Bluetooth keyboard not working after sleep *windows8* FIX

Its pretty simple actually.  It might not work for you, but let me know if it does.  Untill bootcamp drivers are updated, I found that disabling the Bluetooth Network adater under Networking And Sharing in the control panel will allow my Keyboard to function again after waking up.  If you find that your keyboard is still paired, but not responding when your Windows 8 install wakes up after sleep, this might fix the problem for now. 
If you have a notebook, I read on another forum that if you enable Bluetooth Collaboration under the device settings in Device Manager, you can fix this issue also.  Google for it if your interested. 

I've noticed on mine that if it is coming out of Ssafe Sleep (you can see the progress bar at the bottom of the screen if it is) then the keyboard does take a bit to active.
This may not be your problem however just be sure you've been patient enough after waking.

Similar Messages

  • Bluetooth keyboard not working after 10.7.2 update

    Just got around to installing the 10.7.2 update this morning, and afterwards could not connect my Apple bluetooth keyboard. I've also had some difficulty with my Apple mightymouse (yes, it's old, but I love it). I tried restarting with the keyboard and mouse off and trying to re-connect using the Bluetooth preferences, both SMC reset and PRAM reset, repairing disk permissions, and all of the suggestions on this thread: https://discussions.apple.com/message/16377827#16377827
    So far nothing has worked. My mouse began working again after the initial restart with both bluetooth devices off, but the keyboard isn't being detected in either the Keyboard setup or the Bluetooth setup assistance. The keyboard, however, was detected by my iPad, and was working with this computer before the update. I've made sure that the bluetooth on my iPad is off so as not to confuse it, and it's still not working.

    Well, I found a solution. After removing the bluetooth preferences as directed in this article (which didn't help me, but might somoeone else): http://ismashphone.com/2011/08/how-to-fix-bluetooth-pairing-in-mac-os-x-lion-iss ues.html
    There was a software update that fixed this. Thank goodness. So if like me you're just getting around to doing the update, after the big 10.7.2 one, check software update again. I assumed it would be all rolled in to the same update, but that was not the case.

  • Lenovo Yoga Tab 2 1051L. Bluetooth keyboard not working after WIN 10 upgrade

    Hello, Today upgradet my Lenovo Yoga Tab 2 1051L from win 8.1 to win 10 and bluetooth keyboard is not detecting any more. 1. Does any one already upgradet to win 10 on LeonovoYoga Tab 2 to win 10 ?2. Is anyone having similar issue ?3. Any suggestion at this point ?  Thank you in advance!

    I have yet to upgrade on my 1051.
    Looks like Lenovo uploaded new drivers for windows 10.
    http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051
    Have you update to these drivers?
    Looks like there is a bios update as well.
    Side note:
    I have upgraded to 10 on another tablet(stream 7)
    Once everything was updated and I gave it time to settle in I had no issues.

  • Bluetooth Keyboard not working on iMac after upgrading to 10.10.3

    I upgraded to Yosemite 10.10.3 and my bluetooth keyboard stopped working after a while. iMac (Late 2012) sees it but don't want to pair. You can see it on screenshot (never mind Russian interface).
    I tried everything:
    a) resetting PRAM
    b) resetting SMC
    c) turning bluetooth on/off
    d) changing assumes in keyboard
    etc, etc...
    Nothing helps. Can somebody help?

    HI Michelle
    i have the same problem Also using an iMac21 inch late 2012. Has been working perfectly until 10.10.3. Now when the iMac wakes from sleep neither the mouse or keyboard are connected. The only recourse is to force a hard restart with the power button.
    i have tried all your above items and also to no avail. I have set sleep to wait indefinitely & that has resolved my issue. Albeit with an increase in energy use.
    I Would be grateful if anybody had some tips on how to resolve this situation.
    thanks
    paul

  • T40 KEYBOARD NOT WORKING AFTER STARTUP

    IBM THINKPAD LAPTOP
    T40  237372M
    OS WINDOWS XP PRO SP3
    •86 key keyboard with imbedded numeric keypad and
    integrated UltraNav dual-pointing system, featuring TrackPoint and customized touch pad
    SUBJECT; KEYBOARD NOT WORKING
    AFTER STARTUP UNABLE TO OPEN SOFTWARE OR USE TEXT IN NOTEPAD AND OPENOFFICE
    I HAVE A TEMPORARY  SOLUTION TO OVERCOME THIS PROBLEM BY;
    1 )USING MOUSE OPEN START/ THEN  NOTEPAD
    STILL UNABLE TO ENTER TEXT
    2) OPEN START/ONSCREEN KEYBOARD CLICK ON LOCK THEN EXIT
    3)GO BACK TO NOTEPAD ENTER TEXT, NOW WORKING I THEN EXIT
    WITHOUT SAVING
    I TRIED REINSTALLING XP AND LOST MS WORD THAT IS WHY I AM USING OPEN OFFICE
    I THOUGHT IT MAY HAVE BEEN THE SP3 UPDATE BUT AFTER USING IBM SYS REINSTALL
    DURING RE INSTALL I WAS UNABLE TO USE TEXT FOR WINDOWS LOGIN
    THE ONLY KEYS TO USE WERE ÁÉÍÓÚ BEING LATIN CHARACTERS WITH ACUTE SIGN
    CAN ANYONE CAN HELP ME THANKS

    Hi and welcome to the forum!
    Does the keyboard work fine inside the BIOS?
    Also try booting from LiveCD of Ubuntu, if issue remains then the keyboard is faulty.
    Keep us informed.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Bluetooth keyboard not working.....power light flashes

    Hi everyone,
    My iMac bluetooth keyboard stopped working on the weekend. The green light adjacent the keyboard's power switch started flashing rather than staying on. I replaced the batteries but that didn't seem to help. My bluetooth mouse is working fine. Has this happened to anyone?
    Cheers,
    Jeremy

    Yes it has happened to me. Just added it to my long list of repairs. Do you have Applecare? In July, I had to have the logic board replaced. After the tech installed it, wham!!! Power supply was gone. Then it was the hard drive 3 weeks ago, after a few hundred bucks to get everything backed up then Lo-and-behold the keyboard over the last weekend. I called apple and then ran thru a few things. Like have you checked the batteries, try toggleing the on switch, unplug and replug it back in. After 10 minutes, the rep said "I can send you a new one." So if you do have Apple care, call and get a new keyboard. I just hope it is the keyboard and not the bluetooth.

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • HP SimplePass Reader Does not Work after Sleep

    I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
    I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
    Simple Pass version 6.0 (latest downloaded from HP.com)
    Envy Dv6 7229wm
    Windows 8 64-bit
    Thanks

    Hello hawvi,
    I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
    Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
    What operating system are you using?
    How long have you had the problem?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • USB Keyboard not working after running Monolingual

    Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
    In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance     ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
    I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
    Any help would be great!
    *feeling like a bone head*

    How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
    I suggest trying the following:
    0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
    1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
    2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
    3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

  • Bluetooth is not working after 4.3 update in zr

    After i updated my xperia zr to 4.3 the bluetooth is not working, it wont shows any blutooth devices and acnt able to pair.pls give me the solution immediatlly

    I do not know,you need to contact sony:
    http://www.sonymobile.com/global-en/support/contact-us/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • Keyboard not working after suspend to ram

    Hi,
    I have this problem since I have my notebook. Is a sony vaio cs.
    After suspend to ram the keyboard does't work.
    I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
    cat /var/log/pm-suspend.log:
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
    Module Size Used by
    i915 206216 1
    drm 190080 2 i915
    i2c_algo_bit 6996 1 i915
    joydev 13312 0
    snd_hda_codec_realtek 278132 1
    btusb 15364 0
    bluetooth 65668 1 btusb
    fan 5656 0
    uvcvideo 68316 0
    videodev 42048 1 uvcvideo
    v4l1_compat 18228 2 uvcvideo,videodev
    v4l2_compat_ioctl32 10992 1 videodev
    arc4 2192 2
    vboxdrv 1723308 0
    ecb 3536 2
    snd_seq_dummy 3540 0
    cpufreq_powersave 1872 2
    sdhci_pci 9200 0
    sdhci 20116 1 sdhci_pci
    snd_seq_oss 36224 0
    snd_hda_intel 31208 2
    snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
    iwlagn 108980 0
    snd_seq_midi_event 8592 1 snd_seq_oss
    snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
    cpufreq_ondemand 9256 0
    mmc_core 61984 1 sdhci
    snd_hwdep 9976 1 snd_hda_codec
    iwlcore 112976 1 iwlagn
    snd_pcm_oss 47328 0
    snd_mixer_oss 20976 1 snd_pcm_oss
    snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    mac80211 211296 2 iwlagn,iwlcore
    ohci1394 34180 0
    sony_laptop 35224 0
    psmouse 60404 0
    snd_timer 25344 2 snd_seq,snd_pcm
    uhci_hcd 27056 0
    ehci_hcd 40668 0
    i2c_i801 11632 0
    acpi_cpufreq 10272 0
    led_class 5112 2 sdhci,iwlcore
    battery 14072 0
    ieee1394 98880 1 ohci1394
    rfkill 13108 5 iwlcore,sony_laptop
    thermal 17712 0
    video 24268 1 i915
    output 3792 1 video
    serio_raw 7188 0
    snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 8576 1 snd
    snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
    cfg80211 78120 3 iwlagn,iwlcore,mac80211
    pcspkr 3088 0
    intel_agp 33104 1
    usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
    i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
    ac 5720 0
    sky2 56820 0
    button 7216 0
    sg 33824 0
    freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
    iTCO_wdt 13648 0
    iTCO_vendor_support 3828 1 iTCO_wdt
    evdev 12928 14
    processor 42064 3 acpi_cpufreq
    rtc_cmos 13592 0
    rtc_core 22212 1 rtc_cmos
    rtc_lib 3120 1 rtc_core
    ext4 256304 2
    mbcache 8980 1 ext4
    jbd2 69088 1 ext4
    crc16 2096 1 ext4
    sr_mod 19460 0
    sd_mod 30696 4
    cdrom 41288 1 sr_mod
    ahci 40992 3
    libata 192460 1 ahci
    scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 3907796 1913868 1993928 0 65068 1566872
    -/+ buffers/cache: 281928 3625868
    Swap: 2441872 0 2441872
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /etc/pm/sleep.d/99laptop-mode suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Thu Aug 13 22:39:50 UYT 2009: performing suspend
    Thu Aug 13 22:40:10 UYT 2009: Awake.
    Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    /etc/pm/sleep.d/99laptop-mode resume suspend: success.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
    /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
    Thu Aug 13 22:40:13 UYT 2009: Finished.
    Please ask me for more info if needed.

    I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
    After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
    EDIT: PS: Keyboard & Touchpad work fine after hibernate.
    cat /var/log/Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
    Build Date: 04 September 2009 03:37:03PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) Option "DontZap" "false"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0xec0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
    (--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "false"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
    (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
    (II) intel(0): Output VGA1 using monitor section Monitor0
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Disabled
    (WW) intel(0): Option "AccelMethod" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: Adding input device Sony Vaio Keys
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event5"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device UVC Camera (05ca:183f)
    (**) UVC Camera (05ca:183f): always reports core events
    (**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
    (II) UVC Camera (05ca:183f): Found keys
    (II) UVC Camera (05ca:183f): Configuring as keyboard
    (II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event8"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event13"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event7"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) intel(0): Allocate new frame buffer 1024x768 stride 1024
    (II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) config/hal: removing device AT Translated Set 2 keyboard
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device Sony Vaio Keys
    (II) Sony Vaio Keys: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device Sony Vaio Keys
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Raw Set 2 keyboard
    (**) AT Raw Set 2 keyboard: always reports core events
    (**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
    (II) AT Raw Set 2 keyboard: Found keys
    (II) AT Raw Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device AT Raw Set 2 keyboard
    (II) AT Raw Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event3"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    cat /var/log/kernel.log
    Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
    Oct 4 13:33:04 ArchTiger kernel: Back to C!
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
    Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
    Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
    Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
    Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
    Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
    Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
    Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
    Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
    Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
    Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
    Oct 4 13:33:04 ArchTiger kernel: done.
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
    Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
    Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
    Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
    Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
    Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
    Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
    Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
    Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
    Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
    Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
    Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
    Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
    cat /var/log/pm-suspend.log
    Initial commandline parameters:
    Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
    success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
    Module Size Used by
    sony_laptop 29520 0
    vboxdrv 134376 0
    ipv6 277876 14
    fuse 60896 2
    fan 4392 0
    msr 3240 0
    cpufreq_ondemand 7672 2
    acpi_cpufreq 8624 0
    freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
    snd_seq_dummy 2696 0
    snd_seq_oss 31168 0
    snd_seq_midi_event 7012 1 snd_seq_oss
    snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    arc4 1732 2
    ecb 2788 2
    iwlagn 95208 0
    sdhci_pci 7300 0
    sdhci 17128 1 sdhci_pci
    iwlcore 96132 1 iwlagn
    mac80211 182976 2 iwlagn,iwlcore
    snd_pcm_oss 40352 0
    ohci1394 30196 0
    mmc_core 52704 1 sdhci
    snd_mixer_oss 17540 1 snd_pcm_oss
    led_class 3976 2 sdhci,iwlcore
    ieee1394 85324 1 ohci1394
    battery 10984 0
    ac 4360 0
    cfg80211 67364 3 iwlagn,iwlcore,mac80211
    rfkill 10640 5 sony_laptop,iwlcore
    thermal 13888 0
    button 5556 0
    snd_hda_codec_realtek 206568 1
    snd_usb_audio 86304 3
    snd_usb_lib 17252 1 snd_usb_audio
    snd_rawmidi 21856 1 snd_usb_lib
    snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
    i915 184872 2
    processor 35864 3 acpi_cpufreq
    joydev 10400 0
    drm 154656 2 i915
    snd_hda_intel 26664 2
    snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
    snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
    snd_timer 21100 2 snd_seq,snd_pcm
    snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
    usbhid 40608 0
    hid 42496 1 usbhid
    i2c_algo_bit 5864 1 i915
    uvcvideo 61040 0
    videodev 36544 1 uvcvideo
    v4l1_compat 15688 2 uvcvideo,videodev
    video 19832 1 i915
    btusb 12632 0
    bluetooth 56676 1 btusb
    output 2884 1 video
    psmouse 59644 0
    i2c_i801 9656 0
    i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
    intel_agp 27484 1
    agpgart 32756 2 drm,intel_agp
    sg 27928 0
    iTCO_wdt 10952 0
    iTCO_vendor_support 3080 1 iTCO_wdt
    serio_raw 5704 0
    bridge 54008 0
    sky2 47240 0
    evdev 10176 19
    stp 2088 1 bridge
    llc 5552 2 bridge,stp
    tun 13572 0
    soundcore 6784 1 snd
    rtc_cmos 11212 0
    rtc_core 18048 1 rtc_cmos
    rtc_lib 2500 1 rtc_core
    ext3 134380 3
    jbd 48504 1 ext3
    mbcache 7080 1 ext3
    sr_mod 16612 0
    cdrom 36032 1 sr_mod
    sd_mod 27328 5
    uhci_hcd 23540 0
    ehci_hcd 36112 0
    usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
    ahci 34004 4
    libata 168044 1 ahci
    scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 2980024 2880848 99176 0 108764 2400148
    -/+ buffers/cache: 371936 2608088
    Swap: 1052216 0 1052216
    success.
    Let me know, if you need any other output.
    Thanks
    Last edited by Sir_Leon (2009-10-04 17:56:47)

  • Upgrade to Yosemite 10.10.3 bluetooth keyboard not working

    after the latest upgrade to Yosemite 10.10.3 some keys on my bluetooth keyboard are not working, any idea how to fix this?
    Example my "a" key does nothing, I can't get a ? and when I hold down shift to get a capital letter (example S) I get a lower case letter with an apostrophe like this s'

    A few other things you could try:
    1 - Try turning off and then back on both bluetooth and wifi, you will need wired mouse to achieve this.
    2 - Trying unplugging any peripheral devices and restart.
    3 - Boot into Safe Mode by holding down shift key and see if it works with minimal drivers and/or you could try booting into your Guest Account if you have one.
    4 - Reset your PRAM by starting your iMac and after start up sound hold down keys cmd, option, P, R until you hear the start up sound again.
    5 - Reset SMC by shutting down iMac, unplug power cord for 15sec, reconnect cord and wait 5sec then press the power button to start your iMac again.
    When you remade bluetooth keyboard connection did you delete the keyboard device under the bluetooth section of System Preferences, also bluetooth has a plist file in Macintosh HD/Library/Preferences - you could delete and restart the iMac (may need wired mouse again).
    All the ideas I have, someone else might have others, but your keyboard may be faulty so unless you could try a second unit I'm not sure what else to suggest.

  • Upgrade to mavericks 10.10.3  bluetooth keyboard not working

    after the latest upgrade to mavericks 10.10.3 some keys on my bluetooth keyboard are not working, any idea how to fix this

    I'll ask the hosts to move your post.
    Keyboard Keys Do Not Respond
    Keyboard/Mouse – Troubleshooting Wireless

  • Bluetooth Hardward not working after 10.5.5 Upgrade

    I have a 20' imac G5 (1.8 GHz). I installed 10.5.5 yesterday and after restarting my wireless keyboard wasnt working. I went to the preference panel and clicked on bluetooth but it wouldn't activate indicating that that hardware was no found. Has anyone else had this problem? How do I go back to 10.5.4? I am not using time machine. thanks

    I'm having similar problems.
    I use a noname USB dongle with my keyboard and cell phone.
    Being a USB dongle it can't be powered off, however this is what the menu bar item reports as its status after every restart. This is not the same status it reports when I actually remove the dongle (No Bluetooth device present).
    The method to turn it back on works through the Bluetooth File Exchange dialog worked for me, however I'm also experiencing some network issues with Bonjour, so just in case, here's what I did yesterday with my Mac:
    - Downloaded the Nokia 5310 iSync plugin from pyxx.org (worked).
    - Paired the phone (this added a new network interface, Bluetooth PAN IIRC, so this is why I think they could be related)
    Everything worked until last night until I put the computer to sleep. Today when it woke up, the BT module would report as off.
    Thanks

Maybe you are looking for

  • Mid 2010 MacBook Pro battery capacity at 89% with 64 cycles

    Hello everyone, I have a 13" mid 2010 MacBook Pro that I got around Christmas time. I downloaded coconutbattery a couple days ago and when i used it then My battery capacity had been 91%. So I thought that this was odd because of how new the computer

  • Vendor number range issue in BUCF transaction

    Hi, We are implementing the SRM 5.0 with Extended Classic scenario.  I my current SRM system is already connected with 3 SAP R/3 system and I am implementing and adding 4th SAP R/3 system. I am having an issue to replicating the vendor master from 4t

  • No accounting document posted in FI for ML81N

    Dear All Experts, I am having scenario for Services in MM. We create the Service PO --> then ML81N service entry sheet. Here the document is getting posted in MM but not getting posted in FI. I have maintained the GL accounts in BSX & WRX for service

  • Invoking WDJ from Custom WDA

    We have a requirement to Invoke Standard ESS WD Java components from a custom WD Abap component. We want to pass PERNR as a parameter to Standard WD J components and use them Basic idea is to give a Custom  WD A page to HR Support with an option to s

  • How do u make an account without a credit card?

    i tried to make a new one but the same thing keeps popping up. the opitions for payment has visa, master card, amex, discover as the payment method. NONE IS NOT AN OPTION ON THIS!!! WHAT DO I DOOOOOOOOOOOOO. I CALLED APPLE THEY TOLD ME TO EMAIL ITUNE