Bluetooth issues when using smartwatch on the z1s

I'm having some Bluetooth issues when using my smartwatch. I usually use my z1s with my car radio via Bluetooth to listen to music and for making calls. Now that I got a sony smartwatch I always got problems with the calls. It looks like that the Bluetooth turns off during the call when I'm using the smartwatch. I already tried by deleting and pairing again the z1s, but nothing works. Not sure if maybe the z1s does not support the smartwatch and the care radio Bluetooth connection at the same time. However it works fine when playing music! The problem is just with the calls. This never happens before I got the smartwatch.

I have the Tmobile Z1s and a SW2 and have the same issues with multiple devices:
1) Bose Soundlink Mini
2) Sony MBR-100
3) My car's bluetooth
4) Ford Sync
5) Sony SBH20
6) Motorola S305
If the phone connects to the A2DB device, it will typically play fine for several minutes. Then, audio will drop out. If I do nothing, after several minutes my watch will vibrate to show it has disconnected. Sometimes audio then comes back, and sometimes it doesn't.
Sometimes my phone will not connect to my car. Then, if I can get it to connect, it will only allow for phone audio, not media audio.
This issue has been on (2) Z1s's with the SW2. The first I returned due to touch screen issues, which the second one also has. All of the devices above worked perfectly fine with my Xperia Z, Galaxy S2, HTC One, etc. The Xperia Z and the SW2 never had any problems.
Honestly, this phone has been incredibly frustrating. If the upcoming updates for either the SW2 or Z1S don't fix this issue, I'm going to return it and get something else.

Similar Messages

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

IPhone Wifi and Bluetooth interference when used simultaneously

I am presently using AirFoiI to stream audio from my PC to my iPhone. AirFoil uses the same protocols as AirPlay. AirFoil/AirPlay streams an Alac audio codec using a bandwith of 1,50 Mbs on average irrespective of the audio codec and bit rate of the source file.
The audio stream received on my iPhone through WiFi is send over simultaneously to my Bluetooth speaker.
When using AirFoil/AirPlay, I regularly hear distortions at the beginning of a track and also randomly when a track is playing. The distortions are a lot more when I move the iPhone around. I am almost 100% sure that these sound distortions are because of Bluetooth interference on the iPhone itself when simultaneously receiving an audio stream from AirFoil/AirPlay and sending an audio stream over bluetooth to my speaker.
I also have done some tests using "Net Meter" and "TCP-view" from Sysinternals on my Windows 7 PC. On "Net Meter" I have never seen any WiFi drop outs or distortions regarding my home network.
My bluetooth speaker supports the A2DP AAC audio codec. This was an important feature for me before I bought the device because the AAC audio codec provides normally a relatively good audio quality over Bluetooth. At the time it did not occur to me that there might be a possible Bluetooth interference coming from my iPhone itself. I presumed that the Bluetooth on the iPhone would use a 2,4 Ghz RF channel not in use by WiFi so that WiFi and Bluetooth used on the same device simultaneously could never distort each other. I was clearly wrong. Put shortly, the problems I encounter are presumably solely caused by the firmware/software on my iPhone. I hope this will eventually be resolved with some future iOs 8 updates. There were indeed many people having Bluetooth issues since iOs 8.
I know the best solution would be to wire my speaker optically with an AirPort Express or an Apple TV. I have not yet decided between the two.
Even when there exists a "wired" solution, I think an expensive device such as an iPhone should be able to make sure that there is never interference between WiFi and Bluetooth when used simultaneously on the SAME device/iPhone.
I hope that some specialists will give their views on my "nonprofessional" analysis and some more in-depth information.

Now will this work:
Airport extreme set to BOTH frequencies and my older wifi stuff like Iphone and printer will automatically connect via 2.4GHz and Macbook will connect to 5GHz so that it will not longe be disruppted by bluetooth?
Unfortunately, no one can predict exactly what will happen in advance with wireless and interference issues. Your chances will improve, though. It might be a good idea to understand the store's return policy before you buy.
What if the Macbook will not connect automatically to the 5Ghz network because the 2.4 stream may be slightly stronger. Is there a way to force macbook to connect to 5Ghz?
Yes, use the option to assign a separate wireless network name to the 5 GHz band, and then "point" your MacBook to that network. The other 2.4 GHz devices will connect to the 2.4 GHz band.

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer - When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for abo

The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer -
When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for about 6 months ...

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325
Are you trying to use a 32bit version (I did not even know there is one for Photoshop CC 2014)?
If so – why?

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

I am trying to cut and paste from a program, IEP DIRECT, and normally on my PC I have no problems; however, when using my MAC the formatting gets all mixed up

i am trying to cut and paste from a program, IEP DIRECT, and normally on my PC I have no problems; however, when using my MAC the formatting gets all mixed up

If you refer to this
https://www.iepdirect.com/iepdotnet/hub/index.html
then they have an issue with mac version.
At a first glance, their website is optimized for Windows only, it displays badly in Safari, perhaps it would be better in Firefox or other browser.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H.

Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

Glad you got it sorted out.
Diane123456 wrote:
> Thanks Vix, Joe, and Mad Dog for responding, the site is
in
> development so it's behind a password, which I probably
could share
> but MD is right, it was a margin issue. I didn't think I
needed to
> set a margin but I had to put a left margin of 2em on it
for the
> numbers to display on IE7 or IE6
>
> This is actually a rather common issue with CSS layouts
(it is not an
> issue with designs using tables) - there are several
posts for ULs
> which you may be interested in - see
>
>
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
> 1981&productId=1&loc=en_US
>
> -- and once I got the numbers to show I ran into the
same problem as
> the commenters on the above thread, which noticed that
the vertical
> alignment doesn't work well with IE, and which noted
that apparently
> IE has a stutter because it just kept repeating "1" "1"
"1" -- so I
> finally went with a hanging indent and just put the
numbers in there
> manually - fortunately it's not a long list.... if you
have a fix
> for the stutter, or know of another place to get help
with CSS layout
> browser quirks please share -- if I find another one
I'll share also
>
> thanks again, Diane

When using headphones, only the left side works, HELP?

When using headphones, only the left side works when plugged into the macbook. I've tried 3 different working pairs of headphones and different media types and nothing seems to fix it. HELP?

Hi atgoetz,
Usually this is indicative of a bad headphone jack on the machine end, especially if you've tried three different pairs of known good headphones. Unfortunately there's not much you do to resolve the issue, externally. Considering it's a new machine no sense trying to fix something and making it work. I'd reach out to AppleCare for service on the unit and if it's brand new, possibly arrange a replacement unit.

Odd issue when using UDT (user defined type)

Hi all,
11g.
I ran into an odd issue when using UDT, I have these 4 schemas: USER_1, USER_2, USER_A, USER_B.
Both USER_1 and USER_2 have an UDT (actually a nested table):
CREATE OR REPLACE TYPE TAB_NUMBERS AS TABLE OF NUMBER(10)USER_A has a synonym points to the type in USER_1:
create or replace synonym TAB_NUMBERS for USER_1.TAB_NUMBERS;USER_B has a synonym points to the type in USER_2:
create or replace synonym TAB_NUMBERS for USER_2.TAB_NUMBERS;Both USER_A and USER_B have a procedure which uses the synonym:
CREATE OR REPLACE PROCEDURE proc_test (p1 in tab_numbers)
IS
BEGIN
NULL;
END;And in the C# code:
OracleConnection conn = new OracleConnection("data source=mh;user id=USER_A;password=...");
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "proc_test";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter op = new OracleParameter();
op.ParameterName = "p1";
op.Direction = ParameterDirection.Input;
op.OracleDbType = OracleDbType.Object;
op.UdtTypeName = "TAB_NUMBERS";
Nested_Tab_Mapping_To_Object nt = new Nested_Tab_Mapping_To_Object();
nt.container = new decimal[] { 1, 2 };
op.Value = nt;
......This code works fine, but it raises an error when I change the connection string from USER_A to USER_B, the error says:
OCI-22303: type ""."TAB_NUMBERS" not foundInterestingly, if I change op.UdtTypeName = "TAB_NUMBERS"; to op.UdtTypeName = "USER_2.TAB_NUMBERS", the error is gone, and everything works fine.
Anyone has any clues?
Thanks in advance.

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

If 3G connection drops when using dictation, will the dictation be saved?

If 3G connection drops when using dictation, will the dictation be saved so that it can be used later?

If you mean a voice recording that get transcribed, no.

Bluetooth issues when using smartwatch on the z1s

Similar Messages

Maybe you are looking for