Bluetooth Mighty Mouse - right click works for a while and then stops...

I recently bought a wireless Mighty Mouse, installed all the supplied software and paired it with my Macbook Pro. I've set up the right click as Secondary button and have been using it without any problems.
Then recently I've noticed that after using it for a while (in general applications like Aperture, Firefox etc), the right click will perform a Primary (left) click instead. Even if I take my hand completely off the mouse and click on the right side, it will perform a left click function. If I switch the Mighty Mouse off and back on, it starts to work normally again.
Is this a general issue with these mice? Or is mine just faulty? I can't see that it's a hardware fault as it returns to normal when I turn off/on the mouse. Any ideas?
Thanks in advance.

My new MacBook Pro and Wireless MM just arrived Friday and I spent Saturday transferring files from my PB G4 and installing Parallels/WinXP.
My Mighty Mouse worked fine initially, but then the Right Click (Secondary) reverted to Left Click (Primary). I reversed the settings to a "Left-handed" setup, the settings stuck. But the right button would not hold a Secondary setting.
I then paired the PB G4's Wireless Mighty Mouse (that I've had for several months) with the MacBook Pro - same issue surfaced. Both mice work consistently as represented with the PowerBook AND my IOGear bluetooth mouse works perfectly with both the PB and MBP (although the Mouse Preference Pane that comes up for the IOGear mouse is a reduced feature set that does not allow any additional button programning.)
I think it's a Preference Pane code issue. If the others who have posted here have ALSO installed Parallels, then the Parallels tools may be creating conflicts.
MacBook Pro Core 2 Duo 2.33 and just about everyting that came before it Mac OS X (10.4)

Similar Messages

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

I have a factory unlocked 4s I'm haveing trouble with the mms withI have a straight talk I'm useing the sim card swap with tmoblil sim card I'm following the insructions but it works for a while and then its gone. I've set the settings at least ten times

I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.

Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Multicast works for a day and then stops

I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons. It works consistently on 3 out of 6 WLAN's. And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing. I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC. 2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan. I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day. I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning. It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on. It started doing this after upgrading to 7.0.240.0. We have very little amount of multicast traffic on wireless, and low channel utilization. It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates. When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller. It shouldn't be wired config related since it's unicast mode. I've tried with and without broadcasting enabled. Any ideas?

Okay, so I discovered two things, but I still don't know what caused this problem. When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug. This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day. When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day. So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast.
What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power). This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again. Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those. I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again. Or maybe reboot after changing EAP-Broadcast Key interval.

Airport Express that works for I while and then quits

I have an airport express that I connect with an Ethernet wire to my wifi network base station to be able to extend the wifi to other areas of the house. It used to work perfectly and I had the green light on it for days and days on, in fact it never quit it could be on for weeks.
Now it works for a while, an hour or so, and then the light goes out completely (no orange light, just no light) and there is no longer any wifi communication. Is the Airport broken or could it have something to do with the originating wifi provider base station which is in fact hardwired to the the Express?

Now it works for a while, an hour or so, and then the light goes out completely (no orange light, just no light) and there is no longer any wifi communication.
Unfortunately, this is a sign that you are likely going to need to replace this Express.
Here is what I think is happening based on experience with these devices:
The internal components on the Express heat up significantly and after an hour or so, the heat build up is causing a weak electronic component to change in value, or heat expansion is causing a loss of an electrical connection at a tiny solder joint.
When the device cools down, it will work again for awhile, but the same pattern will likely repeat. Internal repairs on the Express are not really feasible since the labor costs will likely exceed the cost of a new Express.
If you are really handy with small electronic repairs and you have the time, you could carefully saw the case open along the center seam to open up the Express and take a look at connections and solder points. It 's unlikely that you will find something obvious, but might be worth a shot.

Downloaded adobephotoshop touch on ipad 2......worked for a while and then got frozen...can I pay of

downloaded photoshop touch on ipad 2....worked for a while...is now frozen can I pay for help service.....have been working for one hour trying to reach tech support

how can I get tech support in person

Exchange Admin Center 2013 SP1 worked for a day and then stopped working, possible OAB problems

Here is a problem that has me confused. On a fresh Windows Server 2012 R2, I installed Exchange 2013 SP1. It was successful and for the first day everything was working well. I then installed all security updates. The next day, I could no longer log in to
the Outlook Web App or Exchange Admin Center. I get the generic "something went wrong" message, and the only details are X-FEServer: LAKEVIEW-SERVER (our server name). Nothing else. In the event viewer, I have the logs below every time I try to log
in. This is repeatable. Every time I attempt to log in the same 3 things appear in the Application Log.
Event 1003, MSExchange Front End HTTP Proxy [Oab] An internal server error occurred. The unhandled exception was: System.Configuration.ConfigurationErrorsException: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Event 4999, MSExchange Common Watson report about to be sent for process id: 2460 (IIS Worker Process, w3wp.exe), with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangeOABAppPool, System.Web, S.W.C.HandlerFactoryCache.GetHandlerType,
S.Configuration.ConfigurationErrorsException, e0bc, 04.00.30319.34009. ErrorReportingEnabled: True
Event 1310, ASP.NET 4.0.30319.0 Event code: 3008 Event message: A configuration error has occurred. Event time: 5/8/2014 9:46:45 AM Event time (UTC): 5/8/2014 4:46:45 PM Event ID: 2c98a65728a7475db0212291e3934ab7
Event sequence: 19 Event occurrence: 9 Event detail code: 0 Application information:     Application domain: /LM/W3SVC/1/ROOT/OAB-1-130440407246522811     Trust level: Full     Application Virtual Path: /OAB
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\OAB\     Machine name: LAKEVIEW-SERVER Process information:     Process ID: 2460 (IIS Worker Process, w3wp.exe)
    Process name: w3wp.exe     Account name: NT AUTHORITY\SYSTEM Exception information:     Exception type: ConfigurationErrorsException     Exception message: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Request information:     Request URL: https://localhost:443/OAB/     Request path: /OAB/     User host address: ::1     User:     Is authenticated: False     Authentication
Type:     Thread account name: NT AUTHORITY\SYSTEM Thread information:     Thread ID: 18     Thread account name: NT AUTHORITY\SYSTEM     Is impersonating: False     Stack
trace:    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String type)
at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
My first guess is to reset the Outlook Address Book by using the Remove-OabVirtualDirectory Exchange commandlet. But I am not so sure this will work because Exchange worked for a day. Any help understanding what caused the problem (and thus help avoid it
happening again) and how to fix it are appreciated. Thanks.

hi,
If nothing works try resetting the Virtual Directories.
For owa
Open Exchange Management Shell (EMS), and then run the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication:
set-Owavirtualdirectory -identity "MBX\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false
-Formsauthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For ECP
Start Windows PowerShell.
Type the following commands, and then press Enter after each line:
Add-PSSnapin *exchange*
Set-EcpVirtualDirectory -Identity "MBX\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For Ref: http://technet.microsoft.com/en-us/library/bb123752(v=exchg.150).aspx
I did those commands. But remember, the original error I gave was related to the OAB virtual directory, not ECP or OWA. I also did the Remove-EcpVirtualDirectory, Remove-OabVirtualDirectory, and Remove-OwaVirtualDirectory commandlets and the corresponding
EcpVirtualDirectoryOabOwaVirtualDirecoty ones. I still cannot log in to the Exchange Admin Center. And I still have the same original generic unhelpful error message.
However, there are some changes. After I removed and re-added the virtual directories I no longer received the original error logs given above. I now get this log in the event viewer:
Event 2001, MSExchange Front End HTTP Proxy
[Owa] Failed to load SSL certificate.
The first logs I gave above always appeared after attempting to log in. This log that I gave appears infrequently and is not connected to any log in events. This log occurs only
after a similar log given below:
Event 1001, MSExchange Front End HTTP Proxy
[Owa] Application Starting.

My computer will work for a while and then it powers off.

I have a macbook pro. Just today I have had problems with it all of a sudden powering off and I have to restart it. When i do, it does it again. I have updated all of the updates but I have never had this problem and don't know what to do. Has this happened to anyone else?
Michelle

Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ

Swipe screen inoperative after a short while. I reboot and it will work for a while and then quit again

Swipe screen in operative after a short while. I reboot and after a while again it is inoperative. Anyone experienced that?
BB

Hello Bob4751777,
The article linked below details some useful information that can help resolve response issues with your iPhone's display.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
Cheers,
Allen

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

I am a new mac user and have a 15 macbook pro (non retina display). I am having an issue with safari "freezing" ...it will work fine for a while and then I will open a new tab and attempt a website that won't load and after that it seems no website will.

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can

If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple

Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur.

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

Troubleshooting Siri
http://support.apple.com/kb/TS4079

Bluetooth Mighty Mouse - right click works for a while and then stops...

Similar Messages

Maybe you are looking for