Bluetooth is not ready after waking from sleep on Windows 7

After upgrading my Tecra M10 from Windows Vista x64 Enterprise to Windows 7 x64 Enterprise, sometimes, when I wake the laptop from sleep, Bluetooth is not ready.
Hibernating doesn't solve the problem, it needs a reboot which is a problem for me beacuse I usually have lots of applications open.
When this happens, the only Bluetooth devices on Device Manager are:
* Bluetooth RFCOMM
* Bluetooth USB Controller-5 from TOSHIBA
When all is working well, the Bluetooth devices on Device Manager are:
* Bluetooth RFBUS
* Bluetooth RFCOMM
* Bluetooth RFHID
* Bluetooth USB Controller-5 from TOSHIBA
How can I restart Bluetooth without having to restart the whole system? Turning wireless communications on and off on the side silder doesn't work.
Thanks,
Paulo Morgado

Hi,
I have a *two week old X500-10T* From day one I have had a number of issues, working with the Toshiba Technical support I have had to disable hibernation for mains power and battery use. My screen went to sleep and just could not wake it up without doing a reset procedure including the removal of the battery etc.
I have been told to look out for another updated BIOS that should solve this issue. I already have a later BIOS on my laptop than the ones the Toshiba Tec support have.
Having sorted that (not really) I also have an issue with my Bluetooth and mouse. It seems to work till you leave it for about two hours, then the icon in the task bar goes ??RED?? and you can??t in any way get it to connect again. By doing a reboot it mostly comes back into action but not always. I have to fiddle about with switching on and off from the Bluetooth manager till it comes back to life.
Again with the great support from the Toshiba Technical support (TTS) we tried almost everything, loading the latest stack, going back to a restore point before the installation of the Windows update etc etc, but nothing solved the issue.
Again TTS suggested I keep an eye out for a BIOS update. My previous Toshiba has worked well for many years and I am sure Toshiba will eventually come up with the cause. Very disappointing, but I am keeping my fingers crossed for a satisfactory solution (shortly I hope)
I hope this helps some other X500-10 users.

Similar Messages

  • Tecra R840 do not shutdown after waking from sleep (USB, BT is not working)

    Hello,
    I've a problem with my R840 running win7pro + SSD.
    After waking it from sleep:
    - no USB activity (but there is power in the ports since I can see the leds on in the external HDD or mouse)
    - my Bluetooth mouse stops working
    - my internet connection will work after 1 or 2 minutes of waiting
    - and...the laptop will not shutdown unless I press the physical on/off button for 5 secs or so!!!
    In device manager everything seems ok! The Power management in all the devices/USB hubs etc are set to not turn off the devices to save power!
    Already clean booted the laptop several times and the problem remains!
    Everything is just fine if the laptop do not sleep!
    But I put it in a sleep mode and the I wake it I have all those problems!
    Any sugestions?
    Best Regards,
    paulo

    >But I have the SSD for almost 2 years or so and it worked without this issue for a long time!
    >This appeared (or at least I detected it) suddenly.
    Hi Paulo this would mean that there is nothing wrong with the BIOS because as you said above: the unit worked properly in the past.
    I guess the system is muddled up and does not work properly after waking up from sleep mode:
    Possible solution -> the system should be reinstalled. In case youve got the Toshiba recovery medium, such OS installation / recover process would be very easy and does not take very long

  • Airport not Reconnecting after waking from sleep

    Hi all,
    I have a problem with Airport not automatically reconnecting after the computer wakes from sleep or is turned on or rebooted. I have it set to join a specific network automatically. Any idea why this may be? It used to work just fine.

    I had this problem just recently and seem to have fixed it today. I made the following changes:
    I changed security from WPA2 to WPA using the Airport Admin Utility.
    I went to the Network Preferences panel and found that the network was still listed as WPA2, so I deleted it.
    I then added the WPA network to my preferred network list.
    The computer now reconnects automatically after sleep or shutdown.
    I don't know whether changing from WPA2 to WPA was necessary. It may be that all you need to do is delete and re-add the network.
    Hope that helps!

  • Keyboard/mouse do not function after waking from sleep?

    Hi, I've recently noticed that when ever I wake my MacBook from sleep mode, the keyboard and mouse do not respond to any input. It does not occur every time, but the majority. If I close the display a few more times and wake it again it can sometimes work but obviously this is time consuming.
    Has anyone else encountered this or know of a solution?
    Thanks in advance

    Well I just bought my iMac few days ago, the Apple propaganda is all that their products are so much better and blablablabla, basically sales talk.
    Anyway, I was stupid enough to buy one and now I'm feeling the "real Mac expirience", keyboard and mouse have a lot of "wireless" connection issues but what real ****** me of is the fact that if my keyboard does not connect I have to shut the iMac on the on/off button, which i supose is not very good for the Mac's health, but well this is the leasson.
    Resuming I have the same problem as the one reported here, and worse than the problem is seeing Apple's "support" on this subject, which is nule, this worries me even more.
    Back to crap computers that at least work out.

  • Fingerprint Reader not working upon waking from sleep for windows login

    Hello,
    I have a brand new T540P with a Validity fingerprint reader. 
    Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows.
    Things I have tried
    -uninstalling/installing device in device manager and finger print manager pro software
    -setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options
    -disabling "allow windows to turn off this device to save power" in device manager.
    I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue.
    Is this a platform wide issue affecting all T540P models? This is frusterating. 
    Solved!
    Go to Solution.

    sailoholic
    Your report is the first we have ever heard of this issue on T/W.  It does not happen on my T/W systems here (with or without 30 Day Standby enabled).  The other reports I heard of this problem came from X240.
    I just want to confirm with you - the problem happens after coming out of Sleep (and not Hibernate), right?
    Can you tell me exactly what you are doing?  e.g.
    1.  Use the computer normally (is AC attached or not?)
    2.  Close the lid - the computer goes to sleep  (or do you go to sleep some other way?)
    3.  Open the lid 2 hours later (or how long)?
    4.  are you using a dock?
    The more info you can provide, the better.  Thanks for your help.
    Also please let me know what BIOS version you have.

  • Mutiple monitor setup not working after waking from sleep

    Mac Mini 2011
    Mavericks (10.9.3)
    Monitor 1 Mini->HDMI Cable->Monitor
    Monitor 2 Mini->Mini Display Port to HDMI Adapter->HDMI Cable->Monitor
    Monitors are not the same size
    Thw adapter is PNY (PNY A-DM-HD-W01)
    Upgraded to Mavericks, second monitor works nicely. However, when waking the system up after it goes to sleep, the second monitor does not turn on. Further, the primary montior blinks every few seconds between the usual display and shrinking the windows to a smaller size. Unplugging the second monitor from the HDMI adapter cable stops the blinking, but connecting it again (even after waiting a few minutes) makes the blinking continue and the second monitor does not wake up. On reboot, all works fine again.

    Hello chacham,
    The article linked below provides some useful troubleshooting steps that can help resolve the issues you're experiencing with your display.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Allen

  • External keyboard and mouse not recognized after waking from sleep

    This started happening all of a sudden. It was working fine before that. When I disconnect the power cable, keyboard, and then connect them back, its not recognized. To make it recognize the keyboard and mouse, I have to logout and login or restart the laptop. I looked at this related post, but the PRAM reset fix did not work for me : http://forums.macrumors.com/showthread.php?t=870482
    Any idea how to fix it?
    OS version: 10.9.2
    MacBook Pro 13-inch Mid 2012
    Processor 2.9 GHz Intrel Core i7
    Memory 16GB 1600 MHz DDR3

    I have a similar problem on our G3 iBook with Panther. Most of the keys don't work, and of the four or five that do, they print only gibberish.
    For a while I had control of the "C" key, and I was able to start from the Installation CD-ROM. I ran Disk Utility. It found and repaired a whole bunch of permissions and reported no problem with the hard disk. But I still cannot use the keys, and since then I've lost the use of the "C" also.
    Because I cannot use the keyboard, I cannot type in my administrator's password, and for that reason I cannot use System Preferences to start from the Installation CD-ROM. I did not see the Hardware Test on the CD-ROM, but it sounds interesting.
    Any ideas on how to get back to the CD-ROM when my keyboard doesn't work?

  • Network connection after waking from sleep

    Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
    FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)

    I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
    http://docs.info.apple.com/article.html?artnum=304482

  • BSOD after waking from sleep On XP and Vista

    Hello my name is Santiago. I have started getting BSODs after using sleep lately. I get BSODs after waking from sleep on windows Vista. I upgraded to that recently, and that is when the problem started. It was working fine for a few days then it just bluescreened, I have switched back to XP and see if it was with only vista. but it was not I do not know what to do any more. may any one please help me?
    This is what the blue screen says
    http://pwimage.org/images/l9ix40o7yfyfhjwd63i6.jpg
    the model is a T60 think pad.
    Message Edited by spena09916 on 11-21-2008 01:35 PM

    Hello Santiago,
    the link doesn't work anymore...
    So i'm just guessing:
    • did you check your memory? Might be a failure in a module.
    • you should update youre drivers. Use the system update tool.
    • did you try a recovery or new installation of your system? if the BSOD still occurs, there really might be a hardware failure... do you still have warranty?
    Cya
    Omar

  • Display will not sleep any more after waking from sleep

    My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
    In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
    I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
    I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
    Any suggestions? Anyone else ever see this? Seeing it now?
    Thanks!

    This is still an issue for me.
    I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
    Sometimes a reboot fixes it, sometimes I have to reset the SMC.
    Any info out there?

  • On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this?

    On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this? Thanks --

    Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

  • Kernal panics after waking from sleep on MBP

    I have a client machine that continues to crash after waking from sleep.  Most of the logs indicate its a USB driver issue but not all of them which make me question whether it is truly a USB issue.
    Here is the first log:
    Interval Since Last Panic Report:  42291 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    4D739B74-806B-4EE5-B643-3ABC69B99DB3
    Mon Jan 21 14:40:59 2013
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c6e1f, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff806a45a628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0xffffff806a5541f8, RBX: 0xffffff806a554000, RCX: 0x0000000000826f90, RDX: 0x0000000000000000
    RSP: 0xffffff807e493bc0, RBP: 0xffffff807e493ca0, RSI: 0x000000807e878986, RDI: 0xffffff807e493c39
    R8:  0x000000000000001f, R9:  0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff800a69e600
    R12: 0xffffff806a458000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff807e493bc0
    RFL: 0x0000000000010286, RIP: 0xffffff7f816c6e1f, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff806a45a628, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807e493870 : 0xffffff8000220792
    0xffffff807e4938f0 : 0xffffff80002c4794
    0xffffff807e493aa0 : 0xffffff80002da55d
    0xffffff807e493ac0 : 0xffffff7f816c6e1f
    0xffffff807e493ca0 : 0xffffff7f816e3c05
    0xffffff807e493ce0 : 0xffffff7f816c5257
    0xffffff807e493d10 : 0xffffff7f80c9a832
    0xffffff807e493d50 : 0xffffff7f8174d4f0
    0xffffff807e493da0 : 0xffffff7f8174f692
    0xffffff807e493de0 : 0xffffff7f8174f7c4
    0xffffff807e493e20 : 0xffffff7f80c9e4c5
    0xffffff807e493e60 : 0xffffff7f80c9e628
    0xffffff807e493e90 : 0xffffff7f80ca1fd7
    0xffffff807e493ef0 : 0xffffff800063d4d6
    0xffffff807e493f30 : 0xffffff800063c250
    0xffffff807e493f70 : 0xffffff800063c0f4
    0xffffff807e493fb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
             com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 42049368948948
    last loaded kext at 16300805887472: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f80795000, size 16384)
    last unloaded kext at 16406017984235: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f80795000, size 12288)
    loaded kexts:
    com.lightspeedsystems.kext.LsSaKernel64          2.0.0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleIntelHD4000Graphics          7.3.2
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelFramebufferCapri          7.3.2
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBXHCI          1.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    System Profile:
    Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x14100000 / 4
    Second log---------------------------------------------------------------------------- -----------------------------------
    Interval Since Last Panic Report:  18613 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    4D739B74-806B-4EE5-B643-3ABC69B99DB3
    Wed Jan 30 13:21:54 2013
    panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816d61f1, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x000000012562c000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0x480001eabd058d48, RBX: 0xffffff806a6af000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff807ef03b60, RBP: 0xffffff807ef03b70, RSI: 0x000000000000012c, RDI: 0xffffff806a6af000
    R8:  0x000000000000001f, R9:  0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff80002dad00
    R12: 0xffffff806a6af000, R13: 0x0000000000000000, R14: 0xffffff806a6af000, R15: 0xffffff807ef03bc0
    RFL: 0x0000000000010282, RIP: 0xffffff7f816d61f1, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x000000012562c000, Error code: 0x0000000000000000, Faulting CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff807ef03810 : 0xffffff8000220792
    0xffffff807ef03890 : 0xffffff80002c4794
    0xffffff807ef03a40 : 0xffffff80002da55d
    0xffffff807ef03a60 : 0xffffff7f816d61f1
    0xffffff807ef03b70 : 0xffffff7f816d7413
    0xffffff807ef03bb0 : 0xffffff7f816c6e31
    0xffffff807ef03ca0 : 0xffffff7f816e3c05
    0xffffff807ef03ce0 : 0xffffff7f816c5257
    0xffffff807ef03d10 : 0xffffff7f80c9a832
    0xffffff807ef03d50 : 0xffffff7f8174d4f0
    0xffffff807ef03da0 : 0xffffff7f8174f692
    0xffffff807ef03de0 : 0xffffff7f8174f7c4
    0xffffff807ef03e20 : 0xffffff7f80c9e4c5
    0xffffff807ef03e60 : 0xffffff7f80c9e628
    0xffffff807ef03e90 : 0xffffff7f80ca1fd7
    0xffffff807ef03ef0 : 0xffffff800063d4d6
    0xffffff807ef03f30 : 0xffffff800063c250
    0xffffff807ef03f70 : 0xffffff800063c0f4
    0xffffff807ef03fb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
             com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
             com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 18633492210750
    last loaded kext at 37211407179: com.lightspeedsystems.kext.LsSaKernel64          2.0.0 (addr 0xffffff7f810cc000, size 147456)
    last unloaded kext at 198602469343: com.apple.driver.AppleUSBTCKeyEventDriver          227.6 (addr 0xffffff7f814fc000, size 8192)
    loaded kexts:
    com.lightspeedsystems.kext.LsSaKernel64          2.0.0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleIntelHD4000Graphics          7.3.2
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelFramebufferCapri          7.3.2
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBXHCI          1.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    System Profile:
    Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x14200000 / 1
    Sorry for the huge post.  The lightspeed kext shouldn't be causing problem as we use this program for all mac machines, I also did extensive troubleshooting with it.  I did ask her to stop using the logitech USB device but she said it didn't make a difference, it was a plug and play device, would it still cause this issue without having it plugged in?
    Thanks in advance for the help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • After upgrading to Tiger, freeze after waking from sleep on PM G4

    My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
    So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
    When I installed Tiger, I used the 'archive' option.
    My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
    When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
    I also see an error in the system.log which may reveal what is going on:
    Nov 20 18:54:40 localhost kernel[0]: standard
    timeslicing quantum is 10000 us
    Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
    2005 11: 46:54)[44]: starting
    Nov 20 18:54:40 localhost kernel[0]:
    vmpagebootstrap: 284852 free pages
    Nov 20 18:54:40 localhost kernel[0]:
    migtable_maxdispl = 70
    Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
    modules
    Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
    1982, 1986, 1989, 1991, 1993
    Nov 20 18:54:40 localhost kernel[0]: The Regents of
    the University of California. All rights reserved.
    Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
    headers and 2949 cluster IO buffer headers
    Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
    9 already taken
    Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
    AppleUSBOHCI[0x2057000]::start OHCI controller will be
    unloaded across sleep
    Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
    TI ID 8019 built-in now active, GUID 000a27ff
    feb38fe6; max speed s400.
    Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
    VendorID 1033 ID cd PCI now active, GUID 0000303c
    0008c32e; max speed s400.
    Nov 20 18:54:40 localhost kernel[0]: Security auditing
    service present
    Nov 20 18:54:40 localhost kernel[0]: BSM auditing
    present
    Nov 20 18:54:40 localhost kernel[0]: disabled
    Nov 20 18:54:40 localhost kernel[0]: rooting via
    boot-uuid from /chosen:
    474ACE52-2523-3EE7-9C54-DDC3734C7922
    Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
    ID="0"><key>IOProviderClass</key><string
    ID="1">IOResources</string><key>IOResourceMatch</key><string
    ID="2">boot-uuid-media</string></dict>
    Nov 20 18:54:40 localhost kernel[0]: Got boot device =
    IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
    Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
    Nov 20 18:54:40 localhost kernel[0]: BSD root:
    disk0s10, major 14, minor 10
    Nov 20 18:54:40 localhost kernel[0]: jnl:
    replay_journal: from: 2668032 to: 12288 (joffset
    0xe04000)
    Nov 20 18:54:40 localhost kernel[0]: Jettisoning
    kernel linker.
    Nov 20 18:54:40 localhost kernel[0]: Resetting
    IOCatalogue.
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 2
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
    loaded and registered.
    Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
    version: 4001000
    Nov 20 18:54:40 localhost kernel[0]: raw version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
    2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
    version: 4001000
    Nov 20 18:54:40 localhost kernel[0]: raw version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
    2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
    filtering initialized, default to accept, logging
    disabled
    Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
    Ethernet address 00:0a:27:b3:8f:e6
    Nov 20 18:54:41 localhost launchd: Server 292f in
    bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
    abnormally: Hangup
    Nov 20 18:54:41 localhost lookupd[56]: lookupd
    (version 365) starting - Sun Nov 20 18:54:41 2005
    Nov 20 18:54:41 localhost diskarbitrationd[36]:
    disk0s10 hfs
    474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
    Nov 20 18:54:41 localhost kernel[0]: jnl:
    replay_journal: from: 1374208 to: 1564160 (joffset
    0x624000)
    Nov 20 18:54:41 localhost diskarbitrationd[36]:
    disk1s10 hfs
    947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
    /Volumes/Backup
    Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
    [98000000:08000000]
    Nov 20 18:54:43 localhost
    /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
    Login Window Application Started
    Nov 20 18:54:43 localhost loginwindow[72]: Login
    Window Started Security Agent
    Nov 20 18:54:44 localhost mDNSResponder: Adding browse
    domain local.
    Nov 20 18:54:45 localhost kernel[0]:
    UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
    Full Duplex
    Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
    setting hostname to "Jason-Radtkes-Computer.local"
    Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
    executing
    /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
    Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
    posting notification
    com.apple.system.config.network_change
    Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
    lookupd (version 365) starting - Sun Nov 20 18:54:47
    2005
    Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
    target=enable-network: disabled
    I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
    I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
    I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
    Thanks in advance for your help.

    Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
    Ron

  • Ethernet slow to connect after waking from sleep

    Since installing Lion (and updating to 10.7.1) on my 2008 24" iMac I have noticed that after waking from sleep the internet connection takes about 10 seconds to restore. I have reset the SMC and PRAM and performed a safe boot (in case this helped) but to no avail. The slow conenction can be observed if after waking from sleep the Network System Preference is clicked and the ethernet status "light" is red, changes briefly to amber and then green indcating a connection. The iMac is connected via an ethernet cable to a Linksys 802.11n 4 port wireless router.
    I also have a 2010 13" MacBook Pro, with the same OS, and version, conencted in the same way to the same Linksys router and it does not exhibit this problem.
    This slow internet connection access after waking from sleep is an annoyance and I'd appreciate any input on how to elimnate it.
    Thanks to those wiser than I, who might read this note.

    SOLUTION FOUND!
    I've found a list of possible solutions here's the link:
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    I solved my problem moving the Ethernet and WiFi adapters in the top of the list and Bluetooth at the end.
    Move Wi-Fi to the top of the Service Order list – This is an old tip that simply prioritizes WiFi as the primary method that your Mac should connect to the internet, and it seems to help maintain connections

  • Multiple BSOD after waking from sleep.

    Edit: Issue traced to a bad stick of ram. Thanks you for your time!
    Recently installed Windows 8.1.  No problems. Put computer to sleep a few times instead of shutting down. No problems. Today, after waking from sleep, it opens to the sign in page instead of desktop like normal.  Start up an application, two seconds
    later, BSOD.  Restart, don't touch anything, within two minutes, BSOD.  And so on. Struggle to download latest windows updates, BSOD. Updates start installing after a BSOD.  Restarts at least five times while installing, which I found to be
    strange.  Dumps and msinfo through link.  Since the updates went through, no problem (for the last ten minutes while I put this together).  I thought I should share though.
    http://1drv.ms/O1SDXd
    Hardware:
    Gigabyte LGA 1150 Intel Z87 HDMI SATA 6Gbps USB 3.0 ATX DDR3 1600 Intel Motherboards GA-Z87-HD3
    Intel Core i5-4670K
    CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRACorsair Builder Series CX 600 Watt ATX/EPS  80 PLUS (CX600)
    SAPPHIRE Vapor-X Radeon HD 4870 1GB 256-Bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card
    Samsung Electronics 840 EVO-Series 120GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE120BW

    These crashes were related to memory corruption (probably caused by a driver). 
    Please run this test to find which driver is causing the problem.  
    If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
    know what it is you probably are not overclocking.
    Driver verifier (for complete directions see our wiki here)
    Co-Authored by  JMH3143
    Wanikiya and Dyami--Team Zigzag

Maybe you are looking for