Bluetooth Motorola Razor - Sent multiple files.. Now only 1 at a time???

I have an IMAC and a Motorola Razor. The Bluetooth used to allow me to send multiple photo files at once and now it only lets me send one file at a time from any bluetooth enabled cell or smartphone. It worked as recent as Monday and I have tried other phones with the same result.
I am wondering if there is some setting on the IMAC that might have been set improperly on mistake. I have looked everywhere to see what may have happened. There does not seem to be any setting in Bluetooth settings which limit the number of files that can be sent. Also, it makes it really difficult if you have a large number of files to transfer.
Finally, I checked to see if this only applied to photos. It applies to any file that I try to send either to the IMAC or from the IMAC to my phone.
Can anyone help me?

https://discussions.apple.com/thread/3383532?tstart=0
Stefan

Similar Messages

  • How to sent multiple files

    Sir,
    i need to sent more one files to Server(deployed in TOMCAT) and recive respected files in server side, do separate the files and store it directory.
    1)Here My doubt is How to separate files using any boundry value?
    2)With out using SOAP is there any way to sent multiple payloads?
    3)server accept requests using HTTPS.
    please suggest what API's provide sent multiple payloads with boundry values in java.
    Thanks in advance.

    Is there any way put boundry between each file such that we can easily find it out.
    I checked with Java.Mail API's and i get confused bze
    Message msg = new MimeMessage(session);
    msg.setFrom(new InternetAddress(from));
    I am not create any session...and above purely for sent MAIL am i correct?

  • Creation of multiple files as per  segment repeating multple times  in IDOC

    Hi SapAll.
    i have got a  requirement where in an IDOC to File Interface pi need to create 3 different files with same content but with different names based on single Idoc-Segment.
    its an IDOC to 3 File Inteface.
    the file names will be determined by the IDOC-SEGMENT(Zregion)-Field (where Zregion Which will repeate for 3 times )
    for achiving this
    i just created 3 message (Service )Interfaces and one message mapping,3 Interface(Operation) mappings in the design and In the configuration i created three reciever communication channels with one reciever detarmination ,one Interface determination and 3 reciever agreements (with 3 communication channels 1 for each)
    in the Interface Determination i just defined 3 operation mappings,3 reciever Service Interfaces with one condition each.
    the condition is like below
    (/ZARTMAS05/IDOC/Z1EDRMDFRH_REGION01/REGION = JNB) then Rec Interface1
    (/ZARTMAS05/IDOC/Z1EDRMDFRH_REGION01/REGION = DBN) then Rec Interfacde2
    (/ZARTMAS05/IDOC/Z1EDRMDFRH_REGION01/REGION = CPT) then Rec Interface 3 where (/ZARTMAS05 is the sender idoc.
    but iam getting only one file in the reciever side instead of 3 files.
    can any body help me in providing me the differnt solutions for this without use of any script executions.
    will be waiitng for response.
    regards.
    Varma

    what ever you designed if you want to create always three files then your approach is correct.
    if you want create multiple files based on all the condition you you have to change the logic as like below.
    your message mapping sould me - one source target message type -> three traget message type all are occurance is 0..1
    and check the message type level contion if the region=ABCD create the first message type..
    same thing in your interface determination one source interface -> target three interface occrance is 0..1
    ID Steps - 1 RD, 1 ID, 3 Receiver coom channesl and 3 receiver aggreee...
    after develope this scenario it will split different message types in SXMb_MONI under the Technical Routing...payload level.
    hope it will help you to solve your requirement...
    Regards,
    Venu.

  • All attachments sent from work now only appear as winmail.dat

    This didn't happen in the past and now if I send any type of attachment from work (png or zip for instance), the attachment only appears as a winmail.dat file on both my MacBook Pro running 10.7.3 and my iPhone running iOS5.1
    The important thing here is the attachment is actually being set out correctly. I know this because if I pick it up using the web interface of my mail provider, the attachments are all present and correct.
    Therefore the problem lies somewhere in iOS5.1 or OS10.7.3
    Can anybody shed any light on this please?

    Because when Outlook sends emails in Transport Neutral Encapsulation Format(TNEF), this is a Microsoft proprietary format. Hence, every other email program sees them as Winmail.dat.
    In all versions of Outlook, you should be able to disable TNEF completely:
    On the "Tools" menu, click "Options", and then click the "Mail Format" tab.
    In the "Send in this message format" list, click "Plain Text" or "HTML", and then click "OK".
    Have you tried that?

  • CS 6 file now only opening in Cloud

    Today, I "accidentally" opened a CS 6 project file in Cloud, and am now getting a "this project appears to be damaged, it cannot be opened" error message when I attempt to open it in CS 6 (I do understand this is a backwards compatibility issue, but in the past, I have been prompted to create a new CC version of a project with a _1 appended to the name, and today, it just seemed to "happen" without those dialogue boxes appearing). I could continue the project in Cloud, but the problem is, I need to share this file with another editor who only has CS 6. Is there a way I can get us back on the same page, without him needing to upgrade to Cloud?
    Thank you!

    How exactly are you trying to open the project in CS6? Are you double-clicking the project file? Or launching CS6 and using the Open Project command?
    Nothing has changed in the way that CC and CC2014 operate when you load a project from an earlier version. That is, you should still be prompted to save the project to a new name (default "..._1"). I frequently test with old projects, and I'm always prompted to do the save-as. That's not to suggest that you haven't run into a problem that we don't know about but rather to just assure you that your current predicament is not the result of any intentional change in PPro's backward compatibility behavior.

  • Multiple files now open in addition to what I want.

    Hey all,
    I installed Lion when it came out (running MBP 2.2Ghz Intel Core 2 Duo) and now I have a strange (and annoying) issue.
    When I click on a file to open (whether its a picture through preview, file in powerpoint or sheet in excel) several files open in addition to the one selected. Files that I never wanted open now do so automatically which as you might imagine slows everything down. I have gone through and tried to find what magical setting is making this happen but I can't figure it out.
    Is anyone else having this issue?
    Any thoughts on correcting the

    Just close them before quitting.
    The expectation in Lion is that applications remember their state, so when they're reopened, they restore to their previous state, with whatever windows/documents/etc. that were open before it quit.
    So if you open 10 documents in, say, Preview, then quit and relaunch, those same 10 documents will reopen.
    This contrasts to previous OS versions where relaunching would start off fresh and you'd need to reopen those 10 documents if you wanted them.
    So, your solution should be as simple as closing the unneeded/wanted documents before quitting the app.
    If that doesn't work something else is amiss, but that's the likliest solution.

  • Moved file now only thumbnails

    i-Photo 6.
    Back in October, I moved my Pictures file over to my external hard drive to free up disc space on my PowerBook G4.
    To replace this, I created a new file: Home/i-Photo Nov 05. Everything worked fine. I have had two or more updates since then.
    However, a few days ago, after reading that the correct path should be:
    Home/Pictures/iPhotoLibrary
    I moved iPhoto Nov 05 back to to Home/Pictures/
    Now, when I click Library or any folder in my iPhoto, all I get is a grey screen with dotted lines where the thumbnails should be with the slide number under each dotted rectangle.
    I am tempted to move the file iPhoto Nov 05 out of Pictures/ and back to Home/iPhoto Nov 05 but I hesitate to do this in case I screw things up even more.
    I would appreciate some advice. Thank you.

    Hi blaxland,
    You can have your iPhoto in places other than the Pictures folder. Your problem is that you moved the library and you didn't tell iPhoto where you moved it.
    Hold down the Option key while launching iPhoto and keep it held down until you get a message screen. In that screen, choose to open another library and navigate to your library, highlight it and then click "open"
    Hopefully this will get your photos back.

  • HELP!  My .ai file now only opens as a pdf!

    Last week I finished my artwork and saved as usual as an .ai file.  I checked it again a few days ago, made a few amendments, and it was fine. Today I tried to open it but a box I have never seen before seems to think my document is a pdf and I get the option to open either 'image' or 'pages'.  I open pages and the artwork does not look such great resolution as it did previously.  How did this happen?  Anyone enlighten me.  Many thanks.
    OMG.  Working too late, I tried to open it in Photoshop not AI.  Ooops, nite nite

    Does it respond the same way if you use File>Open from within Illustrator? If it opens as an illustrator file, try doing a SaveAs and save it in a new place. If the new file works correctly, throw away the other.

  • Multiple embeds, play only one at a time?

    I'm working on page with CD track info and I want to have a small quicktime play button by each song that will play a 30 second sample. I've already done this by just embedding each mp3 sample into the xhtml page. The problem is, a person can click on multiple tracks and they'll all play at the same time. Is there any way to get (attribute or javascript?) so that when some clicks on a track, the previously clicked track that is still playing (if there is one) will stop first?
    I appreciate any help you can give me.

    I suggest you start here:
    http://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingJavaScript/aQTScripting_Javascro_AIntro/chapter_1_section1.html
    ...with the JavaScript API for QuickTime. I don't have an answer for you, but some of the attributes you are looking for are exposed to JavaScript. One trick is that to get the QuickTime plugin to do the heavy lifting for you, you need to insure that you are playing your clips in the QuickTime plugin (duh...). They may be MP3 files, but you might want to embed them in a .MOV container in order to make sure they don't get hijacked by some preferred audio player.
    Of course, if you do that, you could, I suppose, just use a QuickTime reference movie to link all the media files together into a single player...
    --Dave Althoff, Jr.

  • IPhone now only vibrating a few times?

    When I got a phone call, my iPhone 5 would vibrate until the call went to voicemail, or until I hit the lock button. Now it seems it is vibrating only a few times (I want to say four times) until it just stops vibrating - but the call is still going. I keep mistakenly thinking that they hung up! The text vibrates are working fine.
    Has this been an issue for anyone and how did you fix it? Thanks

    You can set different vibration patterns and lengths.
    If you go to Settings>Sounds and touch the "Vibration" setting you will see them.
    The default is "Alert" which I believe keeps vibrating until the call is answered or hung up.

  • Is there a way to rename multiple files in finder at the same time?

    for example, I have a group of pictures that I want to all start with the word "start" and be listed as "start1, start2, etc" Is this possible to do as a group versus having to individaully renaming every picture?

    There are some third-party renamers, or you can use an Automator Workflow.
    Start Automator and create a new Workflow.
    Drag in a Get Selected Finder Items Action.
    Drag in a Rename Finder Items Action. It will ask if you want to copy the items so that you don't alter the originals. Since you want to actually rename the originals, don't add that action.
    Set the parameters for the Rename. If you want to be able to reuse that workflow for different things, click the Options button and set it to show the action when the workflow runs. From your example, choose Make Sequential. Start with a new name and number it after the name.
    Save it so you can recall it when needed.
    Select your files and Run the workflow.
    You could also create it as a Service so that you can select files, then ctrl-click to select the workflow from the contextual menu. If you want that, set the Service to receive Files and Fodlers in the Finder.
    Skip step 1 (or delete it if you are converting it to a Service), but do the rest above. Save it with a short name so you can easily find it. It will appear in the Services submenu of the contextual menu.

  • Passcode lock - Now only offers ridiculously short times!

    I have just got to the bottom of why my iPhone keeps locking itself.
    Under 3.o and earlier versions of firmware you could set Pass lock on one hour or 4 hours which worked fine for me.
    However under 3. these options are gone and now the longest I an set it too is 15 minute.
    This is just plain stupid!
    Any ideas how to get the longer times back with out resorting to trying to go back t 3.0?
    Robin

    If you use an Exchange account, those restrictions may be imposed by the Exchange Administrator. You should check with your IT folks.
    "Additional device restrictions are now available, including the ability to specify the length of time that a device can be left unlocked, disable the camera, and prevent users from taking a screenshot of the device’s display." http://manuals.info.apple.com/enUS/Enterprise_DeploymentGuide.pdf

  • Download multiple files

    hi,all
    downloading files from server has been discussed for many times, i have known how to download one file after reading some older topics,but now i want to download
    multiple files,and I want browser prompt "Save As" only one time, then all the files would be downloaded to the same location,can anybody give me some advice?
    thanks & regards

    Hi,
    I don't think it sounds like what you're tyring to do would be possible for security reasons. I'd be quite worried if a browser was allowed to save multiple files after only asking once.
    I guess one solution would be to zip all the files up into one zip file (see JavaDocs for java.util.zip) and then transfer this zip file (this would also probably help with download times). This may not be the ideal solution for you though.

  • How to Open Multiple Files into One Image with a Format Plug-in?

    Basic overview question:
    I'm interested in creating a format plug-in that will open multiple image files and combine them, then provide one image to Photoshop for further work.
    1.  Can an .8bi plug-in receive notification of multiple files to be opened?  (Not unlike Camera Raw).  Or does one absolutely need to use an .8ba Import plug-in to do this?  I would prefer .8bi.
    2.  Assuming yes, could the latter parts of the plug-in interface be used to open just one combined image?
    Thanks!
    -Noel

    1) An import plugin (8bi) doesn't get file information - it has to provide it's own open dialog.  Only a file format plugin gets a file, but only one at a time.  (ACR has some special magic)
    You might want to take a look at the PhotoMerge and MergeToHDR setups with a script driving a plugin.

  • Attach multiple files to a List Item in SharePoint 2013

    Hi Guys,
    I have a customer that want to attach multiple files to single list item in a dialog box. like Datasheet View, if we set up a Datasheet View and click on the Attachment cell, it opens a dialog box that allow to select and attach multiple files as one operation. 
    Does anyone know how to solve this issue?
    As we know, if we want to attach multiple files, it only allow me to attach one file at a time, then repeat this process for every other file.
    Thanks in advance!
    Jodie

    Hi,
    According to your post, my understanding is that you wanted to upload multiple files in SharePoint list.
    There is no out of the box way to accomplish this with SharePoint.
    You can refer to the following articles to achieve it programmatically.
    Multiple Upload File Programmatically Using GridView:
    http://kamilamirul.wordpress.com/2013/01/19/multiple-upload-file-programmatically-using-gridview/
    Upload multiple files attached to a SharePoint list item.
    http://nestorrg-blogs.itequia.com/2010/01/upload-multiple-files-attached-to.html
    Programatically Upload Multiple File in SharePoint List
    http://social.technet.microsoft.com/wiki/contents/articles/2990.programatically-upload-multiple-file-in-sharepoint-list-part-2.aspx
    Programmatically uploading multiple files to Custom sharepoint list 
    http://www.c-sharpcorner.com/UploadFile/sarav82/MOSS11072007065009AM/MOSS.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for