Bluetooth Mighty Mouse problem

I have a MacBook Pro, current with all software updates. I have an intermittent problem with the wireless mighty mouse (which also causes a problem with the trackpad button). The left mouse button stops working--the (secondary) right button and scroll button will work but it makes it terribly hard to select things...
If I turn off Bluetooth, the trackpad button resumes. Although I cannot reproduce this problem on demand, it happens several times a day.
I am not sure whether it is a software or hardware problem. Anyone with a similar experience?
MacBook Pro   Mac OS X (10.4.9)  

Weird. Call AppleCare.

Similar Messages

  • Bluetooth Mighty Mouse Problems - NO RIGHT CLICK.

    i tried dozens of times... i can't use the right click. it acts as a primary button even though i set it to secondary...
    is there another way of setting it so that it is secondary that i didn't do so that it would cause such a phenomenon?
    I NEED HELP. please.

    Alex,
    Do a search of this forum for "mighty mouse right button" or "mighty mouse secondary button." There are a number of problems it may be. The first thing to be sure is that you aren't touching the left button at all while you try to right click. The MM works via sensing whether a finger is on the right or left side of the mouse, and if you are touching the left button even slightly it will register as a primary click rather than a secondary.
    Second, there are also issues that have been reported with the BT MM losing the ability to sense that primary / secondary difference after some period of time. Replacing the mouse (sometimes needing to go through a few replacements) does seem to eventually fix that.
    If it doesn't seem to be an issue with contact on the sensor, I'd suggest returning the mouse and requesting a new one.
    Intel Mini 1.66 GHz, Mac Pro 2.66 GHz   Mac OS X (10.4.8)  
    Vista and XP running under Parallels

  • Bluetooth Mighty Mouse and Keyboard not working in Win XP!

    Hi All,
    I simply cannot get my Bluetooth Mighty Mouse and Keyboard to work in Win XP via Bootcamp! The bluetooth icon appears in the tray and even shows that they are connected but they do nothing at all. One thing to note is that they show up as connected but with no password. Could this be the problem? If I reconnected the two with new passcodes for XP, would they still work when I reboot in OSX?

    upgrading to vista sorted things out!

  • BT Mighty Mouse Problems

    My Bluetooth Mighty Mouse has had a number of issues in the past few days (since updating to 10.5.5). The battery percentage dropped from 67% to 22% during one days time. It took over two months to drop to 67%. Then the next day the batteries were entirely dead.
    I installed new AA batteries and found that within a day they were flat/dead. Now the MightyMouse won't respond even with a new set of batteries. The green light will flash, but no movement. At times it will even connect to the iMac, but will not move. Any help would be wonderful thanks.

    Hello TV:
    I suspect that the problem is with the mouse. Hopefully it is within the one year warranty period. If it is, either take it to an Apple store or call Applecare with a warranty issue.
    Barry

  • Bluetooth Mighty Mouse In Win XP Pro In Boot Camp

    I just went and bought a bluetooth mighty mouse for my macbook. On the mac side it works great, but when i go to pair it to the windows side (or any other windows machine) it can see it but it always asks me for a pin.
    does anyone have this problem or know what to do. I really wanna use this on the windows side of things too!!

    Works great for me using basic functions - left/right click and scroll wheel.
    I had first paired and named the mouse under OS X.
    I booted into Windows XP Pro/SP2. The BT drivers did not work. I uninstalled the Apple drivers by running the installer, rebooted, reinstalled, and rebooted.
    Note that you have to Ok unsigned drivers.
    One the second boot, a dialog showed the BT drivers being installed. After everything settled down, I opened the BT Control Panel and asked to add the driver.
    As soon as it started scanning, I pressed the right mouse button and turned the mouse on with the slide switch.
    It showed up within less than 5 secs. I selected it, and a dialog asked for a key assignment. I let the computer assign the key.
    Now it works like a charm, whether OS X or Windows is booted.
    This mouse is great - it works on all surfaces, and no more chord!

  • Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

    My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
    Can anyone suggest anything?
    Thanks.

    I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
    Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
    Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

  • Bluetooth Mighty Mouse & Windows XP using Bootcamp

    Are there plans to add functionality for the bluetooth mighty mouse in Windows XP using bootcamp??
    Macbook Pro   Mac OS X (10.4.7)   I run Bootcamp, as well as OS X

    I was able to get it to work in Windows XP. I was not using Boot Camp since I have a IBM ThinkPad T41p, but it should work the same.
    See my How to Setup Wireless Mighty Mouse with Windows XP post.
    Power Mac G5 Dual 2 GHz   Mac OS X (10.4.7)  

  • My Bluetooth Mighty Mouse has totally stopped working

    I have a bluetooth Mighty Mouse that seems to have stopped working. I was using it on a trip over in Guam. Then I came back to the states and it was in my suitcase/unused for several weeks with the batteries in it. Now that we have moved into an apartment, I would like to start using it again. But when I turn it on by sliding the little slider switch on the bottom, the little green light doesn't blink any more and it doesn't seem to be recognized by my computer. I have tried it with recharged batteries and other batteries, but no luck. Does anyone have a suggestion for me? I would really like to get this thing working without having to buy a new mouse. I have noticed that there is a little white tab just above where the batteries go. When the back cover is on, it appears that the slider switch somehow pushes on this little white tab. But with the cover off, this little white tab has some play in it (up and down) and can rattle around. Could there be something under this tab that is stuck down? Any advice would be appreciate! Thanks!

    Hello ba:
    No light=no power to the device.
    If you happen to be near an Apple store, take the mouse in and have them try it on one of their systems. I do not think there would be any charge for that.
    Barry

  • Bluetooth Mighty Mouse cursor isnt working, no red light.

    Hi today i got a bluetooth mighty mouse and set it up and put the battery in. The green light is turning on and the computer says its connected but the red light isnt working and not moving around the screen. The left and right click buttons are working.
    HELP!

    Have you tried pairing it again?
    And I would change the batteries no matter what it says

  • Bluetooth Mighty Mouse battery consumption

    I have a Bluetooth Mighty Mouse and have had it for 3 months (Christmas present). Last week, I noticed one bar had disappeared in the mouse battery life window in System Prefs - "wow" I thought "only lost 20% charge in just under 3 months".
    However, yesterday, I got a "Low Battery" warning and noticed that only two bars were remaining. A couple of hours later I got a "Critical battery level" warning and only one bar remaining.
    I don't use my mouse all that much - probably at most 6 hours per day (in short-ish intervals, turning it off in between) and I can't remember accidentally leaving it on. I'm using it with the two original AA batteries it shipped with.
    Is this normal battery consumption? I find it strange that from "Low battery" to "critical battery" would be a couple of hours and that it would suddenly lose almost 50% of its charge in a week.
    Do these mice eat AA batteries? Is it a good idea to get some rechargeables to use instead?
    Cheers for the help

    Hello thomasp:
    In answer to your question, the battery life of a wireless mouse is mostly dependent on usage. When not in use, the wireless devices go to a very low power mode. IMHO, it is a waste of time to turn mice/KBs off. I would postulate that your experience is about normal.
    I use rechargeable batteries (2500 mAh) in all my wireless devices. They do not last quite as long as the Lithium batteries - they have a lower voltage. However, I use an Energizer recharger that recharges batteries in 15 minutes - very little waiting time. In addition to being less expensive in the long run, rechargeable batteries are environmentally friendly! I bought a bunch of them on eBay. By the by, the rechargeables lose some charge every day - even if they are not in use.
    Barry

  • Bluetooth mighty mouse laggy

    Is it just me, or are wired mouses more responsive. I've had to stop using my bluetooth mighty mouse because there just seems to be too much of a delay between when I move the mouse and when the pointer moves on the screen. Anyone?

    I get the lag when there is a lot of network activity such as copying a file across the network or when Time Machine is activated.
    I've tried changing the channel on my AirPort Express and it has helped but on some channels the wireless connection itself is less stable and keeps dropping periodically.
    I've yet to find the channel that gives me both stable wireless and no laggy mouse.

  • Using Bluetooth Mighty Mouse

    I have a new Mac Pro and a Macbook Pro. Can I use the same bluetooth Mighty Mouse for both computers? I tried pairing it with the second mac after it was already paired and it stopped working with the first.
    Thanks!

    It can only be paired with one computer at a time.

  • Bluetooth Mighty Mouse connection

    I frequently use my MBP as a laptop. When I carry it out of range of the bluetooth Mighty Mouse, I get the notification that it has disconnected, but when I get back in range, the MBP acts as if it had never been connected to the mouse in the first place.
    I have to go through the whole setup routine to get the mouse to connect again. Is there any way to get the MBP to remember the mouse and connect automatically as soon as it's in range?
    Walt

    Wscrivens,
    Try this...
    Under "Bluetooth" select "devices," select your Bluetooth mouse and then "add to favorites."
    ~Steve

  • Keyboard & Mighty Mouse problems

    Hi all,
    I am using the new style keyboard with my MBP and for some reason I keep losing the bluetooth connection & the message " keyboard connection lost " the keyboard is next to my MBP so I cannot understand why I am getting this message ? Also when I receive this message my Mighty Mouse seems to move across the screen very slow ?
    If anyone has a clue why this is happening and could give me some help in solving this problem I would be very great full.
    Thanks Clinton

    Edit: You may want to ignore the below. I just realized it was pertaining to the Mac Pro, and not the MBP...
    Try reading through this thread and see if it helps:
    http://discussions.apple.com/thread.jspa?threadID=633522&tstart=0
    In a nutshell, it could be a Bluetooth-related wiring problem. Some people have gone and fixed the problem by opening up their machines and following the instructions here:
    http://www.thelocale.org/files/howtos/mac-pro-bluetooth-howto.pdf
    Since tampering with the innards of your computer will probably void your warranty, I would suggest that you NOT do this yourself unless you have to. If you're still under warranty, perhaps you could go to an Apple Store to get it looked at, showing them the above to sort of nudge them in the right direction...
    Message was edited by: roguemodron

  • Mighty Mouse: Problems with it everyday!

    Can someone please advise me on what to do with my new mighty mouse? I've had it for a couple of months now, and everyday it is affected by at least one of three functional glitches. These are:
    1. The click, scroll and side bars stop functioning (the movement sensor still functions)
    2. The index finger scroll pimple stop functioning in the up direction only (but not the down).
    3. The movement sensor becomes slow and jittery.
    I paid good money for this state of the art bluetooth device, and I expected more. I used a wireless mouse designed for a windows OS last year at it never had problems like this. (And it cost less than half the price!)
    I know if I take it back to the shop they will just take it away and test it and I'll be without a mouse for a few weeks, so what should I do? Is it faulty? Is this normal?

    This is not normal operation. You should have it checked out. This will help with the scroll ball not functioning in one direction.
    Apple: How to clean your Mighty Mouse

Maybe you are looking for

  • Ipod affected by podcast (air america DRM?)/firewaire error message

    I've had problems with one of two nano's in the house. The "firewire is not supported..." message without anything connected was the problem. The ipod was into Apple three times, each time they found nothing, and when I synced it back up to the origi

  • Link works in Flash 8 but it does not work in Dreamweaver

    I made a Flash swf file which contains button and ball. When I put mouse over the button, the ball jumps up. And also I have managed to attach a link to the button using action script. Strange thing is the link works fine when I use test movie with F

  • 0FIGL_O02 Init/Delta loading, Why more data ??

    Hi, We usually load the 0FIGL_O02 using the 0FI_GL_4 extractor in Full mode. Because of the very long loading time, we decided to use it in Delta mode instead, so we deleted all the data inside the DSO and we lunched the Init loading. The situation i

  • Custom Login Form Error

    Hello, after I implemented my Membership Provider and got it working i´m trying to implement the login form. After the process of user password validation is complented (Not done by membership provider, it only checks if user exists in DB) is complet

  • How can I sync Iphone 4G with the most updated iTune?

    I have updated everything and they just won't sync like they used to be. Aug. 3rd 2011 Thanks