Bluetooth mouse buttons do not respond but the mouse icon on the screen follows mouse movements.
Running 10.6.8 and replace my wireless mouse with a Microsoft 5000 Bluetooth. It works fine and then all of the suddon the left, right and wheel will not work. I replace with my usb apple mouse and it does the same. I also tried my old apple wireless mouse and it does the same thing. Can anyone shine some light on this issue. In order to fix I must reboot the computer.
I have test with my usb mouse and the same thing is happening as well. It usually happens when I click on an input field in chrome or safari.
Similar Messages
-
My ipad has stopped responding but the screen is still on. So i cant turn it off because i cant slide the red slider because of the screen not responding. Anysolution on this problem?
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
Hi, my MacBook keyboard letters are not responding but the numbers are
Hello, the keyboard letters on my MacBook are not responding but the numbers are. Any help much appreciated
Thank you, I did that and restarted. Now gives me a / instead of a ?
Any thoughts? Thanks again
Ed -
i tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?
it is not off but the screen still will not rotate
Well, if it's not off, that means it's on. So naturally it will still not roate. -
The wake-up/ sleep iPhone 5 botton does not work, but the serial number is out of list to recall from Apple. The problem is so similar the described in the article in the site. I want to repair in the program, like other iPhones, how it is possible?
Thanks.Then there isn't anything you can do about it then. Your only choice is to pay to have the device fixed or replaced. Apple is in charge of that, and as I said in the other thread, this is not Apple you are talking to, we are users like you and cannot do anything about that.
-
HT201401 My home button does not respond and the phone will not shut off
Has anyone had a similar problem where the phone will not shut off and the home button does not respond
You should try taking it to the Apple Store and asking for a replacement.
Or you could enable Assistive Touch from Settings>General>Accessibility. -
whenever i open the camera and click the buttons (in pic) the screen freezes and no picture is taken or video is made....Help please. I did try turning -the ipod off but nothing happened.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Plz Help: ipod buttons do not work, but the scrolling wheel work normally
Hi everyone,
All the controlling buttons on my girlfriend's ipod nano 3rd gen do not work.
However, the scrolling wheel is still functional.
Everything works, except the controlling buttons (menu, play, prev, next)
Is there any possible reason or solution for this?
The ipod is a 8GB product(RED) one.
Any suggestion is appreciated.
ThanksWelcome to the forums!
This sounds like a hardware problem to me. If it's under warranty, take it to an Apple store. If not, take it anyway. They still may be able to help. If they can't, you can try sending it away to a company that fixes iPods. However, this may cost more than it's worth. You may find yourself buying a new iPod. -
I have found 2 versions of my old bookmarks in my backed up data. One is under Owner/AppData/Local.../bookmarkbackup/bookmarks-2011-10-13 , etc. The other is under Firefox Profile/Cache/E7C5F7B4d01. I don't find these places in the new Firefox program just installed.
Have you tried to drag the folder that contains your music files. Locate the folder, while iTunes is open, drag the folder to the Library icon, this may help.
-
How do I fix this? I was just using my phone when it went black. The battery was at 48 % when it turned off. What could be the problem?
this happened to me and what i did was let it go flat and then charge it and it worked. i dont know if this will help but this is what i did when my phone went black.
-
I was powering down my ipad and suddenly the screen went completely black. I can power up and get Siri to respond but the screen remains black. I've tried syncing with Itunes but so far no luck. Any ideas how to fix this? One minute it was fine and then poof!
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.
It's not that you can't use the subject field, but it is very unreliable when I try to use it. Sometimes the message send button will work and sometimes it won't.
But the biggest reason to turn it off is so that you do not accidentally type your message in the subject field. You can type a subject in that field, but you still have to type the actual message in the space below the subject field. -
Links or buttons do not respond in Firefox but do respond in Internet Explorer
Sometimes and increasingly more often, links or buttons do not respond in Firefox, no new tab opens just nothing happens. But in Internet Explorer, the links or buttons respond normally and everything runs smoothly.
What is the cause then ?No answer yet ????
-
Magic Mouse "click" is not responding but cursor is tracking. Any thoughts?
Magic Mouse "click" is not responding but cursor is tracking. Any thoughts?
First check your settings. If all is as it should be, reset the PRAM.
http://support.apple.com/kb/PH14222?viewlocale=en_US
You may have to do this more than once. -
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.
Maybe you are looking for
-
Branch office WDS still pullinh image from main site
Hi, I'm trying to configure a WDS on our branch site. what i did was open a new folder named DeployFilesFromMaster on the branch office server and replicate the DeploymentShare from main to branch office using DFS. then i installed WDS services on th
-
Multicolored Wheel and iMac Frozen
Hi! I've bought a new iMac on May 2014. I've made a complete migration from my previous iMac with which I've never had any problem. My new iMac ( 21.5 " with 16Go RAM ) sometimes blocks completely after the Multicolored wheel appears. I never seen th
-
How do i find books in Danish..?
I am trying to find some specific books in Danish...they should be translated but, So fare no luck ? Where to look .?
-
Why permissions cannot be repaired?
i have tried over and over again to repair disk permissions for my 320 GB HD on a 2010 Mac mini i still get the same laundry lst
-
JITO1 show "cannot be executed"
Hi experts, We need to use JIT calls and I run JITO1. The error message return "transaction code JITO1 cannot be executed". I have checked SFW5 and enable enterprise_functions & enterprise_bussiness_functions. I found it's very strange. Sometimes I