Bluetooth keyboard and mouse will not connect

I loaded a linux iso on a usb. Loaded it on a reboot. It may have been corrupted or something, because it did not load correctly. I rebooted the computer again and now the bluetooth keyboard and mouse will not connect. How can I fix this?
Thank you.
Ryan

Hello:
These are knowledge base articles:
Reset PRAM:
http://support.apple.com/kb/PH4405
Reset SMC:
http://support.apple.com/kb/HT3964
Those may or may not help, but they will not hurt anything.
Barry

Similar Messages

  • Help! My Keyboard and mouse will not work all of a sudden on my G4

    I am having a problem with both my keyboard and mouse. I have a graphite G4 and recently had to run disk warrior on i. I have had endless problems with this computer and even have a 2nd hardrive on it since it only came with a 10Gig. Needless to say it is all I have right now. I am running os x 10.2.2 on it and a few days after I recessitated it with disk warrior my keyboard and mouse suddenly went dead while I was on the internet. I tried pluging the two into different usb ports both on the tower and also into the flat panel mac display that it came with and nothing. I plugged in my wacom tablet and that works. i then tested the mouse and keyboard on my husband's dell laptop and they work. I cannot reset the PRAM b/c the keyboard won't work! What do I do??????

    Besides removing the battery, you can do a PMU reset which will zap PRAM. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
    You only describe your Mac as a G4 graphite, which I believe is a G4 AGP. Here’s a diagram showing the location of the PMU reset button.
    G4 AGP Graphics (Sawtooth)/Gigabit Ethernet
    http://img96.imageshack.us/img96/5706/sawtoothlogicbd2yu.jpg
    Look at these links to determine which model G4 you have.
    Power Mac G4: How to Differentiate Between Models
    http://docs.info.apple.com/article.html?artnum=58418
    Power Mac G4: How to Differentiate Between Models (Part 2)
    http://docs.info.apple.com/article.html?artnum=42739
     Cheers, Tom
    Also look at this link.
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
    Message was edited by: Texas Mac Man

  • T410 keyboard and mouse will not wake from 'Power Source Optimized'

    'Power Source Optimized' from the Lenovo Power Manager puts the computer to sleep after a prescribed time.
    To rewake it appears that one must press the power key  briefly.
    The login screen for W7 appears and prompts me to enter my password.
    Only problem is - the keyboard and mouse refused to wake up. Could anyone tell me what the trick is?
    Thank you!
    Ade

    if you use an external keyboard and mouse, would they work when you wake up the computer?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect.  Help?  Have also reset network settings etc

    My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg).  It was the first time I'd used Bluetooth
    Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
    This is major as I am away from my desktop for three months.  Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
    So far This is what I've tried based on other discussions-
    -turned Bluetooth off and unpaired to keyboard which was also turned off
    - turned iPad wifi off and on (several times)
    - forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
    -- reset network settings
    What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling".  Sometimes the airport bars will show, but disappear or flicker.  It never connects with a check noted in settings.   Any attempts to use internet confirm there is no connection
    My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
    Any ideas!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Just got the mac pro and mouse will not connect.

    I've googled the heck out of it and can't find anything wrong.  At this point I don't know what else to say but, the mouse isn't working. Checked batteries, went through ALL processes, and nothing seems to work.  All I get it the green status light blinking or it will say it's connected for 30 secs but doesn't do anything. If anyone else has any other help or info I would appreciate it.

    Sprad05 wrote:
    If anyone else has any other help or info I would appreciate it.
    How far is you mouse from the back of your mac pro and is there anything between those two points?  Beyond about 3 to 4 feet the MM on a mac pro for many people is problematic.  Here's a 24-page thread on this topic:
    Poor Bluetooth reception and jerky mouse
    Bottom line, use a bluetooth dongle (that what I use -- IOGear GBU421) or wire up an external antenna to the bluetooth card inside your mac pro.
    As an experiment you could try doing a smc and pram reset and keep the mouse close to the back of your machine and seeing if it pairs up and stays connected.

  • Installing Bluetooth Keyboard and Mouse in Windows XP Bootcamp

    I just installed windows XP in bootcamp. Problem is that my bluetooth keyboard and mouse aren't connected. Short of getting a USB mouse to connect them, is there any work arounds?

    Yeah. You will need a USB connected Keyboard and USB Mouse too!.

  • Bluetooth keyboard and mouse compatability

    Hi,
    Does anyone know if the older bluetooth keyboard and mouse will work with a 20" imac duo core? The numbers are as follows: Apple Wireless Bluetooth Keyboard (A1016) & Apple Wireless Mighty Mouse (A1197). The imac number I believe is: MA200LL.
    I haven't received it yet though ebay but would like to do the bluetooth thing to keep my desk as clutter free as possible.
    Thanks!

    Taking this a step further; I bought the aluminum wireless KB with my 20" 2 GHz Core 2 Duo. I don't like the layout, so I bought the older style wireless KB (A1016). However, I can't get the Mac to recognize the new KB. I've even gone through the Bluetooth setup assistant to no avail: it just can't find it. I tried having the BT Setup Assistant look for ANY BT device and it sees the KB that way. I can get through to the point of entering the passkey on the computer but I seem to get hung up when trying to enter the same corresponding code on the new KB.
    Any ideas? Do I need to disable the wireless aluminum KB?

  • Bluetooth keyboard and mouse connectivity problems

    I have an Apple bluetooth keyboard and Mighty Mouse connected to my Macbook Pro 13", running ML 10.8.1.
    The keyboard and mouse will constantly disconnect and re-connect on their own every few minutes. I'll see the "connection lost" notification, and then shortly after the "connected" notification. Also, even when the keyboard is connected, it often becomes unresponsive and/or strange things happen, such as the special characters menu appearing above the cursor (which I believe there is a keyboard shortcut to invoke, but I'm not doing that; it appears on its own).
    This never happened in Lion.
    Any idea what's happening and how to fix it?

    Hello:
    Try making the devices favorites.
    Barry

  • Macbook pro does not respond to bluetooth keyboard and mouse at login screen

    i've seen this question floating around and i don't think i've found one that has been resolved. i'm hoping someone may have an answer by now.
    i do not have this issue when i boot into windows 7 (bootcamp) the macbook pro responds to keyboard input and mouse input immediately on the windows 7 login screen. when i boot into mac, there is no response from either. i've seen suggestions of waiting for 30 secods. i still get nothing after waiting for over a minute.
    what i do right now is use the built-in touch pad and keyboard of the macbook pro to get past the login screen. once i'm logged in, i can see that the bluetooth devices are not yet connected (the three dots that go across the bluetooth symbol at the top right of the screen are not yet there). then after a while, maybe about half a minute, the bluetooth keyboard and mouse are connected and i can use them normally.
    it is not a big deal but it is very annoying.
    i am using a logitech bluetooth mouse (v740) and an adesso bluetooth keyboard (wkb-4000bm). i also tried an azio bluetooth keyboard and had the same issue. all these keyboards are made for mac.
    thannks in advance.

    just a correction, the keyboard and mouse don't always automatically reconnect once i'm logged in. most of the time i have to go click the bluetooth icon at the top right of my screen, select the mouse and then select "connect". i have to do the same to the keyboard.

  • Targus bluetooth mouse will not connect in bootcamp

    I have a Targus blueetooth mouse that will not connect in bootcamp. It has worked fine for a long time in XP and 7. Then I upgraded the haddrive and had to do a lean install of Windows 7 and the Apple bootcamp 5. Now it will not connect at all. I have the "Apple Broadcom Built-in Bluetooth" seleted , it sees the mouse but it tries to connect and just stalls. This is very frustrating since without the mouse it is nearly impossible to troubleshoot Windows.

    Bluetooth mouse will not connect my wireless mouse...
    what works +every time+ for me :
    use your fingers to move the cursor up to the bluetooth icon (top right of display)
    click bluetooth icon, select user mouse / connect
    then quickly move the cursor up (with fingers) so it touches or is very close to the bluetooth icon
    and start clicking with your mouse (making sure the mouse is on obviously).
    I have NO idea why but this works on my MacBookPro everytime. If I try to connect without moving the cursor near the BT icon it won't connect (or takes at least 10 trys).

  • Bluetooth keyboard and mouse not function on BootCamp3.0 + Windows 7

    Hi,
    I am 24'' iMac user.
    I have installed boot Camp 3.0 on Windows 7, all devices functions well except bluetooth keyboard and mouse. Both of them cannot be found and paired.
    Any one know how to slove this problem?
    Thanks.

    Have you tried reading the many other posts on this forum that talk about this issue? It seems that by default the services are not enabled for some peripheral devices. Try right-clicking the bluetooth icon, selecting "show my bluetooth devices" (or similar i dont ahve it in front of me), then right click the keyboard/mouse, go to the Services tab and make sure the services are enabled.

  • HT1369 Yes, my cousins Ipod is disabled and I connect it to itunes and it will not connect, it says "the device you have entered has a pass code, enter the passcode to connect." The problem is the keyboard to type in the pass code will not show up. What d

    Yes, my cousins iPod is disabled. It says "ipod is disabled, connect to iTunes", I did that and it will not connect to iTunes, because it needs the pass code. The pass code key board will not show up and I cant connect. Please help me figure this problem out, my cousin is depending on me. Thanks, a concern customer.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

    I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit.  Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • N8 Which bluetooth keyboard and mouse ?

    Hi Folks
     I've had a n8 since last october and am ready for a keyboard with a mouse included or maybe a seperate mouse. I do like the idea of a small control I can use that could be the mouse for remote starting and stopping a movie I play via hdmi.
    I did see a ovi app that could control the playing of a movie via a Wi remote. I do like this, havn't tried this.
    Which bluetooth keyboard and maybe bt mouse do you reccomend ?
    options maybe travel
    unsupported on my knee
    in the car , velcro to the steering wheel  / office
    on the table
    I quite like standard key spacing so I don't have to relearn to type.
     what effective range ?
     does it survive the eventual coffee spill ?
     Otherwise great phone I max it out.
    Regards Don
    ===============================

    Kapteeni wrote:
    From www.matkapuhelininfo.com I have collected following info of working devices:
    - Nokia bluetooth keyboard
    - Apple mouse and keyboard
    - Targus Bluetooth mouse
    - Logitech keyboard diNovo Edge
    - Logitech MX5500 bluetooth mouse ja keyboard
    - Logitech Mouse M555b
    Thank you for collecting and building a list of compatible BlueTooth keyboards and mouses. If you connect the BT mouse will the phone display an arrow cursor?
    --------- Please give feedback by clicking the white star on green box on the left side. Thank you. -------------

  • Bluetooth Keyboard and Mouse - Flaky detection on startup

    My 2009 MP regularly has trouble detecting the bluetooth keyboard and mouse on detection. Mouse will air after a minute or so buy keyboard is getting worse...
    Anyone else see/solve this?
    Thanks
    Paul

    Have you tried reading the many other posts on this forum that talk about this issue? It seems that by default the services are not enabled for some peripheral devices. Try right-clicking the bluetooth icon, selecting "show my bluetooth devices" (or similar i dont ahve it in front of me), then right click the keyboard/mouse, go to the Services tab and make sure the services are enabled.

Maybe you are looking for

  • How to upload an html page?

    Hi, I have an urgent problem and no one here in office seems to be able to help me. We have an html page uploaded in our portal and now I need to upload a new version of it. I have no idea on how to use oracle portal interface to do the job. If it he

  • Production order quantity field

    Dear all, I add a operation (rework operation) in my production order. But I don't know how to change operation quantity. because this field close ,  how  can I open this field for enter new quantity of this operation? and which contol key do I have

  • Question about network simlocks and countries

    No, I'm not asking how to unlock the phone, as that would be unethical. (Whether or not it is illegal is an interesting question, but not one I'm prepared to venture into here.) A friend of mine has a phone that is simlocked to Orange in the UK, and

  • Why do I get an error message when buying my iPhoto book?

    It happens just after the (lengthy) transfer has completed. I have tried some of the tips on this site, eg changing account details, plugging computer directly into modem instead of wireless, turning off the screen saver. But it still happens. What d

  • MacPro with RME FIREFACE 800 ?

    Hy, I would like to know if the MacPro-RME Fireface 800 couple is a good one. Is there any issues, how about stability and latencies. Thanks for Fireface users help. regards