Bluetooth in a Car and Lock Code

Hello,
in our companny we use Nokia E51 Phones, and we use Mail for Exchange to syncronisize. Our Policy request a lock code every 15 minutes. The Problem is now when the Phone is with Bluetooth concectet to a Car, you can only make calls if the lock code is not active. If the Lock Code is Active you must type the Code into the Phone and then you can make a call over the car.
Is there a way to disable the lock code for the time the phone is conectetd to the car ?

Nobody have notice this problem or have a tip for that?

Similar Messages

  • Bluetooth problems with car and iOS 8

    Since I uploaded the new iOS 8 on my iPhone 5s I can't get the bluetooth connection working anymore in my Volvo XC60. It pairs but then it doesn't work. Can't receive calls, can't make calls. Nothing happens! It just says "Calling" and the number shows, but nothing happens. I tried also to pair my old iPhone 4 which has iOS 7.1.2 and that works great, just as my iPhone 5S did before with the iOS 7.1.2 version. So this really seems like an iOS 8 issue, unless something has happened with the bluetooth hardware in my iPhone 5S... Any ideas?

    Hello,
    I have an iPhone 4 and iPhone 4S under 7.1.2 and they work perfectly with my car bluetooth (Land-Rover).
    I have now an iPhone 5S, that was delivered with iOS 7.1.2 and after updating in OTA mode to iOS 8, it worked fine also with my car.
    BUT I preferred to make a clean install of iOS 8 on the 5S (bad idea ...), and now it does not work anymore, I can pair and connect the phone with the car, but it is impossible to send or receive a call and the car says "no signal" (for GSM network).
    After resetting network preferences, the car sees the GSM network again (but impossible to send or receive a call ...), and after rebooting the phone, the car says "no signal" again (and of course no call).
    I have tried to unpair, pair again, reset again network preference, but no succes.
    I think that obvioulsly iOS 8 is faulty, and Apple guys, if you read me, I think it is really a pitty from Apple to deliver this OS with such bug without giving possibility to downgrade !!! (if possible, I would immediatly come back to iOS 7.1.2, waiting for the fix).
    I HOPE it will be fixed quickly now !!!

  • When I try to download a song it tells me I need to sign in and when I put my billing information including my credit car and security code it tells me my security code is invalid.

    So I recently was like signed out of my iTunes account on my iPhone. Now when I try to sign it and let's me and all but when I click to download something it tells me I need to sign in and provide my credit card number and the security code. When I do all that it says the security code is invalid and won't let me download anything. Can someone tell me what to do?

    Hello
    I am having the same issue, I now my card number as well as the security code is valid so i am not sure what the issue is...CAN SOMEONE PLEASE HELP US?!

  • 9860 Bluetooth problems with car hands-free

    I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
    If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
    Any ideas, please?
    Thanks!
    Solved!
    Go to Solution.

    Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
    Dave

  • How do I play music through Bluetooth in my car

    I can make & receive calls through my Bluetooth in the car and can also listen to my voice memos. But if I press play on my music whilst connected to my Bluetooth in the car it only plays on the phone itself. How do I listen to it on the speakers in my car. I have the iPhone4 but have updated the software to 5.0.1.
    Many thanks I

    Which car?
    TTBOMK an iPhone doesn't transmit music over BlueTooth.
    I know in my car in order to hear music I must connect the cable provided in my car.
    Allan

  • E52 - problem with lock code and bluetooth connect...

    I have an E52 as my work phone, and due to company security policy, a lock code and autolock (30 minutes max) is mandatory. This is giving me problems when using bluetooth headsets, regardless of the make (Plantronics, my Garmin GPS, and latest the built in Fiscon in my car). As long as the phone is not locked, everything works fine, I can make and receive calls. But, when the phone locks, I am no longer able to make calls. In the car (both on the GPS, and on the built in connection) I can still browse the phone book and select a number, but when I attempt to dial, nothing happens.
    If I enter my lock code, I can make calls without problems. However, it sort of defies the purpose of having a rather expensive hands free kit in my car, if I can only make calls the first 30 minutes of my ride.
    Is this a known problem, and is there a solution?

    This is not a problem as such, more of a design flaw.  It is not possible to make a call when the phone is locked, I guess the only way around the issue is just to press a button on the phone every now and then.  Say every 15 to 20 mins just push the menu button or any button randomly, that should reset the timer back to 30 minutes until it is locked next.
    Hope this helps.
    Everything should be made as simple as possible, but not simpler.
    Nokia E7-00
    Click the white star if you think I helped you please

  • When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

    When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

    I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

  • I forgot my lock code and I want to format or rese...

    Hi people, I have tried to format or reset my Nokia N81 for some time now. I have tried the 3 button stuff and all the other stuff posted online but couldn't work because I still need to get pass the lock code, which I have forgotten.
    Please what do I do?

    owaiz wrote:
    my n81 orignel code was change i have forgot my new code
    you have to take the phone to a Nokia Care point.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • The upset :-( Bluetooth and Locked Screen

    Hello
    I put off upgrading because my ipod was perfect.
    I decided to suck it up and update it over the weekend and never regretted anything so much.
    Firstly, we have just got a new car and the only requirement I wanted from the car was the bluetooth streaming - I can't cope without having my tunes blasting away in the car.  Worked perfectly until the upgrade but now the control buttons don't work in the car at all anymore and it used to pick it up straight away and just play.
    I've tried deleting the phone from the car and starting again but nothing :-(  I can't drive with my ipod connected now since I would have to click on the device to change the tunes - not safe!
    Also, the ipod buttons when the phone is locked do not work anymore and I have no clue why.  I've gone through settings and can't see anything.  The buttons are there but don't work........does anyone have any suggestions?
    If anyone has any suggestions at all I would greatly appreciate it.  I really really hope this obvious bug is sorted soon.
    Thanks.
    Dx

    Have yo went to the car manufacturers support site?
    Is there a firmware update available for the car system?
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    Otherwise, sometimes a iOS update breaks compatibility and you will have go wait for an iOS or firmware update for the car system,

  • Is there a way to get a log of the bluetooth devices my iphone has been connected to?   My Bluetooth car speaker phone was recently stolen from my car and appears to be on Craigslist.

    Is there any way to get a log of the bluetooth devices my Iphone has been connected to?  I recenly had my Bluetooth Jabra stolen from my car and now a simliar one is on Craigslist.  I'd like to give my connection log to the police before I go and see if my Iphone recognizes the device in question.  Any way to get any type of bluetooth device connection log out of my iphone?

    Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
    The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
    "Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
    http://support.apple.com/kb/HT1414

  • I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

    I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously.  The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

    You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

  • I am trying to restore my iPhone 5 and my screen is no longer able to use and there is a lock code on the phone, how do i restore the phone without having to use the phonne?

    how do i restore my iPhone with a lock code on the phone and the screen is completely unable to use?

    Forgotten Passcode or device disabled after entering wrong passcode
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • HT201401 since iSO 7.02 update bluetooth with my car is no longer working at all. also can no longer access my mail! the browser is turned off and I can not turn it back on!!!!!

    last week my phone was automatically updated after a trip to Europe, now I can no longer access gmail because the browser capability for cookies has been turned off and I can NOT get it back on. Before the trip bluetooth was on partially working with my car and now since the newest update works no more in any form. Anyone else having these problems? Need help!!

    As far as automatic update, the iOS cannot be updated without user intervention, so it could not have been automatically updated.
    You need to provide more information about your mail. Does this mean you cannot access the Mail app, you cannot download mail, or what? Not sure why you cannot access the cookies setting in Safari. Go to Settings>Safari>Block Cookies>set to what  you want.
    Problems with 3rd party Bluetooth devices, such as car audio, etc., generally has to do with vehicle manufacturers not providing updates to match the current Bluetooth stacks that are found in today's phones. You can go into the phone and remove the pairing for the car, and then go into car settings and remove the iphone. Then put both devices back into pairing mode and attempt to connect them again. See this support document http://support.apple.com/kb/TS3581

  • Bit locker code /letters wont go in, even when I cut and paste it all in, it doesn't go through. I'm new to computers. Is this a con to get us to download shite?

     Hi, I forgot my memory stick code. My bit locker code letters wont show on screen, even when I cut and paste it all in nothing happens, is this a con to get me to download shite I don't want.

    Hi Franko,
    We discuss SQL Server PowerPivot for Excel related issue in this forum. According to your description, it is more related to Windows Security. I would suggest you discuss this issue at the following forum for better support:
    Windows Security forum:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprosecurity
    Regards,
    Elvis Long
    TechNet Community Support

Maybe you are looking for