fixed / tested all the parts for the best condition as it should, no problem at time. Just found or realise this bluetooth issue last two months. Been looking some websites seems like no issue arround similar to this, so here I am with this thread.
    I wonder anyone else suffer from this, or some expert will have some magic advise to fix this issue? Software or hardware problem? I hope it is not hardware as I just literally have all brand new hardware since last service. The problem should not come this soon.

    did you try to Browse Device on Mac Bluetooth at the top-right corner? I faced the same problem but it was worked after I made macbook find my phone bluetooth.

  • Bluetooth keyboard lags and disconnects after upgrading to Yosemite

    After updating to OS X Yosemite, I'm having serious bluetooth issues. The keyboard will sporadically stop working and I'm not able to type anything. When I check the bluetooth in the top menu bar, it says it is still connected even when it's not working. The other thing it does is lag veryyy badly. At first it will appear that it's just stopping again, but then the first letter will show up with the option for all the other versions of the letter like it does when you hold down a key. After about 3 seconds the next letter I originally typed shows up and follows suit. It does the same "holding it down" thing with the space bar and delete key as well, so you can imagine my frustration when a chunk of what I just wrote out is deleted and there's nothing I can do to stop it. The lag and this repeating key thing is so severe that I literally cannot get anything done. I'm a graphic designer so I need to use a mouse and keyboard together all day long and this is making it impossible for me to get anything done.
    The only thing that seems to get it back working again is opening the keyboard bluetooth preferences, turning OFF the keyboard, waiting a bit, and turning it back on. And this only works some of the time. It will say "connected" right after I turn it back on but still won't let me type anything. After a couple tries it'll start working again.
    I also have some issues with the mouse disconnecting but connects right away when you click. However, I now use a Wacom tablet so I don't have a need for the mouse anymore. The key shortcuts on my tablet will stop working at some points too, so I know the keyboard is my biggest problem.
    I installed the Yosemite update (10.10.1) this morning, hoping that would save the day and I'm still having the same problem. I've had to do the "turn off keyboard" thing 3 times already in this post. I also reset the PRAM and rebooted a couple times-- still nothing. I'm at my wit's end with this thing, and I can't find any answers online. I'm about to chuck this keyboard out into this 5 feet of Buffalo snow.
    If anyone can pleaseeee help me I would be greatly appreciative. Thank you!

    USB mouse and built-in trackpad work fine, but I have a similar issue with the Magic Trackpad which leads me to believe it is a BT issue.
    My phone does have BT switched on, but I never had any problems like this with Lion, which suggests ML is the issue.
    I did just find a solution that seems to work, although it's not permanent.
    One guy figured out that the problem happened more frequently after waking from sleep (same is true for me), and turning the BT radio on and off helped. He made a command-line utility to do that.
    Seems to work for me so far.
    http://www.frederikseiffert.de/blueutil/

  • Screen sharing connecting then immediately disconnecting

    I've recently bought an Intel Mac Mini for my Mother to use, and installed it at her place with Leopard. I'm running Leopard on my Macbook pro, and was hoping to use iChat screen sharing to solve problems for her. Now my problem here is that when I try to initiate screen sharing, the connection goes through, and sometimes (but not always) we see the large writing across the screen, but then it immediately disconnects citing the inititiator as disconnecting the screen sharing session. This happens whether I initiate screen sharing or my mother does.
    I am on a 10+ meg broadband connection with 700kb upload, and she's currently on a 2 meg connection with 256 + kb connection. Is this part of the problem? I've opened port 5900 on her router to pass through to her computer. Also internally on my network ichat sharing works as it should.

    After an hour if pulling out my hair, I finally had an idea of what might be causing the crash... I noticed I had my old iSight plugged in (the external firewire iSight) into my Apple Cinema Display. I unplugged it and iChat screen sharing worked PERFECTLY. You should also know that I don't have problems with my iSight, it works well on Video Chat and Audio Chat and even presentation mode but, it screwed up screen sharing.
    In conclusion, if you're experiencing sudden connection losses with iChat screen sharing, check to see if you have an iSight plugged into your Mac and unplug it.

Maybe you are looking for