Bluetooth , iSync ... msg: dial up network? on KRZR K1m

When I iSync my moto KRZR K1m I get the message "dial-up network?" I must decide to "deny" or "grant" in order to sync . My previous phone Razr just did a blip sound at the start and end of iSync. What causes this message ? When I initialy paired the phone & mac , I chose not to make my phone a modem in the BT set-up process. Could this have something to do with it ?
thanks
VB

Figured it out. It was in BT link / device history / edit / device details / Access : set to automatic.
in case anyone was curious
MotoKRZR k1m now does phone contacts and iCal , the full monty in iSync(bluetooth)
Wish I had known I was gonna get gypped on the Bluetooth headphones (not supported). Can't have everything
VB

Similar Messages

Dial-up networking implementation

Hi,
I'm currently developing an application that requires dial-up to a RAS server. Client hardware requirements for this app are windows box with either USB/Serial modem or ISDN connection.
Client app will be driven with Swing GUI but I need help on the dial-up part.
My questions are:
1. What kind of technology JAVA provides in regards to dial-up programming? I've considered commAPI but apparently this only work for serial modems only.
2. Can I use JTAPI to setup the dial-up and connection with either modem or ISDN?
3. Or can I use JNI to call windows native dial-up control from my application? If so how?
Glad if someone out there can at answer part of my queries?
Thanks

You can use the JDUN API (Java Dial-up Networking For Windows) that can be found at http://www.JavaAPIs.com. It supports enumerating RAS dial-up entry names, dialing entries, and hanging up entries.

How to terminate Windows dial-up Network session

Need help terminating a Windows dial-up network session from my Java application demo. The application runs on an unattended PC and periodically initiates a Dial-Up networking session, in order to send an email.
I'm binding a Process variable to the output from...
<runtime>.exec("rundll rnaui.dll,RnaDial <DU name>")
The Windows dial-up session starts OK and the mail message is successfully sent. However, when I try to terminate the dial-up session using...
<process>.destroy()
...it does not terminate the Windows dial-up session.

You can use the JDUN API (Java Dial-up Networking) that can be found at http://www.JavaAPIs.com. It supports enumerating RAS dial-up entry names, dialing entries, and hanging up entries.

Can Anyconnect 2.5 call Dial Up Networking

Is there any way that anyconnect 2.5 can call up a dial up networking connection prior to logon?
I know that Secure Mobility 3.0 can do this but not with WWAN (windows 7 gprs) connections.
We have users on anyconnect 2.5 that are using SBL but their modems are not connecting first.
If anyone knows a workaround please let me know
Sam

Is there any way that anyconnect 2.5 can call up a dial up networking connection prior to logon?
I know that Secure Mobility 3.0 can do this but not with WWAN (windows 7 gprs) connections.
We have users on anyconnect 2.5 that are using SBL but their modems are not connecting first.
If anyone knows a workaround please let me know
Sam

Pearl 9100 OS 6 Dial-Up Networking DUN (How can this be done with Telstra) Wireless Modem for Mac

Hi
I would like to know how i can have dial-up networking (Using my Pearl 9100 OS 6 as a wireless modem for my Macbook Pro 6.2) and also the information that has to be applied for Telstra Australia..
Thankyou
Solved!
Go to Solution.

Hi and Welcome to the Community!
Refer:
KB19641 How to Configure a BlackBerry smartphone as a tethered modem on a Mac
Note carefully please that this feature requires your service plan to include the capability...not all service plan levels include it, and not all carriers offer it. Further, sometimes additional software for your computer must be obtained from the carrier. But, any and all carrier-specific questions about this must be addressed to the carrier...here, we can only give you the generic information...your carrier must provide you with any specific information required.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Bluetooth-sms and dial feature with address book

Hi there, i have got a samsung d500 that has bluetooth. I want to use the address book feature where you can send sms from your laptop through your phone and to another phone. I can get up until the part where they are paired! When i click on a number to send an sms to, i can click on it, type my message and afterward click send. However it doesn't send and nothing happens. The dial feature can be clicked but nothing happend either. Please help me because i really want to take advantage of this great feature. Any ideas?
Thanks

I just found this, hope it helps!
list of compatible phones:
http://www.apple.com/macosx/features/isync/devices.html

Using USB port for dial up networking with mobile phone?

I am thinking of using my mobile phone as a dial up modem when i am away from home and it uses a data cable to the USB port. is there a way to use the USB port on a Mac as your source for the internet?
Thanks
Jason

well i dont have the cable yet i just was wondering if that would work. Yes it has bluetooth but i was told you cant use the bluetooth for a modem. Dont know why the phone has the option. How would i set up that option?

Can i use the internet on the iPhone in this case (PC(connected Ethernet) ----Bluetooth --- iPhone(no wifi, no network, bluetooth only))

iPhone (no 3g, no wifi, enable bluetooth)
PC (connected ethernet, enable bluetooth )
PC (connected Ethernet) <----- Bluetooth <------ iPhone : is possible ?

Because you cannot. The iPhone will not allow you to connect to an internet source via Bluetooth. It does not support that profile. If your PC will support Bluetooth, will it support creating its own wi-fi network? Can you transmit/receive wi-fi from the PC? If you can do that, you can connect to that wi-fi network with your phone.
Sorry, just read you did not have wi-fi on the phone. Why not?
Message was edited by: ChrisJ4203

Bluetooth and Speed Dial Issue

I just got a new 8830, and have updated to latest software - 4.5.0.77, and am having two problems I can't find answers for.
Bluetooth - I enable Bluetooth; it works fine. After I power down and up again, the Bluetooth is disabled and has to be enabled again. Why does it not just stay enabled?
When the phone is locked (enterprise server), I can't use the speed dials, even though I have the phone set to Allow Calls when Locked. I can make calls, but not use speed dial.
My old 7130e allowed did not these things. Are there ways to fix these?
TIA...
Peter

Hello and welcome to the forums;
Are any of your contacts assigned to the Z or B keys? If so, try reprogramming those contacts temporarily to another key. Also, have you tried un-assigning a speed dial and then re-assigning it to see if the speed dial comes back?
Hope this helps,
TreoAide

ISDN and Dial up Network

Dear Sirs,
I have an ISDN network as the following:
Main office :
Cisco router 2821
Hwic-1CE1T1-PRI
Branches :
- Cisco router 1841
- WIC-BRI- S/T -V3
After I complete the configuration all branches working well but I can't add new branches because there is no ISDN lines available in these places just I found Telephone line (Dial up).
The problem is what I need to add in the main router ( Hardware and configuration) to make the main router accept the dial up calling ?
Find the attached image about the network which I need.
Note:
ISDN branches are working well only the dial up branch (PC) is not working yet.
Thank you for your help.
Regards.
[email protected]

Dear p.bevilacqua,
Thank you for your reply.
About the PVDM2-xDM where can I install it? on motherboard inside 2811 router ? and what hub did you mean ?
Please see tha attached image it's what you mean?
In the branches I want to use the personal computer ( Win XP ) because in some branches just we have 1 computer .
Regards
[email protected]

Treo 650 Bluetooth iSync

Hi, I can iSync my Treo 650 to my Powerbook using a USB cable, but haven't been able to get this to work over Bluetooth. I have followed the instructions on the following page: http://www.palm.com/us/macintosh/wireless.html. I notice that my Bluetooth-PDA-Sync port is perpetually in use though. Any ideas?

Take a look at these instructions from Palm about interconnecting a Bluetooth wireless Palm device - in this example, a Zire 72:
] http://www.palm.com/us/macintosh/wireless.html
Once you've paired your device, this somewhat outdated page provides instructions for configuring iSync for use with a Palm device:
] http://www.palm.com/us/macintosh/isync.html
Although the instructions apply to Mac OS X 10.3.9 and iSync 1.5, you can use them as a general guideline to connect your Treo under Mac OS X 10.4 and iSync 2 or later.

D Link 120 Bluetooth adaptor Interferes with the network preferences for BT

Hi
I just purchased a D Link 120 Bluetooth adaptor adaptor for my G4 machine running OSX10.4.10.
When I connect it to a usb port, it works just fine and can see my mobile phone transfer files etc. The real problems begin when I restart my machine. On initial start up I cannot connect to the internet and in the network pane of the system preferences, I get a message saying a new port has been detected called Built in Ethernet-1
When i click apply changes, the computer once more connects to the internet, however the name under which it connects is now saying Ethernet Adaptor ((null)). In short, is there a method to prevent the Bluetooth adaptor from interfering with my settings to connect to the internet?
Thanks
Jon

Dear Justin,
Did you end up getting this router? If so how have you found it?
Thanks,
Scot.

Bluetooth tethering works but "create network" doesn't?

Hi,
I use a Verizon Blackberry Storm tethered via Bluetooth for internet access with my MacBook. It works very well. I want to use that connection to create a local network so my wife and kids can use it for internet access when we're on vacation. Last summer, when I had a USB cellular modem, that worked very well. I clicked on the Airport icon, clicked on "Create Network", named the network, and a minute later they were able to find it and use the internet. When I do the same thing now everyone can see the network and join it but they get no internet access. I have internet sharing turned on. I suspect the network isn't acting as a DHCP router so the remote connections don't have valid IP addresses. But I don't know much about these things. I'm puzzled why the system worked with a USB modem but not with a Bluetooth connection. All suggestions welcome.
Thanks,
Marc

Yes, the debug SWF works fine. When I run the release SWF, I just see the part of my application which shows while my XML files are supposed to be loading. Loading never actually happens so my application stays in the state which says "Loading configuration" or whatever I show there.

Nokia N96, Bluetooth, and voice-dialing....

Hi,
I upgraded from my N80 to an N96 and, being a rep and frequently on the road, Im finding the voice-dialing to be a real PITA.
The N80 would work just about anywhere. Car, street, pub, shops, wherever, it understood who I wanted to call. Not perfect, but close.
The N96 doesnt even PRETEND to understand me, throwing up any name at random it seems.
Worse, it is all very haphazard to use.
You press the top right function button and hold it down. On the N96, you could hold it for a very long time before it responds. Since the processor in this phone is way underpowered, it a second or two before your hear the Speak Now confirmatory beeps.
Couple that with the problem that many Bluetooth headsets power-down momentarily, it means that when youre driving along in the car and hold the button down on your BT headset, you dont actually hear the beeps. So you have to look down at the phone to see what its doing. While driving, this can be dangerous.
Now, because you ARE driving, the N96 is not likely to understand you anyway.
Nokia!! You need to go back to the drawing board here!!
1) Fix the voice-dial activation - pressing the top-right button for two seconds is plenty.
2) Play the bleeps WHEN the Speak Now screen comes up, not before! My N96 can take anywhere between 1 and 5 seconds between the bleeps and the Speak Now screen appearing!
3) Play the bleeps a bit longer when the Bluetooth headset is activated. Most Bluetooth headsets take a second or two to wake up - the sound is over by then and you miss it.
4) Go back to the N80 and read the code for what you did in that phone. It worked fine there!
Ian Nicholson
Poor Sod/N96 Owner
Nokia: Connecting People... with iPhones.

Still here is no improvement with voice dialing with ver 12 soft and training sessions to n96.
It handles well with some names, but not with most. My old N95 did it much better from beginning (no training need!).
And extra case is with bluetooth HF - I stopped for waiting now for this stupid "beep" that is coming or before or after or in the middle the time, when voice detection screen is there. Now I just try to say the name about 2 sec after pressing BT button.
So, I hope some good Nokia engineer happens to read those voice dialing posts and in soft ver 13 we get better dialing (and finally somehow faster phone). Or do we, all who don't like extra slow processor should go in same day to service/operator and give in protest about the speed..

I cant get my bluetooth to work on a network in sc...

hi. plz help me coz i cant get my bluetooth device to work in a skool computer.

Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

Bluetooth , iSync ... msg: dial up network? on KRZR K1m

Similar Messages

Maybe you are looking for