Bluetooth mouse is not connected after reboot or bluez restart

I followed all possible guides to make my Apple MagicMouse. I saw on the forums that the key is to mark it as "trusted". I did it in bluetoothctl and put it to "trusts" file in /var/lib/bluetooth/xx:xx..../.
It works fine if I connect it manually but after restart I see only messages like this in bluetoothctl:
[NEW] Device 84:38:35:24:08:D9 MagicMouse
[CHG] Device 84:38:35:24:08:D9 Class: 0x002580
[CHG] Device 84:38:35:24:08:D9 Icon: input-mouse
[CHG] Device 84:38:35:24:08:D9 Connected: yes
[CHG] Device 84:38:35:24:08:D9 Connected: no
[ DEL] Device 84:38:35:24:08:D9 MagicMouse
[NEW] Device 84:38:35:24:08:D9 MagicMouse
[CHG] Device 84:38:35:24:08:D9 Class: 0x002580
[CHG] Device 84:38:35:24:08:D9 Icon: input-mouse
[CHG] Device 84:38:35:24:08:D9 Connected: yes
[CHG] Device 84:38:35:24:08:D9 Connected: no
[ DEL] Device 84:38:35:24:08:D9 MagicMouse
Messages are printed when I click a mouse button. There is a small delay between "Connected: yes" and "Connected: no" and during this time I see a bluetooth sign in the notification area (I have Gnome).
Sometimes I see a paring request from the mouse. Sometimes authorisation request and if I go to the bluetooth settings it even propose to type a PIN code on the mouse )
Regardless my action after restart of bluez I am at the starting point.

I mentioned that, because this "solution" used to work for me on previous similar problems. After these steps the mouse used to autoconnect again after reboots and wakeups. Then after some weeks the problem appeared again.
Now this also doesnt work anymore. Now, everytime the mouse is disconnected, I have to push  connect-button on the mouse and then manually initiate the connect process from the notebook (KDE: bluetooth applet -> Mouse -> Connect). It is not enough to just turn on the mouse.

Similar Messages

  • Bluetooth mouse does not connect after hibernate

    Mouse cklick 406S connecting with my macbook pro 15' OS Lion 10.7.2 (second half of 2011).
    After 5 minutes motionless mouse not connected.
    Also, if laptop reboot, it not connected too. I'm read most of the posts from this site, but have not found a solution.
    I need help. Thanks in advance.

    Hello!
    My preferences http://grrrab.it/er612u and advanced http://grrrab.it/m981gp

  • Targus bluetooth mouse will not connect in bootcamp

    I have a Targus blueetooth mouse that will not connect in bootcamp. It has worked fine for a long time in XP and 7. Then I upgraded the haddrive and had to do a lean install of Windows 7 and the Apple bootcamp 5. Now it will not connect at all. I have the "Apple Broadcom Built-in Bluetooth" seleted , it sees the mouse but it tries to connect and just stalls. This is very frustrating since without the mouse it is nearly impossible to troubleshoot Windows.

    Bluetooth mouse will not connect my wireless mouse...
    what works +every time+ for me :
    use your fingers to move the cursor up to the bluetooth icon (top right of display)
    click bluetooth icon, select user mouse / connect
    then quickly move the cursor up (with fingers) so it touches or is very close to the bluetooth icon
    and start clicking with your mouse (making sure the mouse is on obviously).
    I have NO idea why but this works on my MacBookPro everytime. If I try to connect without moving the cursor near the BT icon it won't connect (or takes at least 10 trys).

  • Mighty mouse won't connect after reboot

    Hi all,
    I updated my ~3 month old Mac Pro with the latest security update on 11/13/2009, and went home for the weekend. Returning on Monday 11/16/2009, I found that my mighty mouse would not connect to the Mac. I'd had intermittent connection issues previously, so I rebooted to no avail. Investigating further, I found that if I click on the Bluetooth menu and select the mighty mouse and click Connect, the Bluetooth icon flashes to connected briefly then back to unconnected. I can repeat this ad nauseum with no success. If I go into Mouse preferences and select Set Up Bluetooth Mouse, and then turn the mighty mouse off and then on to initiate pairing, the setup window will find the mouse. I then click Continue and it attempts to connect, but on the first try it always fails. If I then repeat the discovery and connection process again, it will pair successfully. After that the mouse works normally. However if I reboot my machine, the pairing is lost when Mac OS comes back up. This always happens with the mighty mouse, and maybe 50% of the time when I perform the same procedure with my wireless keyboard. I then have to go through the semi-successful pairing process again. I've tried various fixes including deleting the com.apple.Bluetooth.plist and rebooting, but nothing has solved this. This also happens if I try to use a magic mouse I bought for my Macbook Pro on the Mac Pro. I haven't had any bluetooth problems on the laptop.
    This was addressed in another post but the original user marked it as answered after Apple had him pair the mouse with another computer and then with the first. Tried that too, doesn't work for me.
    Ted

    Hello d:
    Try making the BT devices "favorites."
    Go to system preferences>bluetooth. Highlight the device. Click on the little gear and "show more info." Click on the gear again and make the device a favorite.
    Barry

  • Bluetooth keyboard will not connect after upgrading to 10.9.2

    I upgraded mavericks to 10.9.2 bluetooth keyboard will not connect my blutooth mouse will connect my trackpad will connect but not my keyboard. Keeps saying it cannot pair . I reset the VRAM and keyboard  still will not connect

    Tried all of the below and nothing is working.
    Apple Support: Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048

  • Bluetooth Mouse can not connect...

    Hi All, I am aware this is an issue however can not figure out how to resolve it. I have a 2007 macbook 2.16 dual core I'm using a bluetooth mouse which works perfectly with Mac OSX Lion. However when I switch to Bootcamp running Windows 7 64 bit, the mouse can not connect. The computer will find the mouse but when I click on the mouse icon in the bluetooth setup to continue installation the circle spins and spins and says connecting to device and nothing happens. The mouse works and bluetooth works, but not in bootcamp. I am tech savy so hit me with your best shot. Thank you!!

    Vnahaze2000, I still haven't figured out the problem. Try this website, it's from apple. There are drivers you can install which will hopefully alleviate your problem. I downloaded every driver and unfortunatelly no luck. But maybe it will help you. http://support.apple.com/downloads/#macoscomponents      Good luck!!

  • Bluetooth mouse does not connect

    Surface Pro 2; Win 8.1
    Built-in Bluetooth
    I am attempting to connect a Bluetooth mouse to the surface when working at my desk. I have Bluetooth turn on and it keeps scrolling ... searching.
    I have 2 Bluetooth mice that I am trying to get to connect:
    1. Verbatim model 96991 (no transceiver)
    2. Microsoft wireless mobile 3500 (with transceiver). I loaded Microsoft Mouse & Keyboard center. When run, cannot find device. I did not connect the transceiver because I want the internal stack to work.
    I wish to use internal surface Bluetooth stack.
    What do I do to get MS mouse working on surface 2 Pro win 8.1 with internal Bluetooth stack (no transceiver) 
    John Lenz

    MS Bluetooth mouse (w/USB) will not connect natively to Surface2 PRO.
    Another Bluetooth mouse (no USB) does but does not sustain connection. I'll use this one.
    John Lenz

  • My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!

    My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

    My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

  • Bluetooth keyboard and mouse will not connect

    I loaded a linux iso on a usb. Loaded it on a reboot. It may have been corrupted or something, because it did not load correctly. I rebooted the computer again and now the bluetooth keyboard and mouse will not connect. How can I fix this?
    Thank you.
    Ryan

    Hello:
    These are knowledge base articles:
    Reset PRAM:
    http://support.apple.com/kb/PH4405
    Reset SMC:
    http://support.apple.com/kb/HT3964
    Those may or may not help, but they will not hurt anything.
    Barry

  • In Macpro mid 2010 system, after updating 10.7.5 bluetooth mouse does not work

    After System updating bluetooth mouse is not working ,please give the suggetion.

    My suggestion is please post in the correct forum, this is a forum for iMac's. The Mac Pro forum is listed at:
    https://discussions.apple.com/community/desktop_computers/mac_pro

  • Microsoft Designer Bluetooth Mouse is not detected in 10.10.3

    Microsoft Designer Bluetooth Mouse is not getting detected as a bluetooth mouse on OSX 10.10.3. During pairing, it just shows up as a bluetoth device and after some time, there is a popup that no mouse is connected. Also, when you try to add the mouse though Mouse->Add a Bluetooth Mouse screen, the mouse is not gettng detected.
    But the mouse works once its paired, but its not seen as a Mouse by OSX. Its just being detected as a generic bluetooth device.

    Its listed in the data sheet for the product. But the microsoft site does not show the same in compatibility list

  • Windows 8.1 and Apple Bluetooth Mouse and Keyboard connection

    I recently upgraded to Windows 8.1 from Windows 8.0 Home and as a result I'm experiencing the following problems:
    Apple Bluetooth Mouse - randomly dis/connects or freezes where I cannot move the mouse or it's very jerky or very slow.
    Apple Bluetooth Keyboard - the keys will stick or freeze causing the redundent key presses (eg. yyyyyyyyeeeeeee).
    I've done the following to fix the problem with no success:
    Reinstall Boot Camp 5.0.5033 drivers
    Reinstalled Bluetooth drivers from Boot Camp 5.0.533 individually
    Unistalled both devices on OS X and reinstall them only on Windows 8.1
    Reinstalling both on OS X and reinstalling them on Windows 8.1
    Uninstalling all the drivers from the Device Manager and reinstalling them
    One thing I have noticed is that under Devices and Printers I have two new devices (HID-compliant mouse and HID Keyboard Device) that were not there under Windows 8.0 in addition to my bluetooth devices.  I have tried removing the new devices but they keep reinstalling themselves.
    I have USB mouse that's connected and I've been able to use that without problems so I think there's a problem with the Apple driver or the Windows 8.1 bluetooth drivers.
    Has anyone fixed this?
    Thanks!

    Just to point out the "Bluetooth Collaboration" setting I've found this:
    Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.
    And it is not enabled by default on some devices like on mine!
    http://chasms.com/wireless_utilities/broadcom/props.htm#toc_51

  • Bluetooth mouse won't pair after recent os updates

    Hi there,
    Since I installed the two updates for snow leopard yesterday my bluetooth mouse will not pair.
    I go to setup bluetooth device & when i press the button to make it discoverable it appears right
    away so I click contnue & after a short while get the error message 'The pairing attempt was
    unsuccessful. This configuration of Mac OSX & bluetooth software could be invalid or unsupported'.
    On the initial discovery screen the messages 'searching for devices - one found' then 'updating 1
    device name' appear. Have just tried pairing it on another windows system & it works fine!
    Any advice appreciated.

    If using a 3rd party mouse, check with its manufacturer to determine if they have compatible drivers.
    If using Apple's mouse, post in the Mouse Bluetooth forum area.

  • IOS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this.

    OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.

    I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
    While my solution wasn't ideal
    1) It was what Apple told me to do!
    2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
    I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...)

  • Could Calendar services not available after reboot be LDAP problem?

    I followed this installation guide:
    https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
    I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
    However, when I reboot the server, Calendar service is unavailable.
    Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
    I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
    cd /opt/sun/directory/bin
    ./dsadm create /var/opt/sun/directory/dsins1
    ./dsconf create-suffix "0=isp"
    Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
    Then, I ended up running to get it set up:
    ./dsccsetup ads-create
    ./dsccsetup war-file-create
    $ ./dsccsetup cacao-reg
    ./dsccsetup status
    Then, it looked like the dcss agent is registered in cacao.
    So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
    cd /opt/sun/directory/bin
    ./dsadmin stop-domain domain1
    ./dsadmin start-domain domain1
    However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
    The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
    https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
    I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
    After reboot, I run these commands to get the server up and running:
    Start GlassFish server:
    cd /opt/sun/SUNWappserver/bin
    ./startserv
    Start web ( Messaging Server I think ):
    cd /opt/sun/comms/messaging64/bin
    ./start-msg
    Start LDAP ( Directory Server )
    cd /opt/sun/directory/bin
    ./dsadm start /var/opt/sun/directory/dsins1
    Start Mysql
    cd/etc/init.d
    ./mysqld start
    All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
    So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
    ( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
    Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
    Some of my steps were out of order. Cleaned them up so it is easier to understand.

    Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
    =========================
    Last packet sent to the server was 0 ms ago.
    SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
    INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
    INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend>      JDBC JNDI Name = jdbc/ischedulebackend
    SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.
    SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
    INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
    WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
    SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
    SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
    WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
    ======================
    Does that look like an LDAP issue to you?
    "Fatal Error: All LDAP servers are down."
    Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
    Changed one server address

Maybe you are looking for