Bluetooth Mouse not connecting

so i finally updated to snow leopard. my only real issue so far is my mouse wont stay connected. i tired to delete it from the bluetooth menu then re add it but i cant be found(it was found once) i have taken out the batteries of the mouse, and restarted the computer, still no go any advice?

Follow these directions and see if it helps:
http://support.apple.com/kb/HT2845
Regards,
Captfred

Similar Messages

Logitech mx1000 bluetooth mouse not connecting

i've followed the instructions on these two pages:
http://wiki.archlinux.org/index.php/Bluetooth
http://wiki.archlinux.org/index.php/Bluetooth_Mouse
but i've succeeded in getting the mouse to connect only once.
basically, what i did was:
1. installed bluez.
2. set 'HIDD_ENABLE=true' in /etc/conf.d/bluetooth.
3. started bluetooth service.
4. added bluetooth to the daemons array.
5. in /etc/conf.d/bluetooth, set 'HIDD_OPTIONS="--connect <bta>"'
unfortunately, the mouse does not connect at startup. and when i try to connect manually by typing 'hidd --connect <bta>', i get an error 'Can't get device information: Connection timed out'.
when i type 'hcitool scan', nothing comes up. any ideas?
thanks!

still having the same trouble. i managed to connect the mouse once. here's what i did
1. sudo hciconfig hci0 up
2. hcitool dev
3. hcitool inq
4. sudo hidd --connect <bta>
after that, the mouse connected.
i thought everything was all right, so i edited the bluetooth file to connect the mouse at boot.
to test, i rebooted, but the mouse didn't connect. also, when i try to connect it manually by following step 4 above, all i get is: 'can't get device information: connection timed out'.
how can i connect the mouse?

10.6.5 Update - Bluetooth Mouse not Connecting

First off, the fact that exfat/fat64 is now supported is an absolute Godsend. That solves a good 75% of the problems I have dealing with a mixed environment.
However, Once I updated an iMac 5,1 (intel) when the machine boots I have to push the "discover" button and wait a minute for the mouse to be seen at the login screen. Sometimes it won't be recognized at all and I have to plug in a USB mouse to get things going.
I reapplied the full update and that had no effect. Then I tried repairing the mouse - no change.

Bueller? Bueller?

Bluetooth mouse not working on T430s

All my drivers are up to date, my mouse has new batteries, and I tried this fix:
http://sherylcanter.com/wordpress/2010/01/bluetooth-mouse-losing-connection-no-more/
Now my bluetooth mouse only works after I reboot the computer, but then disconnects after a while, and I can't even add it again to my bluetooth devices.
Can somebody please help?
Solved!
Go to Solution.

Hi everyone!
I had problems with my new Rapoo 6080 mouse, it didn't want to work with my laptop anyhow.
The connection was successful, but the cursor was dead, and in a few minutes Windows removed the mouse connection with the following error in Event Log:
Initial connection to Bluetooth HID device failed. The device has been removed as a personal or paired device. You must reinstall the device.
I called Lenovo techsupport, they have referred me to this thread.
Now I have found a solution, that might not be perfect and requires some skills, but IT WORKS (at least for me). I have installed Toshiba bluetooth stack on my laptop, replacing the drivers from Lenovo.
Toshiba has ceased support for other manufacturer's devices in their stack, but a little fix of VID and PID values in tosrfusb.inf file did the job.
Not sure if I should provide details on how to do the whole process, as it requires some skills and accuracy. I guess those who are familiar with Windows will find their way.
BTW, the stack I downloaded is not latest, it was version v80012T_20110809_x64. But I guess the latest may also do the job.

Bluetooth mouse not working

Bluetooth mouse not working.
can click and scroll but pointer will not move.

Hello:
Try resetting the PRAM and SMC.
Barry

IPhone5 bluetooth can not connect to macbook air?

hi
my iPhone5 bluetooth can not connect to macbook air (mid 2012).
is bluetooth on iPhone 5 designed so that it CANT connect to computers?
thanks

Yes, BT on the iPhone only has profiles for hands-free, audio, tethering and control. It does not support file transfer profiles.

Iphone 4s bluetooth does not connect to sound system

just bought Iphone 4s 2 days age. Bluetooth can not connect to sound system in my chevrolet captiva model change 2011 (Thailand) but my Iphone 3gs with iSO 4.2 is still worked well.

I have the same priblem. Got the 2013 Captiva (Thailand) LTZ and the dealer claims APPLE devices are not compatible. This is a Chevy issue - howcome Chevy cannot make their executive target market SUV be compatible with the leading phone used by executives??? This is such a turnoff.

Iphone 4S bluetooth does not connect with any other Bluetooth

Iphone 4S bluetooth does not connect with MacBookPro Bluetooth or any other Phone with Bluetooth. Can someone please help !!!

Hi There!
I am having the same problem, my brothers samsung picks up every bluetooth device thats remotely close but the 4s just sits there searching while sitting on the same desk as my iPad2, iMac 24" and headset that worked fine on my old 3 g.
I am not hugely tek savvy, can anyone explain in easy speak (the kid at the local apple reseeler told me the new bluetooth used on the 4s is not compatible with the older bluetooth devices.... hmmmmmm)
There must be a solution..... Thanks in advance

Part replacement for Apple Wireless bluetooth mouse ( not mighty)

I am looking for a bottom panel for my old apple wireless bluetooth mouse (not mighty). My son has dropped it down and that is how is not switching off anymore. I am thinking about replacement of that anyway removable panel (you remove it to place batteries),so I guess this part must be around somewhere. Any help is appreciated, thank you very much in advance!

Hello m:
The only people that can answer that are the Apple people. As far as I know, those parts are not available from the web site.
Frankly, I think I would buy a new mouse as something may be damaged internally.
Barry

Bluetooth is not connected

My bluetooth is not connected since yesterday. my mbp is currently running on os x 10.7.2 . i have already done SMC and PRAM resets, but it didn't help. Wonder if anyone can advise me on this. Thanks

Reset the SMC.
Barry

IMac 27" with Win7, Apple bluetooth keyboard not connected, STUCK.

I made a huge (and naive and stupid) mistake and now have an iMac stuck at the Win7 boot screen because it can not find the keyboard. I can't boot it back into OSX either because the keyboard OPT key is not recognized. Here is what happened:
My iMac 27" was working perfectly in dual boot mode and I could arbitrarily boot in either OS without problem since 3 months. Well, today, a friend called and said that her Apple keyboard is not recognized by Win7 on her iMac and she can not type. So I made sure that the battery is good and the green light is on, then I told her to go into the bluetooth device panel and remove the keyboard then re-pair it again. My thought was that I have done that with all bluetooth devices in Windows without problem, and Apple hardware and software is solid, so that got to work without a glitch, right. WRONG. She struggled to pair and connect the keyboard in Win7 to the point that I said I will remove my keyboard device and reconnect it so I can tell her the exact steps. Well, I learned the hard lesson with Apple stuffs myself. After removing the keyboard device, I could pair it, but not without difficulty. Then, however, does not connect, since I could not type and the device driver says that the device can not be started. Then I read messages in the Apple forum recommending to boot up in to OSX to remove the device there and boot it back into Win7 to pair it. OK. I used the mouse to shut down the Win7 and forgot that I have no keyboard now. I couldn't have used Boot Camp control panel to boot into OSX but I was so confident in Apple that I did not think about it. Now, I am stuck with a machine that boots into Windows without stopping and hangs at the first screen because the keyboard is missing. I inserted the OSX DVD in the hope that it would boot from the DVD but it does not. And the DVD is of course stuck in the drive. I am working at a remote location and do not have a usb keyboard or anything else.
Can anyone recommend a procedure to boot into OSX in my situation? Or can anyone tell me if I can pair and connect the keyboard in the BIOS? I googled but could not find anyone in a similar situation like mine. My friend can take her machine to Apple store for service, but I am in a country that has no Apple store.
Thank you very much for any hint.
tom

I don't know but I installed my Windows 7 with Bootcamp without using a USB keyboard (cuz I don't have one). But you will at least need a USB mouse though. The moment it requires me to use keyboard input for various of information the bootcamp already downloaded required drivers and updates for my wireless keyboard to work. Make sure your wireless keyboard are on and try type something on it (it goes into some sort of sleep mode when you first start it).
Message was edited by: Aetherbomb

Bluetooth Mouse not working in Windows 7?

Just installed Windows 7 Ultimate 64bit on an iMac i5 with 20Gb
Everything installed correctly and W7 boots fine, even did the drivers for bootcamp before the full Windows install
Thing is I have the Apple slim Bluetooth Keyboard and Magic Mouse (that come with the iMac) it seems that the Mouse just will not respond??
The keyboard is working?? on Bluetooth but not the mouse and as i dont have a corded one to hand i am trying to navigate the whole Windows with my keyboard!!
please help how do i get Windows to see my Apple Mouse under bootcamp??

my exp is that my magic trackpad unlike in osx require ment to click it before it turn on and begin to respond to touch
but my bluetooth razer mouse don't work with blutooth so I connect it by usb which it also support could be that windows don't care for 2 bluetooth "mouse" input devices at the same time

Magic Mouse not connecting to MBP after Sleep or Re-start

This has been an on going problem for me since I upgraded to OSX 10.8 on my MBP. Since the upgrade my Magic Mouse will no longer connect to my MBP after it has gone to sleep, restarted or shut down. The only way I have been able to get a connection is to Click on the BT icon goto the mouse>Open Preferances. At this point the computer is 'Waiting for a Bluetooth mouse to be discovered' and it will keep searching forever. Clicking on the mouse button or moving the mouse around does not do anything even though the green light on the bottom of the mouse indicates it is on & attempting communication. I have to turn the mouse off for 3-5 seconds and then turn the mouse back on. This is the only way for the computer to see the mouse, I then click connect the mouse connects and all is good until the computer sleeps, gets restarted or shut down.
I have tried resetting the PRAM & SMC. I have also deleted the mouse from bluetooth preferances and re-paired it with the computer several times. I even tried deleting the PList and re-pairing but nothing yet has worked!
Open to any and all suggests! PLEASE help!

Hi,
I have a mid 2014 15 inch MacBook Pro and I'm experiencing now the same issue. I have an iPad and an iMac and the issue is only with the MacBook Pro.
I went to System Preferences > Network > Wi - Fi and selected 'Ask to join new networks'. It didn't remove completely the issue (is still not finding the network) but at least I don't have to turn the wifi on and off all the time because after a while is able to connect.

Bluetooth mouse not working in Mavericks

Hello
After upgrading to OS X Mavericks, my bluetooth mouse stopped working. The OS can see the bluetooth mouse and it connects to it, but after "mouse connected" it doesn't work, i get no mouse response at all. Tried some other users solutions but none of them work. I've tried the bluetooth mouse in other computers and it is working fine.

Restart the computer holding down the command - option/alt - P - R keys before the gray screen appears. Continue to hold until you hear the startup chime for the second time.
Reset NVRAM/PRAM
Try a SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC

Ultraslim Plus Wireless Keyboard and Mouse not connecting

I just bought the Ultraslim Plus Wireless Keyboard and Mouse, but I can't get either to work. My machine (ThinkPad X230-2324-HQ4) does not have a CD drive for me to use the install CD, so I found and downloaded the driver from your support site:
http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-77112
I installed the driver properly and restarted my computer, but neither the keyboard or mouse will connect still. I've checked the batteries, and I've verified that my ThankPad's Bluetooth drivers are up to date and working properly, but I still can't seem to get it to work. I've found posts on here from people with similar issues, but they seem to all be related to the Ultraslim, not the Ultraslim Plus. The Ultraslim Plus does not include a USB dongle for connection.
Please help!

The Ultraslim Plus Wireless Kit is Wireless 2.4G solution, it is not Bluetooth solution. It has a dongle when shipping. Maybe you can check the mouse or Keyboard inside and find the dongle. You can open the mouse battery bin, it should be a dongle at top of two batteries. If you still can not find the dongle, I suggest you call the Lenovo help center since you don't have the dongle.

Bluetooth Mouse not connecting

Similar Messages

Maybe you are looking for