Bluetooth install doesn't match manaual...help
Hello. I purchased a Bluetooth Dauther Card (60Y3303) per the instructions from a Lenovo tech for my T430 2342CTO but when i referenced the diagram in this manual (t430_t430i_hmm_en_0b48304_03.pdf), it did match. I don't know where to install it now and it's not real evident. Can anyone help? Thanks.
Solved!
Go to Solution.
Nevermind...turned out to be on the underside of the keyboard cover instead of on the laptop itself. Sorry.
Similar Messages
-
Help! My Bluetooth keyboard is not writing what I type! What I mean is that when I type the letter "h" for example, it shows up as a different letter. None of the keys match! What is going on?
The missing Albums may be ones where the Artist is not listed as also being the Album Artist in the tag. Try going to Settings>Music and turn Group By Album Artist to Off. See if the missing albums now show in the Artist view. If so, you can either leave the setting this way, or if you prefer it to be on, go to iTunes on your computer and put the correct name in the Album Artist field of the tag (on the Info tab of the tab) for the albums in question and sync your phone.
-
I recently uploaded my add-on, i.e. Anonify Browser to AMO @ https://addons.mozilla.org/en-US/firefox/addon/anonify-browser/ . But when I tried to install it to from Add-on display page. It failed to install. I refreshed page many times but no effects, still same error shown.
The Mozilla Add-ons website support forum is here:
https://forums.addons.mozilla.org/ -
Version of kernel installed doesn't match what's running
This seems to me a very newbish question... I've just run `sudo pacman -Syu` to upgrade my system, and it seemingly went fine. When I reboot, the list of running kernel modules is much much smaller, the text on my screen is much bigger (suggesting a video driver switch?) and the kernel seemingly hasn't upgraded (`uname -a` still reports 3.16.1-1, instead of 3.16.3-1). Anybody know what gives? It's probably a simple solution, but I can't figure it out... thanks for reading.
There are a lot of threads around here where that is the root cause of a lot of problems. The most common reason for that is that your boot partition was not mounted at /boot when you did the update. That means that your new kernel is in the directory /boot, but the kernel that was loaded by your boot loader is on your boot partition.
Look at /boot.
Mount the boot partition on /boot
Look at /boot
Did the contents change? If yes, do a pacman -Syu and ensure that your /etc/fstab is configured to mount that partition by defualt
Edit: Moving to Newbie corner
Last edited by ewaller (2014-10-06 00:08:54) -
Those two pieces, where LCD and keyboard installed doesn't match when close
when i close MacBook, push the LCD back to keyboard.
the top piece has a 3mm offset. I means, it like this
ooooooo
_ooooooo
but it should be
ooooooo
ooooooo
i was try to push the top layer to normal position, but not works.
it was good before, i don't know why it start shift.when i close MacBook, push the LCD back to keyboard.
the top piece has a 3mm offset. I means, it like this
ooooooo
_ooooooo
but it should be
ooooooo
ooooooo
i was try to push the top layer to normal position, but not works.
it was good before, i don't know why it start shift. -
I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection for my Philips bluetooth headset doesn't work anymore. Does anybody have a solution?
I have checked the headset on another Iphone with iOS 4 and it works well.
Thanks for your help!
Pierre (from Paris - France)Bonjour Pierre,
there seems to be a bug in iOS5 with regards to Bluetooth. THere are a lot of threads in here on this. We're all waiting for Apple to fix this... -
Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.
Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.
-
I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me
What are you trying to connect the iPhone to and what is happening when you try?
-
I am trying to reset my password for apple id. I entered my d.o.b. tells me info doesn't match. I tried reseting through email but am not
getting any emails to reset it. HELP!Go to the Apple ID Security site from http://support.apple.com/kb/HT5699 or call the AppleCare support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team...either can help you reset your questions/answers.
-
I just upgraded my iMac to Mountain Lion and my bluetooth headset doesn't work. All I get is static. Worked fine with Lion. It doesn't work with my new MacBook Pro either.
I use the headset extensively talking on Skype and gtalk with my partner.
Help!!!If you've tried the SMC reset then try a Pram reset:
http://support.apple.com/kb/ht1379 -
I need to connect my bluetooth keyboard on my mac, but it doesn't have bluetooth installed
I need to connect my bluetooth keyboard on my mac, but it doesn't have bluetooth installed. eMac 2004 running 10.4.7 Tiger.
In the case you have explained you will have to do some shopping around. I am sure there is something out there that is available and will work with a Mac. The key here though is it must have the software available with the Keyboard or Mouse to insure that it will work on your older model Mac. Normally all you need to do is follow there instructions to a tee to make them work. I have 2 different items that work trouble free on 2 different Mac's. One other thing to keep in mind is you may have some trouble tracking down what you are looking for.
Here may very well be a place to start.
https://www.macsales.com/
CHEERS
AND GOOD LUCK ON YOUR QUEST.
DON -
I am trying to update my bank information in iTunes and I keep getting an error message stating it doesn't match my bank information. I also have 9 pending charges from iTunes. Please help
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
[help] images colors doesn't match
Hello, when I place an image inside a new document the colors doesn't match with original.
For sample I save in tiff format from photoshop a rich black (70% 50% 30% 100%) when I place inside illustrator I get (86,01% 84,97% 78,95% 100%).
The color profile are syncronized and I use Europe General Purpose 2 (CMYK Coated FOGRA27 ISO12647-2:2004)How do you know what values the bitmap image has in Illustrator? Did you pick up the color with the Color Picker? It's possible this originally picked up the value in RGB, and that got converted.
Does Illustrator have a CMYK separation preview such as InDesign, where you can measure the original TIFF values? If not, you can also save as PDF and examine that in Acrobat, using the Output Preview. -
Audio doesn't match video because repeated half way through
Hi guys,
I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
Video: ABCDEF
Audio: ABCABC
I have tried opening it in a different project and somehow it happens exactly at the same point.
I am totally clueless of what it comes from and getting really frustrated!
Any idea?
Cheers
BabsHello, I'm new to using forums like this. Is it appropriate for me to post that I'm having the same issue? Also sounds similar to Audio doesn't match video because repeated half way through as well.
My situation is:
Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
Multiple Nikon D7000 video clips I've taken play back fine except for the following clip. In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video. I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to. I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV. I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
Any help would be greatly appreciated. I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again. This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
Thanks for any help you can provide. I don't really know where else to go to figure this out.
Joel
My Premier Elements Project settings are:
Editing Mode: DSLR
Timebase: 23.976frames/sec
Video:
Framesize: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
Audio:
Sampe Rate: 48000 Hz
Output from MediaInfo
General
Complete name : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 1.46 GiB
Duration : 10mn 32s
Overall bit rate : 19.8 Mbps
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-15 03:24:05
NCDT : NCTG
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 10mn 32s
Bit rate : 18.3 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.368
Stream size : 1.35 GiB (92%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46
Transfer characteristics : BT.470 System M
Matrix coefficients : BT.601
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 10mn 32s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 116 MiB (8%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46 -
Bounding Box Doesn't Match Object (Illustrator CS4)
I'm not sure if this is an error on my part or a bug, but for the last week or so, the bounding box for my objects hasn't actually matched the objects. This is really problematic when I try to transform the object using the bounding box handles.
On occasion, after I transform the object the bounding box will match it again and will transform correctly. Sometimes it will stay off. If it does reorient itself, undoing the transformations back the original size will cause the bounding box to reset back to it's mismatched state.
Things I have tried to resolve the issue:
Reset the Bounding Box
Copying and pasting the shape to a different document
Starting a new document from scratch (I thought it was possible I corrupted the file)
Return Keyboard Shortcuts to the Default
Restarting Illustrator
Restarting my System
To my knowledge, my system hasn't been updated in the last week nor has anything new been installed. However, IT does push out maintenance so there is a possibiltiy that it was updated and I don't know about it. The only programs open while working in Illustrator are Bridge, Outlook 2007, IE8, Explorer, InDesign CS4, Word 2007, Photoshop CS4, Acrobat Professional 9, Dreamweaver CS4, PowerPoint 2007, Previewer and possibly FireFox 3.something (though not necessarily all at once - generally about 7 of the above listed). My system runs XP Professional SP3 with an Intel Core2 Quad @ 2.66GHz and 3.25 GB of RAM. The objects are not grouped, do not contain clipping masks, do not contain transparency masks and are not compound paths. They are simple paths/shapes, often rectangles.
I have included some pictures to better explain my issue. This first image indicates how the bounding box doesn't match the rectangle.
The second image shows the process of transforming the shape via dragging.
The third image shows the result.
Thanks for any help you can provide!Mr. Bugge:
Thank you for your response and I apologize for the delay in mine. I couldn't try all of the fixes immediately because I had to complete some job duties before I could tinker with this issue.
Things that did not work:
Closing Firefox
Clearing the Preferences
Moving the Preferences Folder
Deleting Temp Files
Closing Other Adobe Programs (Including Bridge Running in the Background
Things I cannot do for various reasons:
Re-installing Acrobat
Turning Off the Firewall (My Company Only Uses 1 Anyway)
Things I haven't tried yet but hope to try later:
Update Printer Definition or Change Default Printer
Check for Corrupt Fonts
Clear My Font Cache
Things I learned:
The issue is most easily recreated by transforming an object to a smaller object. However, zooming in will realign the bounding box but it will only stay aligned when zoomed in. I find it very curious.
Even if I don't end up finding an answer, I do appreciate your time and help.
Maybe you are looking for
-
IDOC to JDBC scenario-IDOC settings
Hi all i m doing an idoc to JDBC scerio and i have configured the settings and trying to trigger an ido and see whether i am able to post the data into the Db or not but i cant see idocs in XI:these are the steps i follwed posted in earlier forums:
-
Use of Allocation planning in campain
Hi experts can any one brief me the importance of Allocation planning in campaign.
-
Its is showing the wrong email... I can sign in on my computer but not the phone
-
Datasource.getConnection(username, password)
I was able to setup the bookstore example in the Webservices tutorial. In this example they make use of a JDBC connection, using JNDI contexts. I am using Tomcat 4.1.18 as Web container and I have a configuration file with the JDBC parameters. The pr
-
Ok, so I had to use a different computer than I did before because that one is totalled (both are pc's). I am positive I was signed in to my itunes account. So after I did the update the ipod was TOTALLY wiped clean, itunes didn't even recognize it a