Bluetooth iPhone 6 Plus issues with MacBook Pro

Most recently, started having issues with my iPhone 6 plus maintaining connection to my MacBook Pro 15in. Noticed this strictly through using iMessage, as I use it to text a lot.
Steps taken so far:
Verified other bluetooth devices (Keyboards, Mice) working fine.
Rebooted both iPhone and MBP.
"Reset" the bluetooth connection by removing it both on the MBP and iPhone, then re-paried the devices.
The pairing function will work then suddenly it will display "not connected". I additionally have verified the iPhone can connect to other bluetooth devices fine. (Car, Keyboard). So I definitely can say it is isolated to iPhone--MacBookPro.
The fact there was no major updates on any side has me concerned, just suddenly "stopped working".
Any help is appreciated, thanks!

You know what, you are right. Not sure why I thought that. Now the question is why my SMS is not working with iMessage. Back to the drawing board!

Similar Messages

Blue tooth issues with macbook pro late 2011

I purchased the new beats pill and havinng issues with connectivity with macbook pro. My Iphone works well. Any suggestions

I have a similar issue. Have you had any luck with a fix, yet? I have a Samsung sound bar, and my Ipad and Iphone both connect with no issues. The playback is uninterrupted with fine sound quality. My 2011 13" Macbook Pro connects, however playback often sounds like a scratched CD. Last year I called both, Samsung and Apple, and when all was said and done it was recommended that I bring the then brand new sound bar and my Macbook to an Apple Store. Any suggestions I are appreciated.

I hear no sound in FaceTime on iPhone while in conversation with macbook pro

i hear no sound in FaceTime on iPhone while in conversation with macbook pro

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Looks like the problem was on the Macbook Pro. Try ask the person using Macbook Pro turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume).

3GS and Bluetooth pairing/connecting issues with Macbook Pro

I've got a Macbook Pro 15"... Just got my 3GS today... But for the life of me cannot seem to get the 3GS connected to my MBP over Bluetooth... Both the MBP and the 3GS have BT turned on, and both "discoverable"... Done the pairing with the code provided by the MBP, and entered into the 3GS... But that's it... the iPhone shows up in the devices under Bluetooth Preferences, but just can't "connect"... There's a spinning icon on the 3GS in the BT panel... with my MBP showing up, but just sits there, spinning...
What am I doing wrong??

im assuming your on at&t
--if you are trying to use the iphone as a modem for your macbookpro:
currently at&t doesnt support using he iphone for tethering... they say they will later ... no real details about limits and prices but you can bet they will be low and high respectively.
--if you are trying to sync the iphone with itunes over bluetooth:
that profile doesnt exist yet and or itunes doesnt support it yet from what i can find... gonna have to stick with the usb cable... which is faster than bluetooth anyway

IPhone wan't connect with Macbook pro in bluetooth

I Can't conect my iPhone to my Macbook Pro with bluetooth

Have you tried the following:
Pairing another device with your mac and/or iphone?
Maybe the app requires sharing to be turned on for mac?
I would check the app's requirements.. make sure it supports bluetooth versions that you're running.

Issue with MacBook Pro (mid 2009) wifi multiple AP signal 'confusion'

I'll try to explain this as best I can, not being an expert in networking!
I recently upgraded my router from a Linksys WRT160N to an Airport Extreme, in the hope that it would do a better job of broadcasting a stronger wifi signal throughout my house. Whilst it is improved, it's still no good enough for streaming to my iPad 2 where I want in the house. Reading around on the web I discovered that I should be able to use the Linksys as an AP to extend the effective range of my wifi network, as long as it is hardwired into the base station via Ethernet (no WDS support on the Linksys model).
So, I managed to get this all up and running, disabling the dchp on the Linksys, fixed ip allocation etc and using the same SSID and passwords etc. All is well with the iPhone and iPad2 access - they just automatically switch to the strongest signal no problem when I move around the house. Cool.
The issue lies with the MBP - I have a favoured spot in the house where both the broadcast signal from the AEBS and Linksys are very strong, and the MBP gets all confused. opening up the lid from standby it searches for the wifi (bar moving up and down the signal indicator) and then just has an exclamation mark. I try to manually select the SSID but no dice. I have to switch the MBP adaptor off and on, rescan avail networks, and lo and behold two versions of my SSID are shown. Select one and then it connects. However, I have to go through this whole exercise every time I pull the MBP out of standby, which is very irritating.
I do have a workaround - if I name the SSID on the Linksys something different, the problem goes away. However, i effecktively now have 2 wireless networks & I then have to manually switch between the two SSID's to get the strongest signal depending where I am in the house. It's suffices for now but not ideal.
What I don't get is why is it only the MBP affected & the iPhone & iPad 2 are fine? Is this anything to do with the 2.4 ghz & 5 ghz being broadcast by the AEBS getting all mixed up with just the 2.4 ghz being broadcast from the Linksys??? Both 2.4 & 5 ghz are broadcasting the same SSID.
Any help appreciated.

OK - fixed this now. By setting the 5 Ghz channel on the AEBS to a different SSID and putting this to the top of my priority WIFI connections on the MacBook Pro then it ignores the conflict between the 2.4 Ghz networks being broadcast by the Linksys & AEBS. No more hanging connection when I resume the MBP

IPhone 4 not synching with MacBook Pro contacts or calendar

Hi there,
My issue is that my iPhone 4 is not synching with my MacBook Pro which is running Snow Leopard (I haven't upgraded to Mountain Lion yet as judging by the reviews there's a split in how successful it is).
The latest information is on my iPhone, both contacts and calendar, however under iTunes (the latest update v11) it does not give me the option box to 'check' and sync these menu's. Any ideas anyone - this is issue is not only baffling but annoying as ****.
Any ideas of feedback would be greatl

Doh! Got it working....
Helps to use the "search" function better. I read another thread where someone was having the same problem and a suggestion was to ensure that he was using the same cable that came with his iPhone...sure enough! That was my problem. My wife has an iPod and somehow we mixed up our wires.
I swapped cables with her and boom! The synch function is back at work.

Hard core lefty has major issues with MacBook pro trackpad

I'm a really hardcore lefthanded person. Like everyone I've been getting all the hype about the Magic Trackpad, which is just a standalone version of the trackpad on my MacBook, on the iPhone, iTouch, etc. I touchpad mouse with my left hand.
When I got the machine, I turned OFF all the bells and whistles swipes, etc. of the touchpad except the right click option because all it did was ruin my productivity. I could find nowhere to reverse the strokes to accommodate lefthanded use. Am:
1)I'm dim and don't know where to look for the change or what magic words to enter into the computer help.
2)It's not possible.
3)Apple doesn't care about creative lefty types anymore.
I hope someone at Apple is listening, because as a 20+ year PC user, (touchpads for 10 years) I absolutely love everything else about the MacBook Pro...
HELP!

Take a look at Better Touch Tool - VersionTracker or MacUpdate - which enables you to make customizable gestures.
Being a rightie I'm not sure I quite understand the issue. The 'right-click' function can be set to either the right or left corner. The other gestures don't seem to have any sort of 'handed' peculiarities, but then I've never tried them with my left hand.

EXTERNAL HARD DRIVE ISSUES WITH MACBOOK PRO 13"

My new macbook pro 13" is unable to read my new Toshiba Canvio 3.0 plus 1 TB hard drive. I have the new OS Lion that came with the computer. The computer is up to date. I am not sure what is causing this issue. Is this problem caused by a software issues or is my new Macbook deffective. Please some one help me or give me some advice. I am thinking about turning my MacBook in for a new one.
Clem

Did you format the external drive for use with OS X?
Open Disk Utility. Does Disk utility see the connected drive?
Format it to "Mac OS Extended (Journaled).

Bluetooth headphones don't work with Macbook pro Retina, but they do with iMac. Why???

I AM NOT AN EXPERT. I AM MAKING ASSUMPTIONS. My issue, tech spec's and assumptions are listed below.
MY ISSUE:
My Rocketfish headphones work perfectly with my iMac but not with my Macbook Pro Retina.
The Macbook Pro does recognize the device but when I try to connect, it gives me the following error message:
"The device does not have the necessary services".
TECH SPEC
iMac has OS X 10.7.5
Macbook Pro Retina has OS X 10.8.2
MY ASSUMPTION
If I upgrade to 10.8.2 I will not be able to use the headphones.
Or
The new Macbook Pro's are only functional with bluetooth headphones that have certain specs.
HEADPHONES LINK - http://www.rocketfishproducts.com/products/mobile-phones-gps/RF-MAB2.html
HELP PLEASE
samgimages

I have the same problem when I try to connect to my Pioneer Bluetooth car stereo. I dont get any sound before the error message occurs.
I notice that the Type field of the connection is "handsfree"
Malcolm

Issue with MacBook Pro charger?

Hello,
I bought my MacBook Pro 15" in October 2009. I hardly ever take it out of my place. Senior Apple adviser told me, that the battery in my computer is factory calibrated, so bassically I treat my laptop as iMac. It's connected to the charger all the time. When I'm done using it, I either put it to sleep or shut it down. Two days ago I noticed: (Not Charging) by the icon of the battery. Apparently the charger stopped charging. It's MagSafe charger with T style connector. From what I've been reading in disscussion forum regarding charger issues, it looks like perhaps this charger needs to be replaced.
But the interesting part is, that the green led on the connector holds steady since (Not Charging) appeared two days ago, and also, the battery power dropped only to 94% and holds steady as well.
So this makes me wonder, is there something wrong with the charger, or is it something else?
My computer knowhow is limited, so any information or tip will be appreciated.
Thanks

http://support.apple.com/kb/TS1713
You can try resetting the SMC http://support.apple.com/kb/ht3964

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Resolution issue with macbook pro 13 (late 2013) and dell u2711

I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
Last week we got a MacBook Pro 13in, late 2013 model.
If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
I have zapped the pram, powered down the display etc etc etc and it made no difference.
I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
TIA.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Networking issues with MacBook Pro

I have tried to find this issue on line and in the forums and couldn't I have seen many people have similar issues using VPN connections or Citrix but nothing what I am seeing. I have 3 MacBook Pros that connect fine to our company network. They have the DNS settings from our DHCP server and I can see their leases and everything. We can connect to network drives however we can't connect any of them to the company's intranet sites. If we type in http://companysite and hit enter both Safari and Firefox come back stating that they can't find the server companysite. Not sure why it is looking for a server by the name of companysite when our DNS servers point to the servers that are hosting the sites.
If I type in the IP address of any company site then it works however using the name doesn't. So it sounds like an issue with DNS but again the DNS servers are in the network settings and Windows machines have no issues with using the http://companysite instead of using http://IP Address. Any assistance would be appreciated.

OK, figured out that if I added my company's domain to the search domain list in Network Settings this would allow the MacBook to use http://companysite instead of the IP Address. However now I need to figure out the authentication issue. We use the end user's network credentials for access to the company intranet sites. Using http://companysite I get access denied. Using the IP address allows the end user to enter in their network credentials.

Sleep Issues with Macbook Pro

Hi all,
When I wake my laptop (15" Spring 2011 Macbook Pro) while it's connected to a power source, I see the screen for a split second before it goes black. Nothing I do will make the screen come back until I disconnect the power source, at which point the screen gets bright again.
However, what's interesting is that while the screen is black, the computer still gets input from the keyboard because I can see things that I've typed in the password field.
Is there any way to fix this?
Thanks in advance!

Reset SMC.
Many power related issues can be resolved by resetting SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Bluetooth iPhone 6 Plus issues with MacBook Pro

Similar Messages

Maybe you are looking for