Bluetooth IOS 5 issues with infiniti

Hello,
I am at a loss so far with my Iphone 4. I recently purchased the Iphone 4 about 3 weeks ago and was able to pair it with my infiniti G37 no problem. Well, after a week or so, I connected to iTunes and upgrade my IOS to IOS 5...BIG mistake...I am having intermitent calls through my cars bluetooth...it connects, then disconnects, the conmects, then disconnects...etc... Aty any rate, I need my phone to stay connected! I went from a droid to this iphone and I am seriously regretting this decision, as I had 0 problems ever with my droid. I have tried disabling the bluetooth, deleting it from both my car and my phone and reconnecting. I have done a hard reset, but nothing seems to work.
Question: when will apple be fixing this...it has got to be soon! I cannot pssobily work wityhout bluetooth and sicne verizon FAILED to mention this issue, I am stuck with this phone, that is of no use to me for my work...
HELP!!!

I've been having the same issue with my '08 G35. Apprently there is a problem with iOS 5 and Bluetooth; if you search this and other forums there are many reports of this issue with other manufacturersincluding Audi, BMW, Ford and Volkswagen. Also, aftermarket stereos and even some earpieces are having similar issues.
I brought my phone to the Apple Store in Birmingham and the "genius" told me it must be a car problem and I should contact a dealer. I contacted Infiniti Customer Support and the Bluetooth Department said there are no firmware updates available for the car. The rep also said he has been hearing about this problem a lot.
I called the Apple Store back and they backed off their "it must be a car problem" line. The employee said he would send some sort of report to Apple Engineering.
I have tried a hard reset of the phone after deleting the pairing from the car and the phone. It helped but the car still drops the phone randomly. I have also tried disabling then restarting Bluetooth right before I get in the car, also turning the phone to airplane mode then back to normal; neither reliably fixes the problem.
To me this is a more serious issue than the well-publicized battery problems. People use this feature to safely make calls. To have a system that will randomly stop working in the middle of a call is less safe than having no handsfree capability at all. Especially for people like me with a manual transmission.
Apple may want to think about fixing this before someone crashes his or her car.

Similar Messages

Wacom or Bluetooth Mouse issues with most recent Beta??

Wacom or Bluetooth Mouse issues with most recent Beta??
All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
(I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

Bluetooth buggy issues with iphone 5s after ios 8 upgrade

I am having issues with my Handsfreelink in my 2013 Honda Pilot after the ios 8 upgrade.Basically, music works the phone does not.
What I have tried:
1) Hard reset
2) deleted and re-setup all bluetooth settings on both phone and car
I suspect this is a bug in ios8 that needs to be addressed. On a sidenote I am also unable to plug my phone into the USB port on the car, now says unsupported.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

All OS X is really buggy - mouse lag, bluetooth dropouts, FCP X beachballs - iOS issues with iTunes = CRAP

I have had so many issues of late with both OS X Mavericks and iOS 8, that I am looking to change. Bluetooth dropouts that infuriate me despite swapping to brand new batteries, cleaning terminals, adding alfoil to hold the batteries more snuggly, etc; to FCP X constantly beach-balling (and I have 32GB RAM running with OS X running from an SSD); to itunes refusing to play any of my content on my new iPhone 6+. I have erased the phone twice and reloaded content after setting it up as a "new phone".
Is this April, and I have missed something?
Come on Apple, you have become an absolute JOKE. iCloud not working, iOS 8 not working, Bluetooth dropouts, I can't verify my new iPhone with iCloud Keychain for some unknown reason (wants me to reset and retry all the time).
If I wanted this cr@p, I would have stayed with W7....
Anyone else having issues with the new OSs?

Hi Bob,
Thanks for taking the time to have a look - EtreCheck output:
EtreCheck version: 1.9.15 (52)
Report generated 5 October 2014 4:09:54 pm AEDT
Hardware Information: ?
Mac Pro (Mid 2010) (Verified)
Mac Pro - model: MacPro5,1
2 2.66 GHz 6-Core Intel Xeon CPUs: 12 cores
32 GB RAM
Video Information: ?
ATI Radeon HD 5870 - VRAM: 1024 MB
LED Cinema Display 1920 x 1200
DELL 1703FP 1280 x 1024 @ 60 Hz
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 5:47:40
Disk Information: ?
HL-DT-ST DVD-RW GH41N
M4-CT512M4SSD2 disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
OSX SSD (disk0s2) / [Startup]: 511.12 GB (146.33 GB free)
Recovery HD (disk0s3) <not mounted>: 784.2 MB
WDC WD1001FALS-41Y6A0 disk2 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted>: 209.7 MB
1TB Internal (disk2s2) /Volumes/1TB Internal: 999.86 GB (312.63 GB free)
Hitachi HDS722020ALA330 disk1 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
DRAFT (disk1s2) /Volumes/DRAFT: 1.29 TB (975.89 GB free)
Alt Backup (disk1s3) /Volumes/Alt Backup: 711.95 GB (52.38 GB free)
Recovery HD (disk1s4) <not mounted>: 650 MB
ST3000DM001-1CH166 disk4 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk4s1) <not mounted>: 209.7 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
ST3000DM001-1CH166 disk3 : (3 TB)
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted>: 209.7 MB
disk3s2 (disk3s2) <not mounted>: 3 TB
Boot OS X (disk3s3) <not mounted>: 134.2 MB
USB Information: ?
Wacom Co.,Ltd. Intuos5 touch M
Generic Mass Storage 4.03 GB
S.M.A.R.T. Status: Verified
EFI (disk7s1) <not mounted>: 209.7 MB
Mac 4GB (disk7s2) /Volumes/Mac 4GB: 3.68 GB (1.07 GB free)
Apple Inc. Display iSight
Apple Inc. Display Audio
Apple Inc. Apple LED Cinema Display
OWC      Express USB2 160.04 GB
S.M.A.R.T. Status: Verified
EFI (disk6s1) <not mounted>: 209.7 MB
160GB HD (disk6s2) /Volumes/160GB HD: 159.7 GB (42.54 GB free)
Seagate External 3 TB
S.M.A.R.T. Status: Verified
EFI (disk9s1) <not mounted>: 314.6 MB
3TB Time Machine (disk9s2) /Volumes/3TB Time Machine: 3 TB (3 TB free)
Seagate FA GoFlex Desk 2 TB
S.M.A.R.T. Status: Verified
EFI (disk8s1) <not mounted>: 209.7 MB
FCP (disk8s2) /Volumes/FCP : 2 TB (1.52 TB free)
BUFFALO HD-LBU3
C-Media Electronics Inc.       USB Microphone
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB-PS/2 Optical Mouse
Firewire Information: ?
LaCie 2big triple (button) 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk10s1) <not mounted>: 209.7 MB
FW 1TB (disk10s2) /Volumes/FW 1TB: 999.87 GB (701.87 GB free)
Configuration files: ?
/etc/sysctl.conf - Exists
/etc/hosts - Count: 37
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] at.obdev.nke.LittleSnitch (4212 - SDK 10.8) Support
[not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
[not loaded] net.osx86.kexts.GenericUSBXHCI (1.2.7) Support
[loaded] net.osx86.kexts.NECUSBXHCI (2.2.7) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons: ?
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.bombich.ccc.plist Support
[failed] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.fxfactory.FxFactory.helper.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
[loaded] org.cindori.TEAuth.plist Support
Launch Agents: ?
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ReceiverHelper.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.culater.SIMBL.Agent.plist Support
User Launch Agents: ?
[not loaded] com.digitalrebellion.PreferenceManagerAutoSave.plist Support
[not loaded] com.facebook.videochat.[redacted].plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] com.redgiantsoftware.updater.plist Support
[not loaded] com.Wondershare.TunesGoWatchDemo.plist Support
User Login Items: ?
iTunesHelper
TrimCheck
Avira
Internet Plug-ins: ?
Default Browser: Version: 537 - SDK 10.9
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 4.1.10329.0 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
AdobePDFViewer: Version: 10.1.1 Support
EPPEX Plugin: Version: 3.0.5.0 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ?
ApplyLUTPane Support
CUDA Preferences Support
Flash Player Support
ProCutX Server Support
ArcanaStartupSound Support
WacomTablet Support
Time Machine: ?
Skip System Files: YES - System files not being backed up
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
OSX SSD: Disk size: 476.01 GB Disk used: 339.73 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 3 TB
Total number of backups: 1
Oldest backup: 2014-08-08 12:41:49 +0000
Last backup: 2014-08-08 12:41:49 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 476.01 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      1% WindowServer
      0% fontd
      0% softwareupdated
Top Processes by Memory: ?
590 MB mds_stores
524 MB com.apple.IconServicesAgent
229 MB com.apple.WebKit.WebContent
197 MB softwareupdated
164 MB Safari
Virtual Memory Information: ?
24.40 GB Free RAM
5.09 GB Active RAM
707 MB Inactive RAM
1.79 GB Wired RAM
429 MB Page-ins
0 B Page-outs

Anyone noted Bluetooth connection issues with iPhone 4s and Ford sync?

My wifes iPhone 4 with IOS 5.0.1 auto connects to Ford Sync at least 75% of the time on first attempt. My new iPhone 4S with IOS 5.0.1 takes 4-5 attempts and rarely if ever connects without multiple attempts. Any one else seeing issues with failed Bluetooth connections with iPhone 4S phones?

Look at the right panel for links to other threads concerning problems with Fords. And it's not just Fords, cars in general. No solutions seem to be given.

BB 9930 Bluetooth Pairing Issues with 2011 Prius

I'm having a bluetooth pairing problem with my Blackberry 9930 staying connected to my 2011 Toyota Prius. It pairs fine and then some time later it will dial randomly or disconnect or freeze up. Toyota says it is a common problem with the new Verizon Blackberry phones. Went to the Blackberry forum and there are plenty of posts where the same problem is occuring on a variety of late model autos with the 9930 and no response from RIM.
Is there a patch out there to address this issue?? Is Verizon addressing this issue with RIM??
Thank you,
Richard

I have the same problem with my 2011 GMC Yukon Denali (great truck BTW). I go to make a call and it dials out and connects with the end user but I can't hear them and they can't hear me. I manually turn off the bluetooth connection on my phone wait for the disconnected from Yukon message and then turn it back on. Once I get the connected to Yukon message, I can place the call and it works fine. Then randomly, it'll stop again and I'll go through the same procedure. It's a pain in the neck (or other body parts)!
When will Verizon (RIM) have a fix out for this? I've seen it in quite a few posts on the Internet so this problem seems pretty widespread.
Thanks

Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread.
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

Make/Model: BMW 325I
Year: 2006
Carkit Model info: Latest firmware for the 3-series.
Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
webOS: 1.4.0
Included in compatibilty list: Yes
It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

My iphone has bluetooth connecting issue with my honda crv since upgrading to ios 7.1.2

EVer since i downloaded ios 7.1.2 the bluetooth in my crv keeps sisconnecting and connecting. We took it to a fenius and dud a reinstall. It worked for aday andbow itdoing the same thing. Never had this problem before

What troubleshooting steps have you tried to fix it?. The articles below can provide some step you can try.
iOS: Troubleshooting Bluetooth connections
iOS: Third-party Bluetooth accessories

Bluetooth connection issue with car stereo

Hi,
I have a N8-00, with the current belle software on it.
With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
This is getting very frustrating.
Please help!!

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

Car Bluetooth Connectivity Issue with iPhone 6

Just got the iPhone 6 on Friday -- very exciting! But I can't get the phone to connect to my Mini Countryman's bluetooth. The phone will detect the car's bluetooth signal, and says it's connected, but calls aren't audible via the car stereo system, but rather the phone itself. And if I don't turn the bluetooth off, my car thinks I'm on a call and the radio won't work.
It's frustrating because this feature use to work with my 5s. A friend of mine is having the same issue in his car. And I've seen others complain about this -- seems like an Apple issue. Not sure though.

I did what ever everyone suggested, reset all setting, reset network setting, deleting from car memory. It's works fine after you reset it and reconnect to the car with fresh new connection at first, but after I power the phone off and turn it back on, boom the problem comes back. It's got to be a IOS 8 issue. I did this 3 times and I am getting sick and tired of it so I am going to restore and set up as a new iPhone from Itune and wait and see how Apple is going to fix this issue.
I have 3 cars and the Bluetooth is having the same issue on all of them, work first then no more even with the suggest tricks. I hate my iPhone 6 now.
2011 Lexus ES
2011 Subaru STI
2012 Mercedes E350
Oh I forget to mention, My wife's iPhone 5 with IOS 8 have no issue at all with all 3 of the car. Only my iPhone 6.
Oh I forget to mention, My wife's iPhone 5 with IOS 8 have no issue at all with all 3 of the car. Only my iPhone 6.

Re: Bluetooth Related Issues with Car kits regarding the Palm Pre Post 1.2.1

Make/Model: Nissan Maxima
Year: 2007
Carkit Model info (Manufacturer, firmware version, etc): OEM with Nav
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
Since updating to webOS 1.3.5, the connect and disconnect problems have mostly gone away! Thank you Palm!
One minor complaint still with Bluetooth (if you are listening Palm): The Nissan OEM kit supports up to 4 phones. I paired my wife and kid's phones to the car, including my Pre. When any other family member is in the car with me with their phone (non-Pre), my Pre will not connect to the car. Their phones connect just fine even though my phone has been paired to the car to be the "primary" phone. Only when I am by myself in the car will the Pre Bluetooth connect/disconnect work flawlessly. Thanks again for getting us this far!
webOS version: 1.3.5

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread.
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html
Further information:
Please remove all previous pairing from both devices and carkits before deeming it an "issue." We attempt to diagnose and identify all issues, however some issues are simply resolved by removing pairing from both the device and the carkit and then resetting the connection back up.
It may be important to check back regularly. If it becomes an issue that we would like to diagnose further we may ask for help from the community by contributing log files from the device.
You may receive a PM from me or another Palm employee asking for this information (we can be identified by orange logo's next to the name).
Message Edited by HardBeatZ on 01-19-2010 02:36 PM

IPhone4 having connectivity issues with Infiniti FX

I am able to make and receive calls sometimes. I need to make and receive call all the time. Is anyone out there have the same issues? Lets say I make a call from my car. The phone icon shows up on the screen in my car, but nothing rings or connects and if it does connect it loses connectivity. I have 3 days to figure this thing out before I to return the **bleep** thing.

suewheatt wrote:
I am able to make and receive calls sometimes. I need to make and receive call all the time. Is anyone out there have the same issues? Lets say I make a call from my car. The phone icon shows up on the screen in my car, but nothing rings or connects and if it does connect it loses connectivity. I have 3 days to figure this thing out before I to return the **bleep** thing.
I see that no other forum members have addressed your device connectivity post. For Bluetooth compatibility with your car, please contact your car's manufacturer as they will be able to confirm what Bluetooth devices are compatibility with your car.
For Bluetooth troubleshooting guides please visit the links below:
http://support.apple.com/kb/HT1843
http://support.apple.com/kb/HT1664

Mac Mini Bluetooth Connections Issues with Airport Extreme

Hi,
The issue I'm having is my apple bluetooth devices will not connect to my mac mini. This problem started a few weeks ago and i have narrowed it down to my Airport Extreme which is right next to my Mac Mini. I have tried adjusting the channels and removing the Wide channel option on the Airport Extreme this has helped I can use my magic pad (not really up to par but it works). When I disconnect my Airport all my bluetooth devices work great. Moving my airport extreme isn't an option without a large amount of work putting in a new cable outlet. I don't know what changed from a few weeks ago as the devices have always been within inches of each other and worked fine.
I was trying to find a way to disable the 2.4 band on the airport extreme but this for as far as i know can't be done. I'm running out of ideas on what to do next any help would be great.

Are you sure it's not the monitor? Monitors have been known to do this.
Try changing the broadcast channel on the AEX using the Airport Utility.

SBH80 Bluetooth connectivity issue with Win7

hi,
i am not able to connect my Sony Bluetooth headset SBH-80 with my VAIO laptop with Win7 OS.
Do let me know the solution.

Hi rohankhera，
What is your current situation？
Have you tried the solution as Rick Dee mentioned？
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Bluetooth IOS 5 issues with infiniti

Similar Messages

Maybe you are looking for