Bluetooth mic stopped working

I have a Blackberry Pearl 8220 phone. I've had the bluetooth paired etc successfully and have used it for months prior. All of a sudden Bluetooth's microphone stopped working. The caller on the other end is unable to hear me. I am able to hear the caller fine.
It is definitely a problem related to the phone because I have tried two bluetooth earpieces. Both of them showed the same symptom with Blackberry but worked on other phones. Hoping someone out thre can help.
Using BlackBerry 8220
v4.6.0.293 platform 4.1.0.100
Tried doing a battery pull a few times
Upgraded software using bb desktop manager

Hello,
I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
Soft reboot :
1) Hit the three following keys at the same time :
- Alt
- Right Shift
- Delete
2) wait 2 minutes for the Blackberry to wake up.
Hard reboot :
1) your Blackberry device is on
2) remove the battery and wait for a minute
3) Put the battery back
4) wait 5 minutes for the device to wake up.
Please tell us if it works for you.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

Satellite L300-2CL - built in mic stopped working

Hello
When I bought this computer (sep-09) everything was working fine. Then in march (I hade it idle for awhile), my built in mic stopped working.
Everything eles is working fina, and I have scanned the web for solutions, and tried to install new drivers, unistall them, boots everything possible, disabel and rebooting, but at most I just get a static sound from my test recordings.
I am using win 7 home pre, but the issues started when I was using Vista. Now I am out of ideas, and my friends on Skype grows tired of not hearing me.
Is there anything I can do to get the mic work, or should I just buy a headset?
Greatful for help
Hugo

Hi
Sounds a little bit like an mic hardware issue but you should also check the internal mic settings in control panel -> sound.
There you will see the Recording tab.
Here you should mark the internal mic and should check the properties.
Set all volume controllers to max.
Choose internal mic as standard device.
In Playback tab choose speakers -> properties.
There you will see the level tab. Here you should set the microphone to 100 and should check if its not disabled too.

Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success. Also, the bluetooth function stopped working.

Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success. Also, the bluetooth function stopped working.

Hi, EJ13.
I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps. There are a couple more steps I could recommend in the article below.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
Jason H.

Wine makes mic stop working.

A bit of a niche problem. But my mic stops working in linux apps when my wine game application is started. Closing the wine application makes the mic work again.
It's an inboard mic. I don't use the sound from the wine application so I don't need to preserve that functionallity. I just want my linux apps working.
My music programs work. (Output is fine just not input). And I couldn't see anything relevant in the wine configuration. If you need any more info just ask.
Tried in mumble skype teamspeak. It's all the same. Thanks.

Anybody?

Bluetooth keyboard stops working

My bluetooth keyboard stops working while I use Photoshop CS4. It happened 4 days ago. I called applecare and they asked that I take the keyboard into a dealer. Keypad worked at the dealer. Brought it home and it worked.
When I pair the keyboard to bluetooth the keyboard functions, but in all other applications it doesn't. I think it must be the computer an not the keyboard.
konabill

It's been a while but I am sure the issue lies with the bluetooth now. I did the SMC reset and the same issue only happened once since. This time I plugged in my logitech USB wireless mouse and it worked fine. I tried to disconnect my Apple bluetooth mouse and couldn't get it to connect again. I restarted the machine by clicking Apple->shut down->restart and when the computer restarted, neither the keyboard nor the mouse worked. I again used the Logitech wireless mouse to try to see my bluetooth setting. However I get the message of "bluetooth not available". I'm guessing my bluetooth unit in this new iMac isn't functioning properly. Any ideas or suggestions would be much appreciated.
Thanks

Bluetooth Mouse stops working after software updates

Hello,
I've been using a Bluetooth mouse with my X220 Tablet for several months now. After fiddling with device manager to ensure that the Thinkpad Bluetooth device does not have the "Allow the computer to turn off this device to save power" setting set, things were working perfectly.
However, after running through some windows & Lenovo updates, the mouse now seems to work for a while, but after any idle time, the mouse stops working. Turning the mouse off & back on seems to cause it to reconnect, and it works until the next time it goes idle for 2 minutes.
I've gone through device manager, and made sure both the Bluetooth & USB Root devices are set not to power down (per http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Bluetooth-mouse-stops-working-from-time-to-tim... ), but still no luck.
The software updates applied from the Lenovo System Update tool were:
ThinkPad Power Management Driver: 1.67.04.05
ThinkPad Power Manager: 6.64.4
Lenovo Solution Center: 2.4.002
Intel G1/G2 Display Driver: 9.17.10.3347
Also, some windows updates which don't seem related (mostly security), but I can lookup the list of KB numbers if helpful.
Are there any known issues with the power manager updates that might affect this? If so, what's the best way to revert to the last working version?
Thanks!

Try doing a PRAM reset and see if that helps, also put in new batteries as that may make a difference.
OS X Yosemite: Reset your computer’s PRAM

Bluetooth mouse stops working when adding a printer: 10.10.2

Hi,
I'm using a MacBook Pro 2012 Retina, upgraded to 10.10.2. Since upgrading to 10.10.2 I have been unable to connect to my Canon MG6150 that is plugged into the USB port of the Time Capsule (3TB). Those problems will be detailed in a separate post.
I have tried deleting the printer and creating a new printer and when I click on the + and get the window to select a printer, the bluetooth mouse stops working - the message comes up to show "Connection Lost". I have to select the printer manually and only when I have returned to the main Printer window in Settings & Preferences does the mouse connection work again.
Weird. Between this and not being able to set up the scanning features again (that used to work), I'm feeling underwhelmed...

sounds like an IRQ conflict. See if disabling plug and play in the bios solves it. Arch's kernel provides this already.

Yosemite - Bluetooth speaker stops working

I have an issue where my Bluetooth speaker stops working. It shows up on the devices list under Bluetooth but when I try to connect it does not do anything.
Rebooting fixes the problem. But then the next day when I try to use the speaker again it does not work.
This started happening with the upgrade to Yosemite.
Please advise, thanks,
OS X 10.10.1. MacBook Pro 15" Retina mid 2012

Scratch that. Things have improved in 10.10.2 - I am able to reconnect to the Bluetooth speaker more often, but it does sometimes fail and I have to reboot.

My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas?

My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas? Don't know if it's related to the upgrade. I see other complaints about bluetooth in the thread but none of the solutions offered there have worked for me.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

IPhone 5 mic stopped working

I got my iPhone 11.01 (2 days ago GTM +1) and 12.11 lately 5pm the mic stopped working.
It works when i record movie, and when using siri. But it does not work when i am trying to record voice, or trying to call someone.
Please help me

I had the same issue. I noticed people couldn't hear me when I called them over the phone all of a sudden one night. So I tested the microphone using the voice memo app to see if it was a hardware issue vs a carrier issue. Looks to be a hardware issue. HOWEVER, on incoming calls, the microphone seems to work fine. And after using another phone to call myself to test, my next outgoing call was fine! I think I might still run by the Apple Store and have someone look at it. Here's a video of the microphone not working even though it works fine again now.http://www.youtube.com/watch?v=y8iduofHMAk

Internal mic stopped working today, please help! C660 1F1

Hey guys,
My laptop is a Satellite C660 1F1, and it runs Windows 7, 64bit version.
This afternoon, my internal mic stopped working. It was just fine this morning. Yet I can still hear people on Skype perfectly.
I've checked all my settings, and according to them, everything is just fine. But it isn't. The little green bar that shows received sound doesn't move at all. It only moves a tiny bit when I tap the mic with my finger.
I've reinstalled drivers, I have my settings adjusted for maximum mic usage, but it's just not working.
I don't know what else to do, and this mic is the only way I can contact my family right now. Someone, please help me!

Satellite C660-1F1
This is the site for US computers. You''ll probably have better luck in these forums..
Toshiba Support Forums in Europe
-Jerry

Realtek Mic stopped working Please Help.

I'm on a Toshiba NB205-N325BN, Windows 7 Home Premium, Intel Atom processor N280 o 1.66GHz, 512KB L2 Cache, 667MHz FSB Mobile Intel® 945GSE Express Chipset. Audio Driver is a Realtek High Definition Audio driver version 6.0.1.5904
My internal mic stopped working. I'm not sure how long it hasn't been since I don't use it all the time, but when I went to use skype last night I found that the mic wouldn't work with anything even the sound recorder program in the accessories folder. I've tried uninstalling and reinstalling the driver, but to no success. I figured I give this forum ago to see if any one could help otherwise I'll have to call the Toshiba support line or do a clean install of windows (which I do not want to do at this time.)

I actually got in contact with Realtek's support via e-mail, and they sent me a program to install that will let them check their devices that are on the machine. After I ran the scan this is the conversation that we had:
Realtek: "We found you had plugged a external mic to microphone jack. Have you tried to unplug external mic and then check the built in mic ?"
Me: "I don't own an external mic, but I did plug in my headphones into the mic port by accident recently maybe that was it? I don't have anything plugged in right now and it's not working."
Realtek: "Please try to dump audio info again(run the scan again) during recording interanl mic sound."
After I ran the scan again they sent me these instructions, and I'm kind of confused on what he means (I think the support is in Asia somewhere and they are translating each message at a time.)
Realtek: "We tried to check it with TOSHIBA. Your machine supports audio prower download feature after audio idle status. You can try to turn off this function on the Power Manager Page of Realtek HD Audio Manageer. Or you can try to plug headphone jack to keep audio power up state .
Can anyone help me understand that last part? I went to the Audio Manager and I didn't see a Power Manager page anywhere! Does "Or you can try to plug headphone jack to keep audio power up state." Mean that it might start working if I try to use it with headphones?

Mic stopped working after upgrading RAM from 2G to 8G.

Windows 7 64-bit Ultimate
Proc: Core2 E6800
MB: EVGA NF68 (nvidia 680i chipset)
2Gb of RAM?
Audigy 2 ZS
EVGA 8800GTX
Upgraded my RAM to 8G, mic stopped working. Pulled 2 sticks(4Gb), works. Pushed 2 sticks, broken...
Found this post:
<a rel="nofollow" href="http://forums.techguy.org/windows-xp/877634-solved-windows-sound-recording-stopped.html"]http://forums.techguy.org/windows-xp/877634-solved-windows-sound-recording-stopped.html[/url]
Apparently I'm not the only one?
Seems like a pretty silly problem. Having a TOM address above 4Gb blow the driver's mind?

: No, you're not the only one. As you can see <a rel="nofollow" href="http://forums.creative.com/t5/Windows-7/Audigy-2-ZS-with-Windows-7-64-Bit-and-more-than-4GB-of-RAM/td-p/53795;jsessionid=A339FB657638D20C9FF346FC283A37]here[/url].

My Bluetooth has stopped working

Please help.
My bluetooth has stopped working, I have the bluetooth icon in the menu bar but when ever I go to turn it on it stays off. I have looked at my bluetooth preferences to try and pair my phone to it, when it prompts me to turn on bluetooth it still stays off and grayed out in the menu bar.
Is there a way that I can check if my bluetooth is still functioning on my macbook?
Thanks

Try resetting the PRAM as described here:
http://support.apple.com/kb/HT1379

Bluetooth suddenly stops working?

Has anyone had the issue where the factory Bluetooth suddenly stops working on the PowerMac G5?
My G5 (Dual 2 gig) has been working like a champ, and suddenly during use or when it is attempting to sleep, will seem to "lose" the computer. The computer in System Preferences can still see the bluetooth power levels, they appear to be paired, but moving the mouse and/or keyboard does nothing.
A reboot seems to be the only thing that clears it. The only recent addition was a wired USB camera cradle, and the problem did seem to start around then, but I don't know why that would impact Bluetooth. Any ideas?

The problem turned out to be a combination of RF and a hardware problem.

Bluetooth mic stopped working

Similar Messages

Maybe you are looking for