Bluetooth mouse N6901 NEEDS a firmware update

I'm on my second of these mice after having the first one replaced for double-clicking on a single click, and not a month in the new unit is doing this as well. Isn't lenovo for professionals, those that do? How can professionals put up with a problem like this?
This would be one of the best mice I've used if not for thatt and its super sensitivity.

Can you go into Search>Folder Options>and make sure" Single click to open an item" is not checked?
If that doesn't help, go into Control Panel>Hardware and Sound>Devices and Printers>Mouse and under the Button tab, try adjusting the click speed. Go into the Hardware tab>Properties and click Update driver.
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

Similar Messages

*** E51 GREAT PHONE BUT NEED A FIRMWARE UPDATE... ...

Hi
TO THE NOKIA FIRMWARE UPDATE STAFF:
I bought that great phone NOKIA E51 but it needs a FIRMWARE UPDATE because the built'in camera gives photo(and videos too!) in VERY VERY "green" color that's too bad (MY OLD 6630 , so only 1,3 megapixel is best in photo quality against my actually E51..!)
*** SO PLEASE REMOVE THE GREEN COLOR TENDENCY IN THE PHOTO! ***
ANOTHER AND LAST problem I have noticed during mine along E51 testing is the integrate REAL PLAYER VERSION has VERY VERY big problems during *MP4* VIDEO PLAYBACK (MP4 VIDEOS MADE ON PURPOSE FOR MOBILE), VIDEO APPEARS In jerks (ESPECIALLY IN FULL SCREEN!) And SOME TIME IT BLOCKS DURING PLAYBACK!
*** SO PLEASE A NEW VERSION OF REAL PLAYER IN THE NEXT E51 FIRMWARE ***
FOR ALL THE REST THE E51 PHONE IS GREAT AND PRICE TOO (200€ IN ITALY), I BELIVE IT'LL BE A BEST SELLER -BUT- ONLY IF THE PROBLEMS I LISTED ABOVE WILL BE CORRECTED!!
i got latest firmware version: 100.34.20

Hi,
I wrote to Nokia regarding this issue using the Nokia India site, and the Nokia for Business site. I also sent an email to [email protected]
Here is the text of the email:
Hi,
I bought my Nokia E51 four days back, and I am VERY happy with the
phone. However, I feel that there are some shortcomings with the
phone, which need to be addressed by firmware upgrades. I am listing
them here:
1) The camera has a VERY noticeable green tint
2) The video playback in full screen mode using RealPlayer is VERY
slow and choppy
3) In the "Missed Calls" part of the call log, there is NO way to
determine WHICH number of the contact was the call missed - "Mobile
Number", "Tel.(home)", "Tel.(office)" or what? The only way to
determine is to call back using the same screen, which is VERY
counterintuitive!
You can have a look at some more people agreeing with me here -
/discussions/board/message?board.id=communicators&thread.id=14028
and the problem 3) described in detail here -
/discussions/board/message?board.id=communicators&thread.id=15956
Apart from these 3 problems, I am VERY VERY happy with the E51 - it
lives up to all the promises it makes! Way to go, Nokia! I request you
to address those 3 issues as fast as possible!
Thanks and regards,
I request ALL other users of the phone to please contact Nokia similarly, to have these issues resolved ASAP. If someone can suggest more ways of contacting Nokia regarding this issue, please tell me! Thanks!

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

You do not want EFI 2.2, it bricked many 2011 MacBook Pro machines.
EFI 2.3 is the fix. Software Update should install it if you need it, but it goes to the boot drive as that's where the hidden EFI resides.
Check out this link of machines and their EFI versions
https://support.apple.com/kb/HT1237
Also if your SSD should be in the hard drive bay as it makes a better boot/applicaitions drive, not a good storage drive as it wears out with repeated use and is not "scrubbable" like a regular hard drive
The hard drive should be in the optical bay and used as a storage drive, you have things all messed up inside your machine, Apple doesn't support or expect the optical drive to be used as such to begin with, then as a boot drive is just asking for trouble. So use the optical bay as storage and not as a boot bay.
Also you can't install OS X or Windows or use a Firmware restore disk because it only works from a internal optical drive, which you have removed.
https://support.apple.com/kb/HT2213
You need to learn all about cloning etc., as you have no other means to boot the machine.
https://discussions.apple.com/message/16276201#16276201

Third party routers that need no firmware update

What are the best third party WiFi routers with LAN ethernet ports that need no firmware update to work with 10.4.8 and Windows XP?

Actually the extra ethernet ports is paramount.
Otherwise you don't know who is being secure to
whom. You end up having two routers to setup for
configuration of security. Simplicity is
important, since I want to be able to help set it up
for the friend, and forget it.
?? That doesn't make any sense - I think you're missing something fundemental here. The extra ethernet ports are on the LAN side of the secure connection. The firewall in the router isolates the internal, LAN network (wireless + ethernet) from the external WAN (aka the big bad internet). Whether or not you have a switch attached to one of the LAN ports makes no difference, security-wise - you are in control of the devices connected to the LAN side of the router. WEP/WPA/WPA2 security controls who is able to connect to the wireless LAN.
From a security standpoint, there is ABSOLUTELY no difference between buying a router with eight lan ports and buying a router with four lan ports plus plugging in a five-port switch to one of the lan ports. It's exactly the same thing.
What you don't control is the WAN side of things - the internet itself. You certainly wouldn't want to connect the switch to the WAN port on the router, at least not unless you wanted to run, say, a web server that is exposed to the internet itself. This wouldn't be a good idea in any case - there are better ways to set this up as well (either by setting up a DMZ, or by setting up port forwards)
There is absolutely no reason why you would want or need two routers for this setup - this is only an issue for extremely large networks.
The WRT54G has 1 WAN port and four LAN ports. You can have four hardwired devices (computers, printers, switches, etc) on these LAN ports - they are protected from the internet by the firewall in the router. You can also have any number of wireless devices on this same router; these, as well, are on the LAN side of the router, and are therefore protected.
Adding a switch to the LAN side of the router has absolutely no impact on security. No additional routers would be required.

D-Link DBT-120 USB adapter needs new firmware update from Apple

I purchased a new DBT-120 USB/Bluetooth adapter for use with my iBook (Clamshell). unfortunately, it's not allowing connections to headsets as I intended.
I have a DBT-120 B1 at home which works fine with my headset but that adapter worked only after updating the firmware with Apple's updater.
unfortunately, the firmware updater will not recognise my new DBT-120 which is a C1.
Apple, please update the firmware updater for the new C1... soon!
has anyone else written a firmware updater for the DBT-120 adapters so that headsets can be used with OS X?
regards,
Gregory

I have the same problem w/ my DBT-120 v. C1
I tried installing bluetooth firmware 1.2 and Bluetooth Firmware Updater gives me the error:
"This Bluetooth device is not supported
This computer does not have an Apple Bluetooth module installed. It cannot be updated by this application."
I also tried installing version 1.2.1 but during installation that gave me the error: "This update is not needed on this computer."
I have an iMac Intel Core 1 Duo 17" that will hopefully support the headset when it finishes charging, but I would like to be able to use it on the go too.
iBook G4 14 1.2GHz, 512MB Mac OS X (10.4.8)

MacMice "The Mouse BT" disabled after Firmware update

I tried the firmware update and lost connection to my MacMice "The Mouse BT." As others said, the updatge never seemed to complete.
I changed the batteries in The Mouse BT. They were old anyway. Still no connection. Going with a previous topic, I reset PRAM (command-option-p-r) and regained the MouseBT. But later --- not sure if it was a logout or restart, I lost connection to MouseBT and have been unable to get it back.
Resetting PRAM has not fixed this since.
My BT preference pane does identify the mouse as
Paired: yes
Configured: yes
Favorite: yes
Connected: no
When I turn over MouseBT I can see the red optical light while touching the scrollwheel. Help!

This question is NOT answered!
The update blew my Bluetooth away. Mouse & KB not recognized properly. Got a wired kb & mouse. Still not perfect. Bluetooth gone from system. Called support. Eneded up dropping my G5 off at Apple yesterday for a new board! Covered service but no computer for 7 - 10 days!
Apple??
Cheers,
Frank
iMac G5 Mac OS X (10.4.3)

Advice needed on firmware update-

Hi everyone… I have successfully replaced the HD on my kid’s imac G3 [yay!] but the [secondhand] disk is running a very old version of OS X [10.0.4, I think…]. Can anyone let me know if I need to carry out any firmware updates before installing Tiger? I’d be so grateful for your advice… many thanks!

Hello,
If you need firmware updates, then you'll have to re-install OS 9.1 (or 8.x or whatever version came with your system) to install the updates.
You cannot update the firmware from OS X on the older iMac G3 systems.
If you already have the latest firmware revision, then you may not need to worry about re-installing OS 9 to install the firmware updates at all.
Take a look at this discussion here:
http://discussions.apple.com/thread.jspa?messageID=2707137&#2707137
That discussion will show you how to check the version of Firmware that you currently have.
This will help to determine if you already do have the latest version installed.
Keep in mind that the firmware revisions shown in this discussion relate to the iMac G3 333 MHz system.
If you have an iMac G3 350 MHz or faster (the ones with the slot-loading CD-ROM Drive), then your firmware revision numbers should be 4.19.
The firmware version / update for the slot-loading CD-ROM drive machines is here:
http://docs.info.apple.com/article.html?artnum=75130
For the older iMac 333 MHz or other iMacs with a tray-loading CD-ROM Drive, the update you would need is here:
http://docs.info.apple.com/article.html?artnum=60384
Note, that you will need to re-install which-ever version of Mac OS that came with your computer to install these firmware updates.
But, if you find that you already have the latest firmware version for your computer, then you can skip re-installing OS 9 (or whatever came with your system) all-together.
If you cannot make sense out of the numbers you find when comparing them to the update, let me know what the numbers are that you find, and I'll see if I can help you out.
If you do re-install OS 9 or OS 8.6 (whichever is needed for your system's updates), then also consider getting the other updates for your system while you are at it:
http://docs.info.apple.com/article.html?artnum=58174
You'll find updates for your modem, and CD-ROM drive there.
I hope this helps.

Bootcamp needs a firmware update that i already have

So i try to tun botocamp but its says i need to download a firmware update. ive already installed mac osx 10.4.7 and i cant find any other downloads on top of that. any ideas?

The firmware you need can be found here:
http://www.apple.com/support/downloads/imacearly2006firmwareupdate101.html
It doesn't show up in Software update, so that probably explains why you've never seen it.

Bluetooth Mouse stops working after software updates

Hello,
I've been using a Bluetooth mouse with my X220 Tablet for several months now. After fiddling with device manager to ensure that the Thinkpad Bluetooth device does not have the "Allow the computer to turn off this device to save power" setting set, things were working perfectly.
However, after running through some windows & Lenovo updates, the mouse now seems to work for a while, but after any idle time, the mouse stops working. Turning the mouse off & back on seems to cause it to reconnect, and it works until the next time it goes idle for 2 minutes.
I've gone through device manager, and made sure both the Bluetooth & USB Root devices are set not to power down (per http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Bluetooth-mouse-stops-working-from-time-to-tim... ), but still no luck.
The software updates applied from the Lenovo System Update tool were:
ThinkPad Power Management Driver: 1.67.04.05
ThinkPad Power Manager: 6.64.4
Lenovo Solution Center: 2.4.002
Intel G1/G2 Display Driver: 9.17.10.3347
Also, some windows updates which don't seem related (mostly security), but I can lookup the list of KB numbers if helpful.
Are there any known issues with the power manager updates that might affect this? If so, what's the best way to revert to the last working version?
Thanks!

Try doing a PRAM reset and see if that helps, also put in new batteries as that may make a difference.
OS X Yosemite: Reset your computer’s PRAM

FIrst ipod, but needs some firmware updates..

I had avoided ipods up to now because they had no built-in FM radio. Now, one does, and it works much better than my Gen 1 Zune radio, except for the "Live Pause" feature.
Is there any chance that Apple might consider improving this feature in a future firmware update?
1. Live pause rewind/forward buttons moves throug the buffer in very large jumps, making it nearly impossible to find the place you want to resume listening at.
Suggestion: add fine forward/reverse control via the the click wheel. Center button selects the wheel to move though the pause buffer, in addition to tuning and volume.
2. It needs a live pause catch-up mode, where it plays back faster to catch up with the current time. (Fast forwarding skips too much material to be useful for this.)
Suggestion: When in delayed playback mode, play back 10-20% faster, without pitch change, (configurable)
3. If not done already, to preserve battery power, add an unbuffered Live Pause mode, where it does not buffer radio audio until pause is pressed. Once playback catches up with real time, turn off buffering again.
4. If I have the ipod powered off and locked, it should NOT power up again when I connect the headphone cable.
When it does this, I have to unlock again, press and hold pause again, then lock it again, Very frustrating.
5. Timed radio recording. Let me set up a recording schedule to catch a particular show (if the headphone cable is connected.)
Message was edited by: Fried Fish

http://www.apple.com/feedback/ipodnano.html

Does the MacBook need a Firmware update?

Hi there,
I was wondering if with this little beast we needs an Update regarding its CPU (Firmware).
Thanks in advance guys.

To run Boot Camp, no. For anything else… that's really up to the Apple-update Gods. Most Macs have at least one firmware update in their lifetimes.

Need? firmware update on 1.8GH Dual processor G5 PwrMac for Tiger upgrade.

Equipment: refurbed 1.8Ghz PowerMac Dual processor, running OS10.3.9 Panther just fine. CPU's: PowerPC 970 (2.2); Bus speed: 900MHz. Boot Rom: 5.1.4fo
I read on Forums of problems some single processor 1.8 G5's have had with firmware updates prior to attempting to run OS 10.4.3 . I was about to install Tiger 10.4.3, now wonder if it will open a can of worms if I update firmware prior to the install. The reported problems were on machines with bus speed of 600mHz; as mine has a 900mHz bus speed, am I not likely to encounter that difficulty? I would appreciate any input from those familiar with this issue. Sounded like some of the affected owners were really stuck for a long time with that particular problem. Thanks.

Since you did not specify which particular model you have, it's hard to tell you whether a firmware update is even required. Open System Profiler and in the summary look for the Machine Model. If it's 7,2 then 5.1.4 is the current firmware version. If it's 7,3, then 5.1.8 is the current firmware version.

Need a firmware update/upgrade for 9500 (rel 4.51)

Hi!,
I'm currently in South America, and I need a way to upgrade the firmware of my 9500 (rel 4.51) to a newest version. I've contact the local Nokia Care team in Argentina, and they don't have the "flashing battery" for the 9300/9500.
CAn anyone suggest me a way to try to upgrade my 9500?. I really need to do it.
Thanks!
Nils Heinemann

new problem, i put the old drive in, ran classic, then opened the update file, but nothing.
then i looked around for an aplication that would run it, i found an "update intaller" app but it refuses to run.
do i need to configure the classic drive to be the master or is there something else im missing?

48L5445DG - need URGENCE firmware update!

Hi Toshiba,
I bought TV 48L5445DG before one week but I am very disappointed!
Firmware version: 3.6.3.c/3.5.3d
The TV is factory reset after online update.
The problems:
- only one USB port work. The USB port below COMMON INTERFACE is NOT functional. The port is powerless.
- Problems in Media Browser buttons PAUSE, FORWARD et BACKWARD. Sometimes buttons works, sometimes NO. I don't know why.
- in 3D mode, if the movie is NOT have 16:9 ratio, the picture is stretch. The button SCREEN is not functional.
Sorry for my english. This is NOT my tongue.

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.

Need help firmware updated problem

dear apple support
how to firmwere updated window 8.1 64bit i got some 3194 plz help i how can update my iphone.

http://support.apple.com/kb/TS3694#3000
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.

Bluetooth mouse N6901 NEEDS a firmware update

Similar Messages

Maybe you are looking for