Bluetooth mouse stops working when adding a printer: 10.10.2

Hi,
I'm using a MacBook Pro 2012 Retina, upgraded to 10.10.2. Since upgrading to 10.10.2 I have been unable to connect to my Canon MG6150 that is plugged into the USB port of the Time Capsule (3TB). Those problems will be detailed in a separate post.
I have tried deleting the printer and creating a new printer and when I click on the + and get the window to select a printer, the bluetooth mouse stops working - the message comes up to show "Connection Lost". I have to select the printer manually and only when I have returned to the main Printer window in Settings & Preferences does the mouse connection work again.
Weird. Between this and not being able to set up the scanning features again (that used to work), I'm feeling underwhelmed...

sounds like an IRQ conflict. See if disabling plug and play in the bios solves it. Arch's kernel provides this already.

Similar Messages

Bluetooth Mouse stops working after software updates

Hello,
I've been using a Bluetooth mouse with my X220 Tablet for several months now. After fiddling with device manager to ensure that the Thinkpad Bluetooth device does not have the "Allow the computer to turn off this device to save power" setting set, things were working perfectly.
However, after running through some windows & Lenovo updates, the mouse now seems to work for a while, but after any idle time, the mouse stops working. Turning the mouse off & back on seems to cause it to reconnect, and it works until the next time it goes idle for 2 minutes.
I've gone through device manager, and made sure both the Bluetooth & USB Root devices are set not to power down (per http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Bluetooth-mouse-stops-working-from-time-to-tim... ), but still no luck.
The software updates applied from the Lenovo System Update tool were:
ThinkPad Power Management Driver: 1.67.04.05
ThinkPad Power Manager: 6.64.4
Lenovo Solution Center: 2.4.002
Intel G1/G2 Display Driver: 9.17.10.3347
Also, some windows updates which don't seem related (mostly security), but I can lookup the list of KB numbers if helpful.
Are there any known issues with the power manager updates that might affect this? If so, what's the best way to revert to the last working version?
Thanks!

Try doing a PRAM reset and see if that helps, also put in new batteries as that may make a difference.
OS X Yosemite: Reset your computer’s PRAM

Itunes has stopped working when adding to playlist

I get the Itunes has stopped working message when adding new files to a playlist, has anyone else had this problem, and is there a solution?

Still having issues :/

Adobe Reader stops working when trying to print

When I try to print something from Adobe Reader 9, I get a message saying that Adobe has stopped working. I un-installed the program, downloaded and re-installed it, but still get the same message. I am using a Medion PC running Vista, with 4GB memory. Any help would be much appreciated.

I have the exact same problem, with complications. I have Adobe 8, which was I think a pirated copy put on my laptop when a local technician uninstalled and reinstalled Windows XP. It worked fine until recently. Suddenly it stopped printing for me -- same message that it can't find the printer. I tried uninstalling and reinstalling. I even uninstalled and reinstalled the printer, which works fine for any other kind of document. I also tried installing Adobe 9. It said it couldn't uninstall Adobe 8 and so couldn't install. I couldn't delete Adobe 8 myself, either -- Windows message said that a certain patch was missing that it would need to proceed. So now I have found the same workaround mentioned above -- open the document in Word and print from there.
This could be a new problem in printer settings for Adobe, or the issue could lie with my copy -- which is probably pirated and which has never updated. I can't even get more than a blank page when I click on "Beyond Adobe Reader."
I'd be glad to start over with a fresh copy or a fix from Adobe, even if I had to pay for it. I would need the ability to delete the bad version 8 and an aborted version 9 so that I could start fresh and install. (Version 9 install now says that now it can't proceed because it has already half installed a version 9 -- which is, however, invisible when I look for it to get rid of it.) Help!
I am stuck.

ITunes has stopped working when adding movies

This issue began today, haven't had any trouble with this before. I have my movies on my iTunes, in there perfectly fine. Today I went to add more movies to my iTunes library. I use Windows, so I went to the 'Add Files to Library...' option in the top left, added a video. It didn't take any loading time, which seemed a bit out of the ordinary, then I tried to play it and my iTunes completely crashed. When I open my iTunes back up, the movie is gone completely. I have tried restarting my iTunes, restarting my computer, reinstalling iTunes, adding movies in different ways (dragging and dropping), but nothing has worked so far.
I'm fairly sure this isn't a format issue, as it's stopped working for .m4v files and .mp4 files, I've tried converting one to the other and nothing has for it to load properly into iTunes.

Still having issues :/

Re: Logitech Travel Bluetooth mouse stopped working with my Satellite A300/

Whilst happily using my Logitech Travel Bluetooth mouse, suddenly it stopped working, thinking it was a mouse problem, I first put a new battery in, but still not working. Had a look in the Bluetooth settings and it was still showing in there, at this point the computer was still in warranty. Later I tried to connect my mobile and that worked ok, so I was now convinced that it was the mouse. Rang the shop where I bought it, tough luck mate, we are not interested in helping you...thanks!
Some time later I got a chance to try the mouse on another computer, hey presto it worked fine....yippee maybe it will now work on mine...no such luck. So now I am thinking that there must be a problem with my laptop...and of course the warranty is now run out!
I have now deleted the Laser mouse in the Bluetooth settings, thinking being that maybe a new search and install could solve the issue, but now whilst it sees my phone it cannot connect to it and it does not even see the Laser mouse at all.
The driver version it is using is 5.0.2518 which is probably what came with the computer. As far as I know I have never updated it.
This all seems strange to me that one moment it is working and the next it is not...anyway is it worth trying to update the driver software> or am I barking up the wrong tree.
Any help would be appreciated.
JD

Thanks for your reply hammer.
I have now installed the latest bluetooth drivers, the only thing that has happened is that it can now connect to my mobile phone. the mouse is still a no goer.
All the drivers seem to be there and I took a note of the versions prior to the update, they have all been updated ok, there are no crosses against any item in the Device Manager.
Hmm hardware issue could be a bit difficult. But as it is now out of warranty maybe I will need to take it apart myself and see if I can find out the problem.
Must say that I am slightly disapointed to have this happen....I bought Toshiba cos from all accounts it is supposed to be the best out there, but next time I think it may be a different brand.
cheers.

Keyboard, Trackpad, and Bluetooth mouse stop working

My powerbook G4 1.67 keyboard and trackpad stop working after a few minutes of use. Useing an extermal keyboard or mouse does not help. the caps lock light does not come on either. I force quit by holding the power button down. Fails each time

Please use Apple Troubleshooting wireless mouse and keyboard issues located at http://support.apple.com/kb/ts3048

ITunes stop working when adding movie. 10.5.2.11

I have just changed PC, from a XP-one to a 7-one and now iTunes stop working now and then (often). When I try to add a movie from a library on the PC it allas stops. It worked well on the old PC. I have tryed to reinstall iTunes but no change.

I have the same problem on XP sp3. This is since the appearance of TuneUp. Again a so-called "useful" application.
Apple Programmers, please K.I.S.S. Keep It Simple and Stupid. I do not want to be suggest to do something, I don't want to be warned of this of that, Geniused or pinged... In the past, Itunes loaded on my pc in less than 10 seconds and it worked. Now, It blocks my computer and I can not buy music anymore !!!!! Apple programmers, you are working against your business !!!!!!!!!!!!!!! I want a LITE version !!!!
A very disappointed and disillusioned customer

Bluetooth keyboard stops working when i plug in my iphone 5

Hi All...
Heres a question from the twilight zone where strange things happen.
My Hardware/Software used:
- iMac OSX 10.9.2
- Mac wireless Keyboard
- Logitech mouse performance MX
- iTunes 11.1.5 (5)
- iPhone 5 v7.1 (11D167)
I plug in my iPhone via USB cable, and iTunes pops up.. it detects the iphone but not 100% as it just hangs... then out of nowhere, the keyboard stops working as it looses its connection, the only way to restore the connection is to reset the iMac.
Any ideas?

Assuming a PC try:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

64 Bit has stopped working, when adding presets

I have added Lightroom to a new laptop and my presets that I purchased which were sent though an email on a file will now not add to Lightroom, I keep getting the message 64 bit has stopped working.
This is for all the brushes, like smooth skin, whiten teeth ect.
Its a 4.4 Lightroom 64 bit.
Please help!

Can you provide the exact wording of the error message, please?

Itunes stops working when adding file/folder etc

Every time I try to add a file/folder or import a playlist etc, my itunes crashes and stops working. Any ideas why/fpossible fixes?

Same problem. Did you find a solution?
Melissa

Premiere Elements 4.0 stops working when adding a title

Whenever I add a title, it quickly goes to "Adobe Premiere Elements.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
What to do? Thank you in advance for any input on the matter.

Let me premise my responses by, Prem Elem had been working fine and this issue just started not too long ago
Processor: 3500+ AMD Athlon 64 processor
RAM: 1GB Free? Not sure what you mean.
Defrag space: just analyzed. All ok
OS: Vista, not sure if fully updated...need to check
QT: just updated
Camcorder: Panasonic PV-GS80
Proj Settings: Not sure what you mean, "New Project?"
I'll make sure Vista is updated. Thinking about getting more RAM. It does say 1GB for on the "System Reqs" for Prem Elem
Thanks

SCOM 2012 System Center Operations Manager has stopped working when adding Web Console.

I am trying to ad the Web console to one of my Management Servers but at the point where it asks what website to use it fails with the "System Center Operations Manager Setup has Stopped working error.
This is the included information.
Problem Event Name: CLR20r3
Problem Signature 01: setupchainerui.exe
Problem Signature 02: 7.0.9538.0
Problem Signature 03: 509042f2
Problem Signature 04: System
Problem Signature 05: 4.0.30319.18022
Problem Signature 06: 506a7689
Problem Signature 07: 1cf5
Problem Signature 08: 72
Problem Signature 09: System.UriFormatException
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 79c6
Additional Information 2: 79c63d7b6daeea05a42903612b7137d2
Additional Information 3: 88ec
Additional Information 4: 88ec54f8fa758d8069cdb2ad5cd91e2b
The only error I get in the log file is this.
Error: :Error:IsReportingValidToInstall failed SRS instance not provided
I don't understand why I would be getting an SRS error, our reports run fine.
Thanks,
Gary

Hi Gary,
Did you end up finding a solution to this issue? The GUI and silent/command line installer are failing for me in the same spot.
App Log Errors:
Application: SetupChainerUI.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException
Stack:
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(System.Exception)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.Common.Internal.SdkChannelObject`1<Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService>)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.ManagementGroupInternal)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(System.String)
   at Microsoft.SystemCenter.Essentials.SetupFramework.WebConsoleSite.GetValidationProperties(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
Faulting application name: SetupChainerUI.exe, version: 7.0.9538.0, time stamp: 0x509042f2
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
Exception code: 0xe0434352
Fault offset: 0x00000000000043c8
Faulting process id: 0x638
Faulting application start time: 0x01cf9a697847d9c8
Faulting application path: C:\Users\szb\AppData\Local\SCOM\SetupChainerUI.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: c52d5d75-065c-11e4-80c2-00155dcb0b37
Faulting package full name:
Faulting package-relative application ID:

Mouse stops working when i accept a call in skype ...

Hi there....
I have just updateded to the latest version of skype in order to trty and fix this issue but to no avail....
the issue i have is with skype and my razer naga epic, when i make and is accepted or i accept a call on skype my mouse goes to the bottem right corrner of my screen and is locked there as if by rubber bands i can right left click okcay but i can not move the mouse untill the call is ended once that happens then i can move agen.
this issue only affects me with i am talking on skype no other VOIP does this to me so i asume that is is a conflict some where with skype i am at a loss after a week of trying to fix this iff any one could offer a solution i would be eternaly greatfull...
many thanks
mark

solved it about tem min ago tuens out that having the epic and my wireless hedset in the same powerd hub caused the conflicts to i moved the headset now all is good agen.
the epic needs to be there so that the mouse will charge when the PC is off but the headset does not....
All fixed so answer no usb headset and epic in the same hub (tryed the usb qwired i have same issue) as they will conflict on any voice call.....

My touchpad (mouse) stops working when I connect it to the power cord?

It works fine when It's not connected to the power cord... but as soon as I connect it and I try to use my touch pad it just goes erractic and like I can't click anything and it's just unusable. What can I do to fix this (aside from buying a new power cord....)
My computer is updated completely.
It is a Macbook.

Try troubleshooting the adapter > Apple Portables: Troubleshooting MagSafe adapters

Bluetooth mouse stops working when adding a printer: 10.10.2

Similar Messages

Maybe you are looking for