Bluetooth Keyboard response

Hello, I have a new mac mini and new wireless keyboard (white with the contoured keys - if that matters). When I come back to the Mac after a break the keyboard is very erratic and sluggish. Keys reeeepeat and there is a huge lag between key press and character on screen (1-10 seconds). The problem is fixed with a reboot, so I believe it is a mac mini issue...
Has anyone else experienced this and how do I go about fixing it? I'm now at a point where I must reboot every time I sit down to make the Keyboard function. The magic mouse works fine. The keyboard will keep working as long as I'm at the system, but something happens to the bluetooth - I think when the power save mode kicks on or the screen saver. (just a guess)
Ideas?

Hello j:
Welcome to Apple discussions.
Try a couple of things….. may not help, but cannot hurt.
Trash a preference file (com.apple.bluetooth.plist) and restart.
Reset the SMC:
http://discussions.apple.com/post!reply.jspa?messageID=12203016
If your mini is Intel-based, read the instructions later in the article.
Barry

Similar Messages

  • Can't type in iOS 8 notification response with Bluetooth keyboard

    When I receive a text message and tap on "Respond" in the notification, I am unable to type in dialog that pops up when my Bluetooth Keyboard.  Even if I bring up an on-screen keyboard, it still won't take any input.  When I turned Bluetooth off, I was able to respond in the dialog without a hitch.  This looks like an iOS 8 bug to me, but I figured I'd post here and see if anyone else is having a similar problem.

    I'm having the same issue.  Only place my bluetooth keyboard won't work.  Was hoping the update would fix it but, no

  • Can you create a keyboard short cut for the dictation mic with bluetooth keyboards? The multi-button requirement to open the onscreen is annoying and unintuitive.

    (Using an "iPad 3", i dont care what apple calls it) There should be a built in one button access to this from EVERY keyboard since this function is used to replace typing. An inherent Apple shortcut like copy and paste. I set my iPad up on a framed photo holder and use it like a moniter screen when I write, my Bluetooth keyboard is separated from it and makes writing comments and long articles less efficient because it requires extra steps with every dictation, while taking up screen space to have the on screen open. There needs to be a way to access dictation without the onscreen keyboard open, via any standard keyboard.

    I was "reasonably frustrated" for having more than one answer offered for a question that not only didn't I ask, but made it clear I was aware of the information it appears they cut and paste at me.
    I see it as: the title of my post should inform any person with an elementery handeling of the english language that I not only have this type of keyboard but am well aware it has a button for the ONSCREEN keyboard. That makes it look like they were just "approval hunting" #1. 2nd Grampa Joe's generic sounding response as a zero level newbie already who found "this" post where the first line is about keyboard shortcuts......WHEN there are better posts with more views and commets for exactly that. Approval hunting #2. I'd say based on both, my suspicion is darn reasonably justified sir.
    "couldn't find the answer he wanted" no sir, I didn't get an answer at all, they answered OTHER questions. Questions I didn't ask, even after having explained myself more clearly. If anyone is a Jerk, it's you for jumping to eronous conclusions and attacking me for them on personal level. I made a justified claim based on the BLACK AND WHITE TEXT, that it still appears to me is well supported, you just flung mud.........who's the jerk?
    Finally, your first post answered my question directly. Thank you. However under General/Keyboard, at the bottom you can make keyboard shortcuts. They may not function how I'm asking, but you can make them.

  • Macbook pro does not respond to bluetooth keyboard and mouse at login screen

    i've seen this question floating around and i don't think i've found one that has been resolved. i'm hoping someone may have an answer by now.
    i do not have this issue when i boot into windows 7 (bootcamp) the macbook pro responds to keyboard input and mouse input immediately on the windows 7 login screen. when i boot into mac, there is no response from either. i've seen suggestions of waiting for 30 secods. i still get nothing after waiting for over a minute.
    what i do right now is use the built-in touch pad and keyboard of the macbook pro to get past the login screen. once i'm logged in, i can see that the bluetooth devices are not yet connected (the three dots that go across the bluetooth symbol at the top right of the screen are not yet there). then after a while, maybe about half a minute, the bluetooth keyboard and mouse are connected and i can use them normally.
    it is not a big deal but it is very annoying.
    i am using a logitech bluetooth mouse (v740) and an adesso bluetooth keyboard (wkb-4000bm). i also tried an azio bluetooth keyboard and had the same issue. all these keyboards are made for mac.
    thannks in advance.

    just a correction, the keyboard and mouse don't always automatically reconnect once i'm logged in. most of the time i have to go click the bluetooth icon at the top right of my screen, select the mouse and then select "connect". i have to do the same to the keyboard.

  • Mac Mini first boot and bluetooth keyboard not recognised

    Hi Apple Support Community-
    I have just purchased a brand new Mac Mini and App Wireless Keyboard.  Unfortunately upon first boot, the Mac Mini is requesting I connect my bluetooth keyboard by switching it on, however even though the green light flashes, after the 5 second startup acknowledgement, there is no response from the Mac Mini.
    To confirm the keyboard is working, I have successfully paired it with my MacBook.  I do not have a USB Keyboard or Mouse and without purchasing additional hardware, do you have any suggestions to work around this problem?
    Thanks, Julian

    Hi Julian,
    Sometime a Mac can't pickup the connection of a bluetooth keyboard or mouse is normal. Whatever your Mac is brand new or not.
    I will do the following if the brand new Mac can't pickup the bluetooth connection, but make sure the bluetooth keyboard and mouse is not yet paired with other computer, that means you have to un-pair the keyboard and mouse from your MacBook before you perform the follow step:
    - Switch off the Mac
    - Switch off the Keyboard and Mouse which not yet paired with other computer, remove its battery, and re-install the battery after 10 seconds
    - Switch on the Keyboard and Mouse first, make sure both devices have a green light flashes (the light flashed at intervals, like a pulse **...**...sorry my poor English), that means the devices is discoverable.
    - Switch on the Mac asap if all the bluetooth keyboard and mouse is ready, and let the Mac pair both device (according the screen instruction)
    If the method still doesn't work, the worst case is: i'm afraid you have to connect wired keyboard and mouse to finish the Setup Assistant, and pair both bluetooth devices by Bluetooth Preferences. Once both bluetooth devices connected, disconnect wired keyboard and mouse.

  • Connecting Bluetooth Keyboard to N95?

    I have an N95 phone and have purchased a non nokia Bluetooth Keyboard (Xema)and I am having problems making it work? It pairs with the phone but then does not work? The seller suggests that you have to remove nokia sofware for their own keyboard, but my phone supplier and Nokia say that this is not possible? Can any one help with advice?

    It is up to manufacturers of 3rd party hardware to provide drivers to get their stuff to work on phones. It is not Nokia's responsibility. There's no way Nokia can be expected to provide drivers for all the hardware that's been designed by other manufacturers to work on their phones.
    BTW, "wineman" is an unusal user ID. I know someone in the East of France who uses it fairly frequently. If it's you then you can probably guess who I am from my user ID...
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Bluetooth keyboard lags 15 secs after application switching?

    Doesn't matter what bluetooth keyboard I use. Doesn't matter if I switch between apps by keyboard or mouse. Keyboard seems to remember all keystrokes, and spits them all out after 15 secs or so, but remains frozen until then. Computer fine in every other respect. Totally responsive to USB mouse interface while keyboard is down. Disk Utility checks out okay. Multiple restarts attempted. Can't trace the problem to the activity of a single application. Only thing new that happened recently was installation of Maverick, but I'm not even sure that's the issue.
    Help!!

    Great to hear, thanks & good luck!
    PS. I don't know how any 3rd parties can afford to keep up with Apple's changes my self.

  • Apple bluetooth Keyboard/mouse + gaming?

    Hello,
    I've been trying to find this info on the net but haven't been able to so far...
    Can anyone with Apple's bluetooth keyboard tell me if its response time is quick enough to make gaming possible?
    Thanks
    Loa

    Hello,
    Thanks for the input Martin. I'm not a hardcore gamer either, but I'd really hate to see some lag from the keyboard or mouse...
    2 quick questions: do you get any connection problems with either of them? And are there USB ports on the wireless keyboard?
    Thanks
    Loa

  • Keys are sticking on a bluetooth keyboard

    How do you take apart the wireless bluetooth keyboard to clean it? Some keys are sticking after it was cleaned.

    I used some commercial workstation/keyboard spray cleaner. Previous to that some coffee has been spilled on it. However, I was able to lift some keys up a little and that seems to have broken whatever was making it stick.
    I was wondering though, just in case something did happen that I needed to get into the keyboard, how I could take it apart.
    Thanks for the response.

  • After installing Mavericks, I have intermittent problems working with Wacom Intuos 4 and bluetooth keyboard.

    I use Photoshop extensively with a Wacom Intuos 4 and Apple bluetooth keyboard, and have had no problems (as below) before.
    Each time I use the tablet, the keyboard gets intermittently unresponsive, and it will only respond again after I tap the tablet pen on the tablet. And sometimes after repeatedly tapping the pen on the tablet.
    It gets so frustrating as I use the keyboard to change Photogshop tools etc, and everytime it doesn't response I have to do the tapping again.
    Appreciate some sharing of solutions, if any.
    Thank you.

    I'm having the same issue and its very frustrating.
    I use Photoshop and Flash heavily at work, but can't use my wacom at all anymore because:
    its seems Shift gets stuck and everything becomes highlighted
    shortcut keys won't work
    when I drag out rectangle shapes the corners automatically become curved and eventually my rectangle becomes a circle
    I will click on a keyframe and the actions panel will automatically pop up
    when I try to move objects they duplicate.
    More things happen but those are the ones I can think of off the top of my head. When I switch to a regular usb mouse the issues don't occur. I've tried uninstalling the driver and reinstalling and the issues still occur. Its completely slowed down my productivity and is starting to hurt my wrist now :\
    Nice to know that someone else has a similar problem at least. Hopefully apple or wacom will come out with a fix soon.

  • KeyRemap4MacBook with Bluetooth Keyboard?

    I'd like to remap some keys on both my MBP 13 10.6.4 laptop keyboard and my Apple Bluetooth keyboard to function as a number pad. I've downloaded KeyRemap4MacBook, and haven't installed it yet.
    I read on http://pqrs.org/macosx/keyremap4macbook/list.html --
    # Don't remap external keyboards
    # Don't remap Apple's keyboards
    So...is it possible to use KeyRemap4MacBook with the Apple Bluetooth keyboard without causing any problems?
    I've asked this question on the pqrs.org site but haven't received a response yet, and there's nothing on this subject over on the Bluetooth forum. Thanks for any help with this you can offer.

    I think you need to read a bit more deeply into the documentation for KeyRemap4MacBook. At the top of the page you've linked, I find the following apparent admonitions, two of which you've already quoted:
    •Don't remap an internal keyboard
    •Don't remap external keyboards
    •Don't remap Apple's keyboards
    •Don't remap keyboards which has third vendor's driver (Logitech, Microsoft, Kensington, ...)
    Thinking about these instructions for a moment, one quickly realizes that if these were instructions to the user, they would preclude the use of KR4M on any keyboard at all. That can't be what the software's developer intends.
    And it isn't. The page you've linked +is not a page of instructions to the user.+ It's a page listing 1036 different instructions that the user, at his or her option, can program into KR4M to govern its behavior. I've never used KR4M, but it is the most widely and often recommended keyboard remapping utility for use on Apple notebooks, and that certainly wouldn't be true if it didn't work on them, were dangerous to them, or caused the user to turn into a pumpkin or a pillar of salt. So go ahead and try it out, and if it works for you, use it in good health.

  • Bluetooth Keyboard K1280C not working on playbook

    I bought a bluetooth keyboard on ebay:
    http://www.ebay.com/itm/220982485208?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1851wt_13...
    It works on my PC, laptop and iphone, ipad. But not working on my lovely playbook
    it stucks at the pairing screen and tell me to enter the number on my keyboard.
    I enter the number and no response than
    I notice the combination of the number of playbook is "XXX XXX" (with a space between) while my PC iphone are just like"XXXXXXXX" (no space)
    Hope this device will be support in the next update. I think playbook still need to improve its buletooth compatitily, 

    >A USB keyboard works fine
    This is very useful information in order to find out whats wrong here.
    I agree with as***: its definitely an internal keyboard problem and keyboard replacement is the one and only solution.
    If the notebook is covered by warranty, get in contact with Toshiba authorized service provider in your country.
    The guys should be able to replace the keyboard free of charge.

  • Is there a plan to include autocorrect for bluetooth keyboards in future iOS updates?

    I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
    Is there a plan to fix this please?!

    shane.daley wrote:
    I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
    Is there a plan to fix this please?!
    Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software

  • My Apple Bluetooth keyboard has stopped working. The top row of keys works but the rest of the keys do not. I was carrying this in my computer bag without turning it off and that is when this started.

    My apple bluetooth keyboard has stopped working. The top row of keys works and the iPad sees the bluetooth keyboard (the bluetooth icon is active) but the other keys do not work. For the past coupld of days I have carried my keyboard in my computerbag without turning it off and I am thinking I have done something to make the letter keys to stop working. Two days in a row I did turn on the music as I carried the computer bag into work so I know that some keys were being activated.

    *UPDATE*
    I have been able to use the Zoom function to zoom in and the keys on the top row no longer are in the non-responsive strip of area.

  • TS3048 Bluetooth keyboard failure

    Same day failure of Bluetooth keyboard vs. IPad.
    After going through 3 sets of batteries, and verifying the failure with another "older" Bluetooth keyboard of the same make and model.
    Pushed the power button as I have hundreds of times prior.
    Green LED stays on for 4 seconds, then goes out never to return till I do it again, then the same exact response.
    Not sure what the failure is, but if I press and hold the power button, it will flag the process of pairing,  but it will not pair due to the lack of its ability to stay on for a sufficient amount of time.
    I suspect the segment that allows for the device (battery sense) detects insufficient battery life and thus drops it like yesterday's news paper.
    Please advise and thank you.

    Hello:
    Reset the SMC.
    If that does not help, take in back in for service.
    Barry

Maybe you are looking for

  • HT4623 my ipad 1 is not showing the update software tab?

    I am currently using 1st generation ipad and would like to update the software to ios 4.3 or higher. I am having issues finding the link; can someone help?

  • Getting not responding often doesnt last long but bugs me

    im on a cam site when i go to type in the chat sometimes i cant because it say not responding.deen doing it frequently doesnt last long but has been doing it a lot today. does same thing on facebook not responding

  • InfoPath 2010 digital signature error in SharePoint 2010 - Revocation Status cannot be verified

    Here is the issue: I have two servers, one a Test and one a Production. The Test server allows me to digitally sign the document and shows it correctly. In the Production environment, I used the same form and browser and it gives me the error: 'Revoc

  • PFAL : HRMD_A segments missing

    Dear All, I'm using tcode PFAL in order to create an Idoc HRMD_A07. The Idoc is well created but some segments are missing though they should contain some data. Those segments are E2P0028 (IT28) and E2P1000 (IT1000). Does anybody know how to get thos

  • Bdc for tocde CS01(BOM CREATION)

    Hi, I want to make a bdc for the tcode CS01(BOM Creation),but the thing when i perform the Recording then there is a point that the BOM having the sub - items which might be 3 or 2 or maybe 10 . how can i manage that during the recording. plzz provid