Bluetooth Issues while connected to WIFI

Is anyone else having issues with the clarity of phone calls when on a bluetooth headset, while being connected to WIFI? I have switched my new Note 4 out at verizon. I have switched bluetooth headsets. It only happens when at work and at home. Im always connected to WIFI in those two places. When I turn off my WIFI, i have no issues

It happens on any WIFI when I'm using my bluetooth. I thought maybe I got a bad phone but after swtiching it out at the Store and trying multiple ears (different brands as well). I'm convinced this is the problem. I never had an issue with my Note 3 and I've had the same bluetooth headsets. In the past, I always kept my WIFI on so it connects to trusted networks automatically. I believe it's a Verizon issue because the Samsung Reps at BestBuy inform me of some other issues but not that one. It seems that different carries are having different issues. Can you please make whom ever aware so they look into this issue.

Similar Messages

  • I have the Droid Razr Maxx HD and I cannot send multimedia messages while connected to WiFi.

    I have a mobile data "signal," but need to disconnect from WiFi whenever I want to send a multimedia message, including a group message. I can receive multimedia messages while connected to WiFi, sending them is the only issue. Is this a common issue? And is there a fix for it?
    It's very inconvenient as my phone is almost always connected to WiFi and I often use group messages for work.

    Don't believe someone who tells you that you have to turn off WiFi - I FINALLY got someone who knew what they were doing at VZW - and she had me do the following - and VOILA - it worked!  This is a known issue and level 2 support has access to many similar cases
    Call VZW Tech support and tell them you want them to do the following:
    1. You turn off your phone
    2. They "Refresh the network on the voice and text side"
    3. They "Sync network with billing"
    4. You turn your phone back on
    This solved my problem......

  • 10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

    This post was initially added to this discussion: 10.9.2 Mavericks update issues
    I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
    One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
    Here is the error that gets “popped-up” in the Eclipse:
    Timed out while waiting for Perl debugger connection
    … and here is exact exception stack that gets printed:
    Unable to connect to remote host: 130.10.210.74:5000
    Compilation failed in require.
    at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
              main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
              eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
    BEGIN failed--compilation aborted.
    at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
    Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
    END failed--call queue aborted.
    at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
    (of course IP address changes dynamically for each VPN connection session)…
    I was able to prove that this issue is related to 10.9.2 update:
    Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
    No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
    No configuration changes were introduced around the same time
    Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
    Steps to reproduce this issue:
    In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
    Connect to VPN
    Start Epic debugger to debug same script
    Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
    I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
    is there a trouble ticket to track this issue?
    is there any progress?
    what's the ETA for an update that fixes this problem?
    - Val
    Message was edited by: vpogrebi

    Am I the only one experiencing this issue ???

  • I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

    I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.

    Hi _Pchay,
    Accordign to the artcle below, it looks like you have done all the troubleshooting steps and your next step may be to contact Apple Support. 
    iOS: Wi-Fi settings grayed out or dim
    -Griff W. 

  • MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

  • Issue while connecting from Biztalk adapter to SAP ECC 6.0

    Hi Friends
    Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
    Can you please tell anybody the solution for this.
    Regards
    Praveen

    HI,
    is there a special "formation" to put in the user / pass ?
    maybe a missing domain ? or missing values like "/" or "\" ?
    Do you getting this error in the Biztalk Monitor (Visual 2005) ?

  • My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all. Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

    My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all.
    My connection is fine because Im using it on my macbook pro perfectly, so the problem is definetly on apple tv.
    Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

    From what I understand from this post, yes you do qualify for a replacement.
    http://www.macrumors.com/2013/04/15/apple-initiates-replacement-program-for-3rd- generation-apple-tvs-with-wifi-connectivity-issues/

  • Issue while connecting to MS SQL Server 2008

    Hi everyone,
    I have not seen any thread that gives me a clue to my problem.
    I have OBIEE 10.1.3.4.0 on Windows.
    I have created an ODBC3.5 Datasource to a SQL Server 2008 and the test connection is successful.
    I have also imported the tables from the SQL Server 2008 into the Physical Layer of the OBIEE Administration tool. However after check-in, my problem begins trying to do an Update Row Count with the following Error message:
    NQODBCSQL_STATE: HY000nQSError: 10058 A general error has occurred.
    nQSError: 43093 An error occured while processingthe EXECUTE PHYSICAL statement.
    nQSError: 16023 The ODBC function has returned an error. The database may not be available, or the network may be down.
    Any suggestion or pointer will be greatly appreciated.

    Reading your post Issue in connecting to MS SQL Server 2008 I guess this thread here can be closed.
    Cheers,
    C.

  • Cellular data being used while connected to WIFI and not in standby

    I am connected to my home WIFI on my iphone 4, but while my router is not connected to internet (so I should not have internet on my iphone), I noticed I am still receiving push notifications,
    I finally read here that while on standby, wifi is turned off and 3G is used, ok.
    now here is the problem, looking at the General>Usage>Cellular Usage, even if I am not on standby and I am using the phone, I have data usage (sent and recieved), I reopen the Celluar Usage and see the numbers are constantly increasing, and more strange is some (not all) of the push notification do come through (eg in my case for an app called FavFriends),
    another friend of mine has a simillar problem on iphone 4s.
    what is this celluar usage in the background?????

    from what I knew so far, iphone should not use the 3G if wifi is connected, eventhough there is no internet on that wifi,
    so in my case, if iphone is actually detecting no internet and switching to 3G, I should have internet on all apps (safari, etc..) which i dont, just data usage increasing with no internet in any apps (that is a 3G usage which is limited more than even when on standby),
    and if it is not supposed to switch, it brings another question, that if 3G is used when wifi connected (with no internet), are there any background 3G usage (push notifications, etc), while wifi has internet and it is supposed to utilize the wifi internet?
    so basically, I was under the assumption that 3G would not be used unless wifi is disconnected, regardless of internet access, and I dont find anything that says otherwise.

  • Creating hotspot while connected thru wifi

    I can easily turn mu iMac into a WiFi hotspot when it's connected through Ethernet. However: is it possible to share you internet connection (creating a hotspot) while being connected through WiFi (imac connected to the Internet through WiFi allowing other units to connect to it as hotspot also through wifi).
    Any help would be greatly appreciated.

    Thank you very much for your reply. I'd like to understand WHY this is impossible. Is it because wifi cards are not "full-duplex", i.e. they cannot handle being a sender and a receiver simultaneously?

  • SET access issue while connecting to MQ explorer from OSB.

    Hi,
    Could some one please advice, why OSB is expectign the SET access must be enabled while connecting to the MQ manager, which is not allowed in the non-dev regions.
    ----- amqzfubx.c : 594 --------------------------------------------------------
    09/26/12 11:30:41 - Process(7899.11289) User(mqm) Program(amqzlaa0_nd)
    Host(mqhmts2)
    AMQ8077: Entity 'mqalsb ' has insufficient authority to access object
    XXX.SEU.MEM1.POSTTRADE.REQ'.
    EXPLANATION:
    The specified entity is not authorized to access the required object. The
    following requested permissions are unauthorized: set
    ACTION:
    Ensure that the correct level of authority has been set for this entity against
    the required object, or ensure that the entity is a member of a privileged
    group.
    Here our requireemnt is we have 100 members which are posting the messages through OSb to the external partners, for this in OSB we have used Topic/Subscription model, where it uses RFH2 header to get the particular memebr name like MEM1- MEM100. So for thsi we have used MQ protocol to fectch the Topic string value where MEM1 to MEM100 are configured to the topic string.
    But we are seeing the above erros when deployed to non-dev regions.
    Could you please advice is there any settign we can chaneg in OSB while configuring the MQ details.
    IN OSB we have configured the MQ copnnection details as below.
    Connection Type mqTcpModeType
    MQ Host Name xxx.unix.lch.com
    MQ Port Number 1234
    MQ Queue Manager Name XXX.ALSB.YYY
    Queue Manager CCSID
    MQ Queue Manager Channel Name ALSB.CONN
    SSL Required false
    Reference to the Static Service Account COMMON/Service Accounts/MQ
    WebSphere MQ Version v6
    MQ Connection Pool Size 100
    MQ Connection Timeout 1800
    MQ Connection Max Wait 3
    Is there any change that needs to be set in to avoid the SET permissions issue.
    Thanks.
    Edited by: user12679330 on 26-Sep-2012 05:30

    Sorry for the delay.
    siebenv.sh and odbc.ini should be created after the Siebel Server has been configured using the configuration wizard.
    Check Doc ID 604303.1 on support.oracle.com regarding the odbc error and let us know if it is helpful.
    Thank you,
    Wilson

  • Is anyone else having issues staying connected to WiFi at home?

    Is anyone else having issues with their Iphone5 staying connected to WiFi.  I connect at home to my WiFi and within 5-10 minutes I have been disconnected and having to reconnect once again.  Thanks!

    I'm having problems finding my wifi in my house when my iPhone 3g's wifi was better. Now my iPhone 5 can't even scratch the surface of finding it.

  • DPS 6.3.1.1 - Issues while connecting through SSL

    Hello !!
    I have a issue where my application client reported that they are unable to connect to the LDAP using SSL. Where as everything works fine in LDAP (non secured)
    This is how our deployment looks.
    Clients <=> Load Balancer <=> DPS (2 instance) <=> DS (2 masters)
    The DPS is configured with DSP (data source pool) (with proportional algorithm of 50:50 to backend data sources). Client Affinity ("read-write-affinity-after-any") is configured for this DSP. The DSP is attached with 2 data sources.
    So when the client connected in a secured port using LDAPS, they are unable to authenticate/search against this environment. No issues were found in DS logs for any of the bind/search requests. But in DPS, we noticed below log which i want to get clarification on.
    Note: I have removed the hostnames/Ip where ever applicable from the logs.
    =====================================================
    [04/May/2011:12:24:39 -0400] - PROFILE - INFO - conn=1255260 assigned to connection handler cn=default connection handler, cn=connection handlers,cn=config
    [04/May/2011:12:24:39 -0400] - CONNECT - INFO - conn=1255260 client=x.x.x.x:52461 server=x.x.x.x:636 protocol=LDAPS
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=0 BIND dn="uid=app_id,ou=applications,dc=example,dc=com" method="SIMPLE" version=3
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=0 BIND dn="uid=app_id,ou=Applications,dc=example,dc=com" method="SIMPLE" version=3 s_msgid=3 s_conn=ds_Master2:26560
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=0 BIND RESPONSE err=0 msg="" s_conn=ds_Master2:26560
    [04/May/2011:12:24:39 -0400] - PROFILE - INFO - conn=1255260 assigned to connection handler cn=CH_ENV_catch-all_LDAPS,cn=connection handlers,cn=config
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=0 BIND RESPONSE err=0 msg="" etime=0
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=1 msgid=2 SEARCH base="ou=people,dc=example,dc=com" scope=2 filter="(uid=abcdef)" attrs="*"
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=1 SEARCH base="ou=people,dc=example,dc=com" scope=2 filter="(uid=abcdef)" attrs="*" s_msgid=498 s_conn=ds_Master1:26072
    [04/May/2011:12:24:39 -0400] - SERVER_OP - INFO - conn=1255260 op=1 SEARCH RESPONSE err=0 msg="" nentries=0 s_conn=ds_Master1:26072
    [04/May/2011:12:24:39 -0400] - OPERATION - INFO - conn=1255260 op=1 SEARCH RESPONSE err=0 msg="" nentries=0 etime=0
    *[04/May/2011:12:24:39 -0400] - DISCONNECT - INFO - conn=1255260 reason="other" msg="Exception caught while polling client connection LDAPS.x.x.x.x.52461 -- javax.net.ssl.SSLException: Inbound closed before receiving peer's close_notify: possible truncation attack?"*
    =======================================================
    If noticed in the above logs, the initial Bind request via LDAPS is routed to Master 2. But the susequent search request (for user abcdef) is routed to Master 1.
    And finally the DISCONNECT operation came (last line) without a proper unbind.
    Is this alternate routing a expected behavior when client affinity is turned ON ? Is this exception causing the application's search failures ?
    Please shed some pointers on this..
    Thanks.
    Edited by: Prasee on May 6, 2011 8:07 AM

    Pls see inside:
    Thanks for the reply. Yes the client is a loadbalancer in this case. So does it mean that this behavior (sending request to 2 different DS in a same connection) is expected ? I have few additional queries that arise from your reply :-)
    Loadbalancing algorithm takes precedence "if the request that starts client affinity has not yet occurred"
    Since its the load balancer that connects to DPS for any/every request every time., How do the DPS know whether a request that starts client affinity has occurred / not occurred ?Well, client affinity starts with a certain operation (not by establishing the client<->dps connection) as specified by your client affinity policy. In your case ("client-affinity-policy:read-write-affinity-after-any") it starts for all operations after the first read or write operation. DPS is not a (network) connection based router - so it does not route the client connection to the data source but forwards the client operations (request) on dedicated bind,read,write,.. connections to a data source selected by your load balancing and/or client affinity policy.
    In our case, Its the same connection (conn=1255260) that receives bind and search request from the client. So when a connection is established, the client affinity should have got enabled and sent the bind request to Master 2 initially, so for the next search request, shouldn't it be sent to Master 2 again ?No, see above.
    >
    Sorry for these questions, I am basically trying to understand more on how client affinity works when a load balancer is in between.
    Coming to the exception,
    [04/May/2011:12:24:39 -0400] - DISCONNECT - INFO - conn=1255260 reason="other" msg="Exception caught while polling client connection LDAPS.x.x.x.x.52461 -- javax.net.ssl.SSLException: Inbound closed before receiving peer's close_notify: possible truncation attack?"
    Does this abrupt shutdown of connection means the search response would have got dropped before reaching the end client (application) ?Yes, that may be possible ...
    >
    Thanks for your help !!

  • Yoga 13 Bluetooth Issues (Headphone Connection​)

    Hi.
    I've been lurking for a bit and have had most of my questions answered and issues solved by
    this fine community. Thank you!
    My problem is that I can add my bt headphones (I've tried two different sets) in the "add device"
    option, but once I shut the bt device (headphones in my case) off and then turn them back on
    again the sound continues to come from the tablet or stereo speakers (which ever I'm using at
    the time) and the sound won't switch to the bt headphones automatically. I must manually go the
    Sound settings in Control Panel options and select the bt headphone to use them again. As of
    right now I've got a shortcut to the Sound options on my desktop. Now this isn't a deal breaker for
    me, but there's got to be an easier way! LOLS!
    Any suggestions?
    Thanks!
    And for the record I have no wifi issues and I've upgraded to 8 gigs of ram so I'm keeping this!!!

    I haven't tried using a Bluetooth headset with Windows, but check:
    1.  Right-click on the sound tray icon, select Playback devices.  Does it show a 2nd bluetooth headset device in addition to Speakers?  If so, left-click on it and try the "Set Default" dropown menu on the bottom to make it the Default device (or some other option that works better).
    2.  http://support.microsoft.com/kb/933144
    3.  http://www.computing.net/answers/hardware/making-b​luetooth-headset-default-audio-device/87178.html

  • Date Format issue while Connecting to Oracle8i and Oracle10g

    Hi All,
    While playing around with JDBC drivers, I came across this weird issue. I have a Local machine with Japanese Locale and I have 2 Database Servers that too with Japanese Locales and Oracle 8i and Oracle 10g each. Now, I connect to these database using JDBC drivers for 8i and perform "select sysdate from dual". Then, m getting dates with 2 different format. While 8i being returning Date with 'DD-MON-RRRR' format, 10g returns date with 'DD-MM_RR' format.
    Initially I thought it might be because of some VM Locale thing but when I connected to 10g DB from 8i Oracle client, this behaviour did not changed. Which mean in this case also the date format returned ny the query was different.
    Guys F1! F1! (Help! Help!) Appreciate your help to understand this process. Links and suggestions welcome... :)

    I guess u did not read the whole content. I mentioned this but the difference in behaviour with respect to JDBC drivers made me post this in Java forum.
    As I mentioned, it has something to do with the jdbc driver or oracle server itself. Agreed, but what that "something little to do" is the maiin question.
    I mentioned that I want to understand this process about how JDBC driver works with Client VM specific Locale settings while interacting with Oracle Database.
    Don't you think it could be interesting to know, what it is which brings this difference in results. Its all about clarifying the small bits & pieces which stays unanswered if one overlooks. Its own perception, I felt like asking question, no offense right!

Maybe you are looking for