Bluetooth Issues after 3.1 Update

iPhone 3G worked flawlessly with 2 devices prior to update:
1 - Pioneer FH-P8000BT - 3 issues
(a) Callers now hear echo of themselves.
(b) Pairing connection goes away
(c) Call quality is worse
2 - Jabra Halo Headphones
(a) Bluetooth connection is horrible outdoors, fine indoors. Music cuts out continuously outdoors. Can't have iPhone in any pocket unless the pocket happens to be 2 inches from the headphones.

same issue here...update to 3.1.2 was no help...company I bought my Pioneer from said many customers are complaining about the same thing...no solutions that I am aware of...

Similar Messages

Has anyone experienced bluetooth problem after iPhone 4 update?

Has anyone experienced bluetooth connecting problems in car after iPhone update for 4.

Hi Barosz2,
If you are having Bluetooth connection issues after a recent update to your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Bluetooth problems after Lumia Black update

Just updated my 1020 with the Black update. Now i cant listen to music on my bluetooth headphones. The headset is connected ok (and constantly), the connection doesnt drop. But i only get about a second of music, then 2-5 seconds of silence, then another short burst etc.
Ive tried deleting the headset in bluetooth settings and re-pairing but that did not help. If i just listen through the phone speaker, then there are no dropouts. Headset is fully charged.
Anyone else having issues since the update? Been working fine for over a month before the update.

Ok, managed to fix this now, these are the steps i did though you might not need all of them
Did a soft reset (hold power and volume keys)
Tried going to xbox music, had no download options, couldnt play any music even locally as said i had no license.
Noticed the time and date was wrong after the reset so set that to be correct.
XBox music now works again
Bluetooth headphones now work again.
So perhaps the root cause of the problem was that after the black update, the DRM on the xbox music files was kicking in and once the licencing was working again, all was fine.
Anyway, phew.

Distiller 9 issue after a new update to Adobe Acrobat Pro (version 9.3)

After installing the update, I was asked to reboot my HP Pavilion dv9617nr Notebook Computer (Windows Vista Home Edition). After the reboot, I was given an error message which explained that the ICC Color profiles in Adobe Distiller 9 could not be found and that I should reinstall my Adobe Acrobat 9 software. My question is: Yes I probably should reinstall my software but this will only be a temporary solution that will become a redundant problem when I again attempt the same update that caused the probllem initially. How can I simply back out the update? What if anything has been done to replace the update that caused the problem. Has there been any posts to this or other forums about this update problem? Please help me resolve this issue.

Adobe Tech support was most helpful on this. First download the updated
Distiller ICC profile files at:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4075&fileID= 3790
Unzip the file and copy only the *.icc files (without regard to the subfolders that they are in - in other words, take the files out of each of the subfolders) to the followng folder in Windows 7:
c:\windows\system32\spool\drivers\color
These new files will probably overwrite some old ones.
This solved the problem for me.
This is actually the best solution though I found that instead of copying all the .icc files to the windows\sys... folder, all you need to do is copy the 3 Video files from the RGB folder (VideoHD.icc, VideoNTSC.icc, and VideoPAL.icc). Once you add these three files to c:\windows\system32\spool\drivers\color you will be good to go.
It seems that this was an error on the part of Adobe in that there is no reason to include Video files for printing. Nevertheless, the distiller will look for these and return the ICC profile error message if those files are not present.

Matlab font issues after installing Java Update 2

Hey everyone,
I am a scientist and I use the program Matlab to prepare plots for papers, presentations, etc. I am already a little annoyed that when running matlab on mac there are issues of text content cut off in the figures. More importantly after the java update 2 the matlab font looks HUGE. If you change the font setting, it will look normal, but sometimes shift the text. Does anyone know how to fix this? Matlab provided a fix for the R2008 version, but nothing for the R2007 version. This program is so important to me and my work, I may have to move back to Microsoft or Linux in order to have MatLab produce the plots I need.
Please let me know if there is an efficient way to fix this problem.
Thanks,
Casey

Hi clamarche,
I have the same problem on my dual quad-core MacPro after updating Java to Java Update 3. All of my font settings were reset. However when I change the font from 12 pt to say 10pt the cursor moves as if the 12 pt font is still used so it does not line up with any characters once a few characters into the line.
I have tried removing all of my preferences and global matlab preferences, but no luck. I have not applied the Java Update 3 to my 17" MacBookPro as to avoid this problem. What version of Matlab are you using? I have R2007b.
As for text being cut-off from your plots, I have found a small but important note to do with the '-r' option for the print command. On the Mac OS X platform, for some unknown reason you should always set the resolution to '-r72'. This has fixed the problem for me. I had the same problem when saving figures as png's that were to be used later to make an animation. All of the scaling was funny until I set the resolution to 72.
I am hoping that I can find as solution. Maybe clearing the Java preferences, where ever they may be.
Regards ...
Horror

Pages having Korean font issues after iOS 7 update.

iWork on my ipad and iphone cannot handle Korean font after iOS 7 update. It displays Korean correctly in those documents I created before the recent iOS 7 update, but breaks down as soon as I try to edit them. Anyone has the same problem with international fonts? Is there anyway to fix the problem? Is it an iWork issue or the iOS 7 issue? It certainly does not look like a hardware issue, because other apps work fine indeed.

You should report this to Apple (as others have):
http://www.apple.com/feedback

Issues after the last update Lumia 920, can't see ...

Hi.
I have this issue after the update. I do not know what's wrong but I can not see my recent calls. Neither can see my sms is sent or the ones I have taken back.
I have tried to call one of my friends. I can hear them but they can not hear me. I have also checked with my operator and they do not have the disruption will harm the network.
So what's really wrong? This happened after the last update I did. Living in Sweden, Gävle uses Tele2 comviq simcard.

When did you update? Have you tried simply rebooting your phone by pressing and holding both Vol down + power buttons for around 10 seconds until the phone vibrates? If that doesn't work, you could try resetting your phone but make sure you backup your data beforehand.

Camera issues after ios 5 update

my iphone 4 issues are as follow after ios 5 update:
camera sometimes takes low resolution photos (without zoom)
camera sometimes goes blank (blank screen)
can anyone help?

You probably haven't "lost" the zoom feature on your iPhone 4, you probably missed that you now activate it using the pinch to zoom rather than tapping on the screen...

Anyone had email issues after 3.1 update?

It seems after I read an email, it still shows it as unread, so after I close out of email, it pops back up showing email to be read. I have had to just physically delete some emails for them to not show. Anyone else seen this?

same issue here...update to 3.1.2 was no help...company I bought my Pioneer from said many customers are complaining about the same thing...no solutions that I am aware of...

Cd burning issue after installing and updating snow leopard

After installing and updating snow leapard to the latest version, the cd burner for i-tunes quit working. it says" burning disk initializing" then "burning disk finishing" comes up with the error "the attempt to burn a disk failed. the disc drive didn't respond properly and can't recover or retry. Any suggestions to fix this problem?

First try other disks, brand new, then try another brand, then consider backup user files and (clean and polish then) c booting off the 10.6.3 disk and simply reinstalling OS X then updating to 10.6.8 again.
Hopefully this should fix the issue in OS X software, you may have to reinstall certain third party software again that it's kext files got kicked out of OS X by the reinstall.
If you get hung booting at any time, simply hold the shift key down and then update your software then reboot normally

Issue after applying Cumulative update on SharePoint 2010 Server

Hi All,
We got an issue after applying the "SharePoint Server 2010 and Project Server 2010 Cumulative Update Server Hotfix Package (MOSS server-package,
Project server-package): June 28, 2011" on SharePoint 2010 server.
Environment details:
OS: Windows server 2008 R2 with SP1
TFS: TFS 2010 with SP1
DB: SQL Server 2008 R2
SharePoint: SharePoint 2010 with SP1
Due to this issue we are not able to proceed further to integrate PS 2010 with TFS 2010. Can someone please suggest solution for this issue.
Thanks,
Rajukumar

Hi Rajukumar,
At the very first, please refer to the article below for installing CU on Project 2010 server:
http://technet.microsoft.com/en-us/library/dd239177(v=office.14).aspx#Installation_steps
I found a blog for this issue:
http://blogs.msdn.com/b/brismith/archive/2011/07/06/project-server-2010-sp1-and-june-2011-cu-formatexception-when-trying-to-provision-a-pwa-site.aspx
In addition, I'd recommend you install latest update for your server.
Regards,
Rebecca Tu
TechNet Community Support

Saving Issues after installing latest update

Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). Any way to fix this?

Hi JasBell,
Which server are you trying to save to?
What happens if you copy the document to the local computer first and then copy to the server?
Regards,
Rave

Battery issue after 8.3 update

BAttery drains like ****.. Overnight drain increased 1% to 15% after this new update. Cant use phone handy need to be charged after A hour or 2

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups
Maybe also take a look at this page about battery drainage

Bluetooth issues after 10.2.1 update

Since updating to 10.2.1 a couple of days ago, my Z10 no longer connects with my bluetooth headset, car kit, or laptop.
I've tried deleting all and then pairing them again however the phone isn't found by my laptop and I just get a "cannot connect" message for the others.
Any help?

Same issue here with Mercedes car. I hope BBRY will fix it quickly because it's also a major issue for me like many others and it could seriously be the frist time I don't consider a BBRY since 5 years!

Recovery Partition Missing and Bluetooth Issues After Update

After upgrading to 10.9.3 my recovery partition is gone and my bluetooth will pair with a new device, connect, and then disconnect. After that I am not able to reconnect the new bluetooth device. I can see it, but can't connect to it. I have tried multiple bluetooth devices, and they all do the same thing. I am really baffled about the missing recovery partition. Any ideas?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

Bluetooth Issues after 3.1 Update

Similar Messages

Maybe you are looking for