Bluetooth mouse sudden disconnected and needs to manual reconnectg

Before upgrade to Lion 10.7.2 from 10.6.x, the blue tooth mouse is completely perfect, however, it will sudden discounnected and need I use the USB mouse to manual reconnect it via the Blue Tooth menu..
I already set it to my faviour in the blue tooth device but problem presists....
iMac27" 2.8GHZ Core i5 / 8GB ram
Please help

Hi Gabriel,
I have the same problem too. I have macmini and mac book pro, both running osx lion 10.7.4.
But the problem only happens on macbook pro - i need to manually reconnect mouse from bt menu.
Have you found any solution?

Similar Messages

  • Magic mouse constantly disconnects and can't get it to connect without rebooting the computer.  Anyone else have this issue

    How do you solve the problem of the magic mouse constantly disconnecting?  I have changed the batteries and turn it on and off, but the only way to get it to reconnect seems to be re-starting the computer.  Any thoughts?  Thank you.

    Greetings Beth,
    Wireless devices are susceptible to interference.  Review this article for common sources: http://support.apple.com/kb/TS3048#5
    They are also very sensitive to low power.  Make sure you are using VERY fresh batteries.  If they have been sitting on a shelf for months they don't count as fresh IMO.
    Troubleshooting steps to try after you read that article at the top:
    Remove the following to the trash: Macintosh HD > Library > Preferences > com.apple.Bluetooth.plist
    Restart the computer and re-pair the mouse and keyboard
    If issue persists reset the SMC:http://support.apple.com/kb/HT3964
    If the issue persists reset the PRAM:http://support.apple.com/kb/HT1379
    Hope that helps!

  • "do not disconnect" and automatic vs. manual updates

    today, i switched my ipod to disable automatic updating b/c there were songs (e.g. holiday music) on my itunes and ipod, which i wanted to remove from my ipod. but when ever since i switched to manual update mode, my ipod says "do not disconnect" and it must be manually ejected (dragging icon to trash before disconnecting from usb port). even when i switched my computer/ipod back to original settings (automatically update music versus manually update from itunes), my ipod still must be ejected manually and displays "do not disconnect". how can i get it to the way it was?
    thanks in advance for any answers.

    Michelle,
    With iTunes open click on the iPod icon located at the lower right of the pane.
    In the preferences you have the option to, "Enable Disk Use". If this is checked then your iPod is mounted as a hard drive. If you uncheck this box you will see the "Do Not Disconnect" disappear.
    hope this helps.

  • Mouse intermittently disconnects and almost immediately reconnects.

    This frustrating situtation has been going on for months and I'm at my wit's end in trying to figure it out.  I will be typing a note in email or whatever and all of a sudden the mouse disconnects.  Within 10 - 20 seconds it reconnects.  Help please.
    Thanks

    Glad it helped.
    Barry

  • I have a Dv6-3160 US. The bluetooth mouse periodically unpairs and won't reconnect any ideas?

    I am using a Microsoft Notebook Mouse 5000.  I have had to uniinstall and reisntall the bluetooth adapter several times.  Any fixes for this problem?

    This is more about your modem then anything. Sometimes you'll need to unplug and plug back in your modem. Consider it a glitch from the ISP or just the modem in general.
    when I need to turn something off then on I try the modem first. This when I'm not doing any ware and tare to the device.

  • Bluetooth mouse suddenly quit pairing

    Is anybody else finding problems with bluetooth devices? My Logitech mouse gave up.
    Changed the batteries.  Tried and retried pairing.  Now using old wired mouse and I
    hate it.

    Since my original post, I got my mouse working again by deleting it and then re-pairing.  But the connection is lost when my MacBook Pro is either restarted or cold booted.  Further, the mouse is no longer discovered.  Took your advice and turned off everything Bluetooth.  Still no discovery.  So just for yucks I took the Mac where there was no electrical interference.  Still no discovery.  Then tried my (Apple) Bluetooth keyboard, which was working fine a short time ago.  It too is not discovered.  At this point I have no connectivity to Mac whatsoever.  It is clear that when the machine is restarted, the connections get lost.  It's not a mouse, iPhone, iPad, or Apple Keyboard problem.  Something has changed in the OS and really wish that Apple would fix it.

  • Bluetooth mouse X4000b recognised and working for 5 mintes then not work

    Posted in the wrong area. Moved to Other HP Tech.

    Hi Adrian,
    Here is a document with some Bluetooth troubleshooting. Try that out and let me know how it goes.
    Also double check the batteries as well.
    http://h10025.www1.hp.com/ewfrf/wc/bluetoothDocument?lc=en&cc=us&docname=c00215252
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My bluetooth Mouse periodically disconnects

    My problem is as written in the header: my mouse looses connection with Mac sporadically for the last 2 days. Could diminishing charge of the mouse batteries be the reason (12% currently)? Or there's smth else?
    Thank you
    scrutinizer

    I would certainly put fresh batteries in the device. Those percentages are estimates.
    I would also reset the PRAM and SMC (cannot hurt, might help).
    Barry

  • HT4061 I was software updating of my iphone when the updating complete and start installing the wi fi connection suddenly disconnected and it couldn't be completed. Now my phone doesnot display anything its like empty. it only shows  the apple logo. help

    Hi all,
    i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..

    Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let  them go.
    if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore. 

  • Wifi sudden disconnection and lock button not working properly on my iphone 4s.......    It is under warranty

    When using wifi on my iphone,sometimes it disconnects automatically...... And my lock button is not working properly.....
    What should i do, my iphone is under warranty....

    The Sleep/Wake button is a hardware issue and that's covered by the warranty. I would take it to the Apple Store and see what they can do.
    Hope that helps

  • Wireless Bluetooth Mouse stops occassionally. Using T410 and Windows 7 64bit

    I have tried the registry changes suggested elsewhere. However the thinkpad bluetooth mouse just suddenly stops and needs to be powered off and on before it works again. Any ideas.

    Hello mate,
    Have you got the latest driver ?
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Bluetooth Mouse Pointer and Clicker Freezing

    Hello,
    I bought a Genius Navigator Mouse model 905BT and connected to my MacAir 11.6". I noticed that my mouse pointer and clicker froze every 15 seconds. I tried this same mouse connecting to my old Macbook 13 inch (version 10.6.2) and on my Windows Laptop with no problems encountered. There were no notifications that the mouse is disconnected and reconnected. It just freezes when I am currently using it. The batteries are new.
    Regards
    Ed

    Hi,
    It has been fixed when I upgraded the Mac OS to 10.6.5 which just released today.

  • Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

    as title
    My usb mouse auto disconnect and reconnect time and time,
    no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
    Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
    Mouse: Logitec G400/G1
    Display:Lenovo D2081WIDE
    machine:T430 2349 CTO

    system info:
    machine TYPE: THINKPAD T430 /2349CTO
    operating system :Lenovo OEM ultimate X64 SP1
    mouse type:Logitech G400 and Logitech G1
    time:from 2012-10 to now
    threat NO.1
    USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
     every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
    threat NO.2
    Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
    threat NO.3
    the battery auto losing capacity!!!!!!
    1% everyday about 0.2Wh
    since I bought to now,
    the Design capacity has losing from 57.XX Wh to 47.52Wh
    and full charge capacity is 48.68.
    the battery info:
    cycle count is 18
    Bar-Code number 1ZKFD27S1RF
    SerialNumber 1896
    First used date 2012-09
    FRU 45N1001
    Firmware 0003-0080-0100-0165

  • Re: Logitech Travel Bluetooth mouse stopped working with my Satellite A300/

    Whilst happily using my Logitech Travel Bluetooth mouse, suddenly it stopped working, thinking it was a mouse problem, I first put a new battery in, but still not working. Had a look in the Bluetooth settings and it was still showing in there, at this point the computer was still in warranty. Later I tried to connect my mobile and that worked ok, so I was now convinced that it was the mouse. Rang the shop where I bought it, tough luck mate, we are not interested in helping you...thanks!
    Some time later I got a chance to try the mouse on another computer, hey presto it worked fine....yippee maybe it will now work on mine...no such luck. So now I am thinking that there must be a problem with my laptop...and of course the warranty is now run out!
    I have now deleted the Laser mouse in the Bluetooth settings, thinking being that maybe a new search and install could solve the issue, but now whilst it sees my phone it cannot connect to it and it does not even see the Laser mouse at all.
    The driver version it is using is 5.0.2518 which is probably what came with the computer. As far as I know I have never updated it.
    This all seems strange to me that one moment it is working and the next it is not...anyway is it worth trying to update the driver software> or am I barking up the wrong tree.
    Any help would be appreciated.
    JD

    Thanks for your reply hammer.
    I have now installed the latest bluetooth drivers, the only thing that has happened is that it can now connect to my mobile phone. the mouse is still a no goer.
    All the drivers seem to be there and I took a note of the versions prior to the update, they have all been updated ok, there are no crosses against any item in the Device Manager.
    Hmm hardware issue could be a bit difficult. But as it is now out of warranty maybe I will need to take it apart myself and see if I can find out the problem.
    Must say that I am slightly disapointed to have this happen....I bought Toshiba cos from all accounts it is supposed to be the best out there, but next time I think it may be a different brand.
    cheers.

  • Usb mouse constantly disconnects/reonnects

    After the boot camp update to provide audio support for ear phones, I have noticed that my wired usb mouse occasionally disconnects and reconnects with a "de-dunk" sound.  Any thoughts?  Also this is happening on windows 7.

    Greetings Beth,
    Wireless devices are susceptible to interference.  Review this article for common sources: http://support.apple.com/kb/TS3048#5
    They are also very sensitive to low power.  Make sure you are using VERY fresh batteries.  If they have been sitting on a shelf for months they don't count as fresh IMO.
    Troubleshooting steps to try after you read that article at the top:
    Remove the following to the trash: Macintosh HD > Library > Preferences > com.apple.Bluetooth.plist
    Restart the computer and re-pair the mouse and keyboard
    If issue persists reset the SMC:http://support.apple.com/kb/HT3964
    If the issue persists reset the PRAM:http://support.apple.com/kb/HT1379
    Hope that helps!

Maybe you are looking for

  • Question about Custom Shape Files from newbie to PS

    My husband bought me PS CS4 Extended. That said, I have never used PS at all. I have always used PSP. Please don't hate me! I have figured out that one loads actions and presets. OK, got that. The question I have is if I can have my Custom Shapes and

  • DUMP in CX_WD_CONTEXT - Could find attribute exception

    Hello Experts, We got dump while processing Recording Working Times in ESS at Portal level This dump occurred only for one user and working fine for other users. Please let me know what will be the solution for this dump. (*****Class CL_WDR_CONTEXT_N

  • "Open With" drop-down menu has multiple instances of apps

    When I right-click on a file and select "Open With", the resulting drop-down menu contains many, many multiple instances of the same app - five Firefox's, five Quicktime Player's, at least three instances of every relevant app. Why is that happening,

  • IMAP not working after 10.2 OS release

    I have 3 email accounts on my Q10 all with different providers set up using IMAP and SMTP. Everything worked fine through OS 10 and 10.1. It stopped worked yesterday when I installed 10.2 yesterday. I can now no longer receive emails, but I can still

  • Save Form task TS17900108 database save failed but no workflow error

    Hello Friends, We are using process and forms workflow in business for various PA OM related processes. Some time (once in 2 weeks or so) what happens is we get ticket from users saying that they got approval emails for a actions stating that action