Bluetooth Keyboard and Mighty Mouse disconnecting

I've been having a problem with my keyboard and mouse (both connected by bluetooth) disconnecting while I'm using them or disconnecting in the middle of the night and my computer wakes up to tell me about it. The latter doesn't seem that bad, but my computer is next to my bed and it's really bright when you're about to fall asleep. I know there have been previous posts about this that I've found, but they've all been archived with no solutions. I've tried deleting the pairing information and reconnecting, but from time to time, my mighty mouse will disconnect and will not reconnect. I usually have to power down completely, turn off the mouse, walk away for a little while, and then when I restart my iMac, it will tell me there's no mouse connected and will finally reconnect to it.
If anyone has anything they can tell me about how to fix this problem, or at least tell me how to disable the computer from waking up when the keyboard/mouse is lost, I'd appreciate it.

Hello and Welcome to Apple Discussions...
"disconnecting in the middle of the night and my computer wakes up to tell me about it."
Open System Preferences/Bluetooth. In the Bluetooth pane click Advanced. Deselect "Allow Bluetooth devices to wake this computer"
As for disconnecting. Have you replaced the batteries lately? System Preferences/Keyboard&Mouse/Bluetooth. If you are down to one green bar, change the batteries.
Carolyn

Similar Messages

  • Will an Apple Bluetooth Keyboard and Mighty Mouse work with a PC?

    I would like to use both with a pc as well as my macbook but I have no interest in purchasing if i do not know if it will work? Does anyone have any experience?

    My only experience is with the Mouse.
    It works just fine in Windows. When you pair it up you need to use the password 0000. (That's in the manual)
    It does not show you a battery meter though so you will be guessing about the status of the battery.
    You will want to keep a USB mouse around to set it up for the first time. Windows will not automatically ask you to pair up a mouse if it doesn't detect a USB mouse is present.
    I expect the keyboard is exactly the same. Bluetooth is a standard for both Mac and Windows operating systems.

  • Help with Wireless Keyboard and Mighty Mouse please!

    Hello. I own the wireless Mighty Mouse as well as the wireless keyboard for Mac, and while ago I set them up to work on my Mac, but I don't use them very much so I want to give them to my parents for their Mac. The thing is, I forgot how to set it up or install it or whatever. Can anyone tell me how to get the wireless mouse and keyboard to work, or what the install process is for them? Was there a CD that came with them that I need to install drivers with or something? Anyways, I have the mouse and keyboard sitting up here next to this computer, and I've turned them on with the switches on the back, but they're not working. What do I do next? Thank you!
    -- Andrew

    Solution
    Turn your Bluetooth keyboard and/or mouse off for 30 seconds, then back on.
    If the keyboard or mouse doesn't respond, or if an alert message appears again:
    Connect a USB keyboard or mouse.
    Open Bluetooth preferences (choose System Preferences from the Apple menu, then click Bluetooth).
    Verify that Bluetooth is turned on. (You can also do this with the Bluetooth menu bar item, if enabled).
    Pair the keyboard or mouse by setting it up as a new device.

  • New Mac Mini and 2006/2007 Wireless Keyboard and Mighty Mouse

    Will my old wireless keyboard and mighty mouse from 2006 and 2007 work with the new Mac Mini?

    Thank You!

  • Mac Mini 2014 with Apple bluetooth keyboard and Magic Mouse

    Hi all,
    I'm currently in the process of moving from my old MacBook to a Mac Mini 2014 and I have a couple of questions regarding functionality of the Apple bluetooth keyboard and Magic Mouse with the Mac Mini.
    As these are the only keyboard and mouse I have available to me as I currently only have the one computer in the house, I'm wondering how I will pair them with my new Mac Mini (arriving next week for Christmas) without a wired user input device (keyboard or mouse). When I paired them with my MacBook, I of course had its trackpad and keyboard to navigate through the various steps, but as the Mac Mini does not have these, how does the pairing process work? Will I have to get my hands on a wired mouse/keyboard? I'm asking in advance because I need to get my new system up and running to start work on 27th December and so I need to know if I should pick up a cheap wired mouse/keyboard in advance.
    My second question relates to the Mac Mini, Apple bluetooth keyboard and Boot Camp. Usually, when I want to boot into Windows on my MacBook, I hold down the Option/Alt key on my MacBook's built-in keyboard to be given the choice of operating systems. Sometimes when I do this using the bluetooth keyboard, it hasn't paired in time and it boots straight into OS X, so I have to wait until that has booted, shut down and then try again. Clearly, this might be a problem on a Mac Mini if I have urgent work I need to complete in Windows, so rebooting over and over until my keyboard finally pairs in time isn't desirable. Any tips here would be greatly appreciated!
    Thanks in advance for your help!

    If you unpair your BT KB and mouse from the old computer they should pair during the initial setup of the Mini. However, sometimes they donot a wired KB and mouse is required. You can use any USB PC KB and mouse.
    Once you get the BT KB to work you can use the Option key on the BT KB while booting to get your choice of OS to boot into.

  • Brand new iMac cannot pair bluetooth keyboard and magic mouse

    Hi there!
    Just received brand new iMac 21" yesterday. Unboxed it, turned it on and none of both bluetooth devices (keyboard and magic mouse) managed to get paired.
    I was able to connect a USB mouse to log into the Mac. Did all turn off/on Bluetooth, turn off/on iMac several times with no luck. Weird thing is that when I lift keyboard on a 30 degree angle above my desk it seems to actually pair with the iMac but then when back to original position it disconnects.
    I've tried the magic mouse with my 2008 Macbook and works flawlessly. After several attempts never managed to pair magic mouse with iMac and as said earlier keyboard is not working on a standard position on my desk. It is frustrating to have paid close to 2,000$ for something that does not even work out of the box... Any ideas or suggestions?
    I'm planning to take it today to nearest Apple Stores but have a bad feeling about "genius" folks being able to help me out. Would be worth changing iMac for new one?
    Thanks a lot in advanced!

    Thanks Barry! If SCM reset means the following:
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    I've done that several times yesterday with no success. "SMC Reset" sounds quite fancy but then you google it and find that is a "simple" shut down and restart protocol... I tried "shutting down" by both selecting option via OS and also physically on the button behind screen.
    I appreciate the help but unless I've done that "simple" protocol wrong it is not working.
    Sorry for the frustration from my side. It just seems too much of a vague story when you hear Apple friends talking things about "the best OS", "best desktop",...and then you pay about $2,000 and find this yourself.
    If anyone else interested I commit to keep this up to date with the feedback I'll get from "genius" folks today. Hopefully they'll prove themselves to live up to their position naming.

  • Unable to connect Bluetooth Keyboard and magic mouse

    I am unable to connect to either my keyboard or mouse. I have a bluetooth keyboard and magic pad in my office that was paired to my Macbook pro but I am not bringing it anymore sense getting my iPad. The iPad seems to see the keyboard but not the pad. But neither will connect. I'm baffled.
    Any suggestions will be much appreciated.

    What do you mean the iPad sees the keyboard but will not connect? Have you un-paired it from the other computer? Should do that first, then do the pairing with the iPad...if it is a supported keyboard. Posters have noted they are unable to pair the old A1016 Bluetooth keyboard, ca 2005, with the iPad.

  • Pairing Apple Bluetooth Keyboard and Magic Mouse Windows 7 64-bit

    Evening Apple Forum!
    I'm camping with a problem regarding the pairing of my two bluetooth devices: the bluetooth keyboard by Apple and the Magic Mouse in Windows.
    I'm running Windows 7 64-bit through Boot Camp 3.1.
    I have tried pairing them as I normally would, turn on the device and then let the MacBook search for bluetooth devices. This, however, didn't work out for both the keyboard and the mouse.
    After some searching in several forums, I wondered if I had to update the driver operating Bluetooth in general. I came to the conclusion this wasn't needed after checking the 'Device Manager' in Windows. The Device Manager displayed under 'Bluetooth Radios' two drivers:
    - Apple Broadcom Built-in Bluetooth
    - Microsoft Bluetooth Enumerator
    This seemed fine.
    After this, I read through a .pdf file regarding Boot Camp directly from Apple, which pointed me towards another method of pairing the bluetooth devices: the devices had to be turned off before or while the MacBook was searching and turned on again after that. Sadly this didn't do anything either.
    I'm clueless, I have no idea whatsoever how to get this to work. This support forum is always a last resort for me because usually I can deal with a problem myself by basic knowledge or reading some forums. This isn't the case this time.
    If anyone has an idea of how to pair these devices to my MacBook, feel free to reply.
    Thanks!

    I've found the solution here on the forum:
    http://discussions.apple.com/thread.jspa?messageID=11491400&#11207285
    All I did was unpair my mouse on Mac and then pair the mouse on Windows 7 and finally re-pair the mouse on Mac. It worked perfectly. It seems that Windows 7 likes exclusivity.

  • Apple Wireless Keyboard and Mighty Mouse

    I've seen several posts about the new Apple Wireless Keyboard losing connection. After searching through the forums trying to find what I have discovered, I've decided to start a new thread. Basically, I've found a way to reproduce the "random" disconnects of the keyboard.
    Open up your favorite text editor, create a new blank document, and strike the 'Return' key with some force. Shortly after doing so, you will notice your green light come on, and a brief connection lost message on your Mac. Seconds later, your connection will reestablish. Perhaps I have some sort of faulty keyboard, and this just happens to have the same symptoms that other people are experiencing, however, I'd like to see if any others have the issue. Of course, it is most likely not just the 'Return' key. Really any keystroke with some force behind it will cause the keyboard to temporarily shut off and lose connection.
    An annoyance that brought me to really find a solution for this issue is that after my keyboard reestablishes its connection, my Apple Wireless Mighty Mouse starts to have issues. The movement along the screen begins to get choppy, and clicks are not always registered correctly, much like if there were some major Bluetooth interference with the device. The momentary disconnect I can deal with, because it has little to no effect on my typing. But when it also messes with my mouse, causing me to have to turn it off and on again, it does cause some considerable downtime.
    Does anyone else notice this phenomenon? Also, if this is already being discussed, please point me to the appropriate thread.

    I have the exact problems with the original poster. The keyboard I think by now is a given, as I'm typing now with the USB connected keyboard I can see the Bluetooth icon intermittently flashing in & out with that little lightening bolt & I have it off?? Why would it still register connections if I turned it off??
    What I don't get is the Apple tech guys are normally really good at saying, "Ok here's the problem, we're on it or heres this fix" & I've notice no type of response, except the usual, "Run script, login on a dummy account or get Cocktail or Onyx" after reading several posts on this same subject all the "go too" answers have been tried.
    C'mon Apple tech fix this problem already!!

  • Wireless keyboard and mighty mouse do not work with windows Vista

    I have a new iMac core 2 duo 20" used by my granddaughter.
    The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
    Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
    Any suggestions would be helpful.

    I had the same problem on the mac mini from my dad with windows XP.
    I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
    I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

  • Apple wireless keyboard and magic mouse disconnecting

    Just bought new MBP Retina Display (OSX 10.8.2) to replace 1st Gen. MacAir.  Used to use Apple Wireless Keyboard and MM on old Air and worked flawlessley for years.  New MBP installed both of these older items (keyboard and MM) cleanley when I set up, but almost instantly, after about one minute of working, the keyboard and MM disconnect themselves and the only way to reconnect is power them off and then power back up.  I have hanged the batteries on both to high end ones and they are still holding charge very wel.
    In my office I have a work PV that also uses two USB wireless devices for the PC keyboard and mouse and then also a small HDX Jam Bluetooth speaker.  Also, my iPhone and iPad are around.  My Airport Express is about two feet away from the MBP as well.  Again, all of these worked just fine with my Air for over five years.
    I took the MBP, keyboard and MM into the Apple store and had them check it out.  Of course it worked perfectley while I was there, plus I learned that in my new MBP the wireless card has the bluetooth built into it and unless my wireless connections got wonky, then the chances of it being hardware were slim.
    I am so out of options.  I have tried to identify all environmental factors.  I have tried moving the MBP closer, further, etc. and still nothing.  It is the wierdest thing and now getting very frustrating because I am having to use the MBP keyboard all the time and it is supposed to be up on a stand and in a more ergonomically friendly position.
    Anyone got any suggestions?  Is there something I am missing?  Is there something in my environment I am unaware of that could be contributing to this?

    I have a 15" MBP Retina display from 2012, Lion 10.7.5, running lid closed with bluetooth mouse and keyboard.  My desk configuration has not changed but in the last couple of weeks I get both devices disconnecting simultaneously, once or twice per day.  The dashed bar disappears from the Bluetooth icon in the menu bar.
    I turn bluetooth off and on (lift the lid, using keypad), and then it all works again.  I don't need to even touch the mouse or keyboard they instantly reconnect.  It is not the magic mouse battery problem, I've suffered through that and have it licked, and that would only take out the mouse.  There's nothing obvious in the system logs.  No change I know of in nearby electrical appliances or WiFi configuration.

  • Wireless Keyboard and Magic Mouse Disconnect

    My Magic Mouse needed a battery change, but after installing the new batteries I could not get it to connec with the computer. After many failed attempts, including rebooting the whole machine, the wireless keyboard suddenly wasn't being recognized, either. What's happening, and how can it be remedied?

    Helooooo wrote:
    Yeah, that was the agreement, because i already have a mouse and keyboard.
    Also, why would i NEED these?
    The mighty mouse is a great mouse that works well with the iMac. The wireless keyboard is also nice. Not having wires all around frees these peripherals and you as well. It's emancipating, opening up new possibilities hard to imagine in a world tethered by wires, shackles, and other physical conduits. The keyboard and mouse become veritable remote controls, severing the leash, empowering you to become lord of your electronic empire, master of your digital destiny.

  • Bluetooth keyboard and mouse connectivity problems

    I have an Apple bluetooth keyboard and Mighty Mouse connected to my Macbook Pro 13", running ML 10.8.1.
    The keyboard and mouse will constantly disconnect and re-connect on their own every few minutes. I'll see the "connection lost" notification, and then shortly after the "connected" notification. Also, even when the keyboard is connected, it often becomes unresponsive and/or strange things happen, such as the special characters menu appearing above the cursor (which I believe there is a keyboard shortcut to invoke, but I'm not doing that; it appears on its own).
    This never happened in Lion.
    Any idea what's happening and how to fix it?

    Hello:
    Try making the devices favorites.
    Barry

  • Cube w/ Bluetooth keyboard and mouse

    Hi ALL,
    Has anyone tried using their G4 Cube with a Bluetooth keyboard and/or mouse? I was thinking of using a USB D-Link bluetooth adapter with my new Bluetooth Apple keyboard and BT Mighty Mouse. I know the USB ports are only v1.1, so I thought I'd ask if anyone has any experience with this combination.
    Any help would be appreciated, thanks!

    D-uh, thanks Brian. I'm sure you're right. I was in a hurry when I posted this and thought it was included older G4 products. I'll re-post in the correct one. Thanks again!

  • Bluetooth keyboard and mouse disconnect issue

    I have a 20" Aluminium iMac with the bluetooth keyboard and mouse. Recently i've started to have some issues where the keyboard keeps disconnecting & reconnecting, also the mouse going slow and jerky. They have been working perfectly fine for the past year but only recently started to play up. I have gone into bluetooth prefs and deleted them and re-connected, this seemed to be a temporary fix but after a while it started again, although not as bad as before. I usually leave my Mac on all the time and just put it in sleep mode, the issue now seems to be waking it from sleep as well. I have tried restarts and re pairing as i said before but nothing seems to be solving the issue. Any ideas or fixes would be appreciated.
    Thanks.

    I'm experiencing the exact same problem. I have an MacBook with the bluetooth keyboard and mouse. I've had them for about a year and they've worked perfectly; this problem has only showed up in the last couple of weeks. I didn't know whether it was a hardware problem or software (perhaps a recent software update), but considering the exact same thing is happening to someone else I'm inclined to think software rather than hardware.
    The keyboard disconnects and reconnects (immediately) a couple of times an hour. It's not such a problem with the keyboard, but whenever that happens, the mouse goes very slow for several minutes, until it finally works out. The mouse doesn't disconnect (I have hardware growl on and am notified of disconnections/connections); it just goes very slow.

Maybe you are looking for

  • What happens to the HTTP header parameters I put there?

    Our tool puts some parameters into the HTTP header. But, it appears that the Dispatcher is not passing them to the WAS.  Could this be? Is there a way to tell the Dispatcher to not drop our HTTP header stuff? Perhaps a configuration setting? I didn't

  • How can I get my iPhone 4 repaired while away from home?

    I will be working in Manila in the Philippines for the next few months. My iPhone 4 has developed a hardware fault and needs to be repaired. It is out of warranty, but I am willing to pay for the cost of the repair myself. The Apple Authorized Servic

  • Count records for a specific date range

    Hi, I am using BI Publisher with Siebel 8.1.1.1. I have a monthly report where I want to count the number of service requests entered per customer per month. I am using the following expression that works for one month: <?count(ssServiceRequest[ssSev

  • Alarms blaring loud enough to damage hearing

    I just installed 3.0 last week and everything seemed to be OK until today. I've set up several alarms in the Clock app and they've worked perfectly for months. Today they suddenly started sounding at maximum volume, so loud that when the alarm went o

  • R3 - CRM customer fields exchange of sales contract

    Hi, I need to replicate custom fields of sales contracts on item level (VBAP) from R/3 to CRM. R3 fields have been created manually earlier and the CRM fields have now been created with EEWB with the option "Adding new fields to Business transactions