Bluetooth is not working after 4.3 update in zr

After i updated my xperia zr to 4.3 the bluetooth is not working, it wont shows any blutooth devices and acnt able to pair.pls give me the solution immediatlly

I do not know,you need to contact sony:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Bluetooth volume not working after last firmware update

After the latest firmware update I'm not able to adjust the volume. Both when i use the volume rockers on the side, or try it via settings, the indicator shows changeing volume - but there are no difference. VERY ANOYING!
any solution planned for att this issue?
Edit; just notice that the bluetooth volume is working on headset but not on devices with only media playback. (Working with SBH20 but not with AV-receiver or bluetooth speaker)

I can confirm that my Z2 bluetooth volume control stops working when i use it with my logitech bluetooth speaker.
Bluetooth volume control does not work when I use Spotify, TuneIn Radio Pro, SoundCloud or Walkman. However the seemingly same bluetooth volume control works when I use Poweramp.
At first I tought that the problem was related to streaming music but since the Walkman bt sound volume does not work on local media files it is not the case.
The bluetooth volume control works with my Nexus 7 and Lumia 1020.
Does anyone have heard from Sony regarding this issue?

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Bluetooth doesn't work after E90 firmware update!

Nokia staff - help needed!
Bluetooth has stopped working after E90 firmware update.
The following on-screen message is shown: "Unable to perform Bluetooth operation!"
P.S. Reinstalling firmware via Nokia software update doesn't help at all. If connectivity problem still can be solved with USB cable, the worst tning is that I can't use my phone's BT handsfree when driving.

Hi hanzzi
No information as to what device you are using, but try deleting E:\CITIES + .qf file from memory card then restart OVI Maps application to re-define folder structure required to download regional mapping using OVI Suite.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

HT6154 rear camera on iphone 5 not working after ios 8 update why?

My iPhone 5 rear camera is no longer working after ios 8 update its just black I can see the flash choice the hdr and the timer but other than that it is a black screen

Hi there fjci2003,
You may find the troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

Audi Bluetooth does NOT Work After Update 8.02 and neither my car charger

aAfter Update iOS 8.02 Bluetooth. Audi does NOT Work - Connection is ok bit cant talk with Connection
and also The car charter does NOT work

Hi Lars - I had the same issue - found the help on audi-sport.net - link:
http://www.audi-sport.net/xf/threads/iphone-6-not-functioning-correctly-when-con nect-to-mmi.227675/
see page 2 of the postings under veeeight's suggestion (7 steps). Pasted from the forum.
1. Rename your new iPhone
2. Delete all Bluetooth phone pairings from the Audi MMI
3. Reset All Settings
4. Reset Network Settings
5. Reset Network Settings again
6. Connect to WiFi on your phone (optional)
7. Do the pairing with the car again.
I was able to resolve this on my 2011 A4 with MMI. That's after I have updated my iPhone 6 with 8.0.2
Hope this helps you and anyone else having the same issues.

Bluetooth keyboard not working after 10.7.2 update

Just got around to installing the 10.7.2 update this morning, and afterwards could not connect my Apple bluetooth keyboard. I've also had some difficulty with my Apple mightymouse (yes, it's old, but I love it). I tried restarting with the keyboard and mouse off and trying to re-connect using the Bluetooth preferences, both SMC reset and PRAM reset, repairing disk permissions, and all of the suggestions on this thread: https://discussions.apple.com/message/16377827#16377827
So far nothing has worked. My mouse began working again after the initial restart with both bluetooth devices off, but the keyboard isn't being detected in either the Keyboard setup or the Bluetooth setup assistance. The keyboard, however, was detected by my iPad, and was working with this computer before the update. I've made sure that the bluetooth on my iPad is off so as not to confuse it, and it's still not working.

Well, I found a solution. After removing the bluetooth preferences as directed in this article (which didn't help me, but might somoeone else): http://ismashphone.com/2011/08/how-to-fix-bluetooth-pairing-in-mac-os-x-lion-iss ues.html
There was a software update that fixed this. Thank goodness. So if like me you're just getting around to doing the update, after the big 10.7.2 one, check software update again. I assumed it would be all rolled in to the same update, but that was not the case.

Bluetooth keyboard not working after sleep *windows8* FIX

Its pretty simple actually. It might not work for you, but let me know if it does. Untill bootcamp drivers are updated, I found that disabling the Bluetooth Network adater under Networking And Sharing in the control panel will allow my Keyboard to function again after waking up. If you find that your keyboard is still paired, but not responding when your Windows 8 install wakes up after sleep, this might fix the problem for now.
If you have a notebook, I read on another forum that if you enable Bluetooth Collaboration under the device settings in Device Manager, you can fix this issue also. Google for it if your interested.

I've noticed on mine that if it is coming out of Ssafe Sleep (you can see the progress bar at the bottom of the screen if it is) then the keyboard does take a bit to active.
This may not be your problem however just be sure you've been patient enough after waking.

VN7-791G bluetooth devices not working after Windows 10 upgrade

After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7. All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated 21/6/2006). Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10. I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck. I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom. The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.

Yay! Success at last! Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting. This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.

My Verizon app not working after iOS 7 update

I have an iphone 4s. After I upgraded to ios 7, the my verizon app stopped working. Today, the app got an update in the app store to version 3.6.0. I installed the update, but it still does not work. When I run it, it spins the circle dots for a while and comes back with "Error: A communication error has occured [sic]. Please ensure Internet connection and try again." And it has a "Reload App" button, which I press, and it does the same thing. This happens whether I'm on wifi or 3g. Several times I've tried rebooting the phone, deleting and reinstalling the my verizon app, but it still doesn't work. Does anyone else have this problem? How did you solve it? Thanks.

I did the network reset, but that didn't help. FYI if you're thinking of resetting network settings, the only negative side-effect is that the phone forgets all of its wifi networks.
I did a restore from backup via iTunes, and that didn't help either.
I've had a couple other issues with iOS 7, and what I did was reset the firmware via iTunes but I didn't restore from backup. Now My Verizon works. The reason I did this drastic step was because my Safari was messed up in iOS 7 in another way, and restoring from backup didn't help that either, but I had a hunch that getting Safari fixed would fix My Verizon. (I can't know for sure if I was right about that.)
Here's the thing: Apps like My Verizon that really just load web pages use Safari's settings for the web. So I would try this if I were still stuck with My Verizon not working: Go into Safari settings, and clear cookies and history and cache data, and make sure the "Block Cookies" setting is set to either "Never" or "From third parties and advertisers." Then reboot your phone for good measure, and try My Verizon again.

Bluetooth is not working after 4.3 update in zr

Similar Messages

Maybe you are looking for