Bluetooth Mouse X7500 on MAC OSX

I bought an X7500 bluetooth mouse for my Mac. There is a MAC logo on the box, but I am not able to find the driver for MAC anywhere. (OSX 10.9.4).
The mouse has been paired to the lap-top, and functions very well, as it is decently sized. The left and right buttons are good, and the scroll-wheel scrolls with two speeds. I may also push the wheel to move the page around.
The scroll-wheel may be tilted left and right, and I assume that this is supposed to cause the current object moving left/right but nothing happens. I also assume that the two buttons on the top left-hand side are for back and forward. When I push one of them, it has the same action as pushing the scroll-wheel.
Is there a driver for this mouse somewhere?

I use a Logitech MX900 Bluetooth mouse with my PowerBook and for the most part it works fine. There are times when it just loses the plot and behaves like yours. I don't think it is a case of insufficient bandwith as Michael suspects but more a problem with intereference. I do notice that when there is a high use of my Airport connection the erratic behaviour is more prevalent.
If you use both Airprt ans Bluetooth concurrently you might want to switch off Airport off to see if your mouse goes any better.
Either way though you will find that a wireless USB mouse to perform better under most, if not all, situations.

Similar Messages

Hp bluetooth mouse x7500 cant be found

I have installed the HP mouse suite 2.9, but the hp bluetooth mouse x7500 cant be found there. Same problem on both my computers.
The mouse is working well otherwise.

OK, according to the specs of your Lenovo, it is Bluetooth 4.0 enabled and should be compatible with the HP mouse.
However...
Since this Bluetooth Mouse does not come with a dongle that would install a driver via usb, the computer relys on the drivers installed for the radio in the bluetooth card in the laptop.
I think this is a question for the Lenovo forums.
In the specs for the T430, I saw Bluetooth driver downloads for the various versions of Windows available.
I would check with Lenovo support first as you may need to install that.

Bluetooth mouse not waking mac

My bluetooth mouse and keyboard stopped waking my mac. Does anyone have any suggestions to fix this issue?

Hello:
Go to system preferences>bluetooth>advanced. Be sure "allow Bluetooth devices to wake thsi computer" is checked.
Barry

Bluetooth Mouse movement on Mac Mini Core Duo

Bluetooth mouse movement and tracking is a bit strange. The pointer overshoots the target and 'hugs' the edge of the screen. It's not a problem with one particular mouse - two different manufacturers behave in exactly the same way. Both mice work fine on my PPC machines. Any ideas or solutions?

I use a Logitech MX900 Bluetooth mouse with my PowerBook and for the most part it works fine. There are times when it just loses the plot and behaves like yours. I don't think it is a case of insufficient bandwith as Michael suspects but more a problem with intereference. I do notice that when there is a high use of my Airport connection the erratic behaviour is more prevalent.
If you use both Airprt ans Bluetooth concurrently you might want to switch off Airport off to see if your mouse goes any better.
Either way though you will find that a wireless USB mouse to perform better under most, if not all, situations.

Aurvana Bluetooth Pairing Issues with Mac OSX

Have Creative Aurvana Gold headphones and they pair with iOS devices pretty easily; however, on my Mac (OSX Mavericks latest) they now refuse to pair/stay paired. I've tried deleting the device from the Mac and re-pairing several times. Also rebooting, etc. Nothing seems to work.
The initial pairing goes perfectly and then after 20-30 seconds or so the connection drops. Battery is full. Tried powering the headphones on/off a million times, rebooting countless times, etc.
In Mac OSX Console I see this set of messages every time:
7/24/14 11:19:58.952 AVRCPAgent[4618]: Plugin path: '/System/Library/CoreServices/AVRCPAgent.app/Contents/PlugIns/' not found.
7/24/14 11:19:58.959 AVRCPAgent[4618]: Setting the delegate returned 0
7/24/14 11:19:59.040 AVRCPAgent[4618]: New AVRCP data: <10110e01 48000019 58100000 0103>
7/24/14 11:19:59.040 AVRCPAgent[4618]: [parseSTATUS] VENDOR: Events Supported
7/24/14 11:19:59.040 AVRCPAgent[4618]: [parseSTATUS] packing in vendor-spec headers...
7/24/14 11:19:59.105 AVRCPAgent[4618]: New AVRCP data: <20110e03 48000019 58310000 05010000 0000>
7/24/14 11:19:59.105 AVRCPAgent[4618]: [parseNOTIFY] registering for notification: 'Playback Status Changed'
7/24/14 11:19:59.247 AVRCPAgent[4618]: New AVRCP data: <30110e03 48000019 58310000 05050000 0001>
7/24/14 11:19:59.247 AVRCPAgent[4618]: [parseNOTIFY] registering for notification: 'Playback Pos. Changed'
7/24/14 11:20:14.821 Drive Mounter[614]: Attempt 6
7/24/14 11:20:15.000 kernel[0]: [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0xb
Sometimes the headphones will stay paired if audio is playing at the time they are paired, but I can't be certain that's the reason.
UPDATE: While they are connected I can't really listen to anything / play videos. YouTube just hangs for example. And the console now shows a ton of these messages:
7/24/14 12:25:16.000 kernel[0]: ### ERROR: opCode = 0x0406 (Disconnect) -- send request failed (err=0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))
7/24/14 12:25:16.000 kernel[0]: [0xffffff8080a72000][clientDied]
7/24/14 12:25:16.000 kernel[0]: [0xffffff8080a72000][clientClose]
7/24/14 12:25:16.000 kernel[0]: [0xffffff8080a72000][free]()
7/24/14 12:25:21.000 kernel[0]: ### ERROR: opCode = 0x0406 (Disconnect) -- send request failed (err=0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))
the headphones are connected: I see a steady blue blinking light on the multifunction button on the earpiece.
What can I do to fix this?

It's a third-party application. I suggest you contact the developer for technical support. These forums only provide support for Apple products.
The application may simply be incompatible with the version of OS X you are running.

Can't pause flash with right mouse click on mac osx 10.6 after update from firefox 3 to 6

After updating my firefox 3... to firefox 6 I can no longer right click in a flash video and pause it

My camera is a 1Ds mk II..
and for that one it says
All versions tested. All versions tested. Supported only through Lightroom 4.1.
however, it also says
Windows XP, Vista, 7; Mac OS X 10.5 or 10.6
which is plain wrong, because Canon never supported any drivers for Windows Vista or Win 7, not to speak of XP 64bit. (You cannot connect the camera via firewire, without the device drivers!)

Logitech bluetooth mouse not found on restarting Mac Pro

hi
for some time now I have been using a logitech V270 bluetooth mouse with my Mac Pro which has a bluetooth 2.0 card installed. all works fine except that when i restart my Mac Pro the mouse is generally not automatically detected and i get the 'bluetooth mouse setup' screen with the message 'there isn't a mouse connected'. i then need to press the reset button on the mouse and go through the usual connection procedure.
i wonder i anyone has any advice as to how i can get this set up so that the Mac Pro automatically connects
thanks
nick

Hello all -
I found a solution to this by using Bluetooth Explorer. I had previously tried this and it didn't work, however I realized that I was using an old version of Bluetooth Explorer! When I downloaded the newest version from apple, it worked like a charm and I was able to select which Bluetooth adapter I wanted to use. Switched it over to the USB dongle and it works perfect now. No more skipping mouse, woo hoo!

Mouse/program freezes in Mac OSX Mavericks

I recently updated my 2.8 GHz Intel Core i7 iMac to Mac OSX Mavericks (8GB RAM).
I'm using an Apple wireless bluetooth mouse and keyboard.
I'm now getting frequent freezes. The cursor can be moved but I am unable to write or click on any window. Only way to resolve this issue is a hard reboot.
Additionally, programs (Safari, Microsoft Office) sometimes freeze/stall with the spinning beach ball.
Overall the system is much more sluggish.
Any suggestions ?
I'm wondering if these problems are related to syncing services, e.g., Adobe Updater (really annoying when it interrupts/blocks workflow daily with another update check) or iCloud and Dropbox (check mark indicates up to date) - although superficially I don't see them active at the time of the freeze.

Hi farpelix,
Thanks for visiting Apple Support Communities.
If your Mac is unresponsive and you think it may be related to software you've installed, try testing by booting into safe mode and creating a test user:
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455
If your system is responsive is responsive safe mode, this usually means OS X is fine, and the issue is caused by conflicting software in your user account.
Next, see if it behaves normally in a new user account. The steps in this article also apply to creating a new user in Mavericks:
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468
Best,
Jeremy

I have a iMac its Bluetooth is not working. I need a Bluetooth Adapter for it. I am using Mac OSX 10.9

I have a iMac (Not under warranty) its Bluetooth is not working. Blue tooth Hardware is failed and Replacement is huge cost,I need a Bluetooth Adapter for it. I am using Mac OSX 10.9

Apple used to recommend this but now say it's not compatible.
OWC have IOGear GBU421W6 Bluetooth 2.1 USB Micro Adapter and IOGear GBU321 Bluetooth USB Adapter, & should be able to confirm whether or not they'll work for you.

Elements 9 Organiser Mac OSX swiping Mouse

How do I stop Organiser moving between thumbs when I swipe the mouse with my finger? I've switched this off in Mac OSX system preferences. How do I switch it off in Organiser?

There isn't any mouse related preferences in Organizer. Please make sure that 'Move content in direction of finger movement when scrolling or navigating' option is unchecked.
~Andromeda

Bluetooth modem with Mac OSX 10.5.x

I have been using bluetooth modem of E51 and N70 with Mac OSX 10.4.x, it has been working really fine.
Last week I updated Mac OSX to 10.5.2. iSync works well with Nokia_E51_1v1.dmg. But, bluetooth modem doesn't work well...
Actually I can connect internet with the modem script that is distributed at http://www.taniwha.org.uk/. But, after connecting, OSX said sooner that "The connection was terminated by the remote site. Please try again."
According to ppp.log, before connection terminated ppp.log records "Modem hangup"...
I am puzzled the problem. Please let me know how to do configuration to connect the internet with bluetooth modem on OSX 10.5.x

I compared the ppp.log in Tiger and in Leopard and I figured out that Leopard sent IPv6 packet after connecting the internet.
When such situation, we can apply "networksetup -setv6off Bluetooth" in console to solve the suddenly disconnection problem.
Now the bluetooth modem of E51 works really fine!
Sincerely,
chiro

Reinstall mac os 10.6.4 using a bluetooth mouse?

Hi. I would like to know if I can reinstall mac 10.6.4 ( while doing a disc format ) using my bluetooth mouse and keyboard. I read somewhere that you should use a wired mouse. Is it true?

Download and install the combo update from here:
_http://support.apple.com/kb/DL1048_
Of course when I suggest that, I assume you have some sort of high speed internet available to you?
Joe
Message was edited by: joeuu

Bluetooth mouse and keyboard go off exactly the same time, and don't connect agian after ive installed the mac os x 10.8 updates please fix this apple

After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
I hope apple fixthis problem in there next patch update.

Hi,
Welcome to the  Discussions
Does the App launch form the Applications Folder rather than the DOCK ?
The icons in the DOCK are links to the App. Sometimes this link can get broken.
8:37 PM Sunday; December 27, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
How can i fix this problem ?
En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
Comment corriger le problème ? Merci à l'avance.
Réjeanne Blouin

Hello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???

I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???

There is a fix; I finally discovered how to clear the Windows 7 xx64 Device Manager's warning of a missing Bluetooth Peripheral device.
Thinking Boot Camp 4.0 would correct thid, I installed it ititially today only to have the warning remain.
The Bluetooth company called Broadcom (you notice the reference during the installation of Boot Camp) offers a BlueTooth "device finder" (my phraseology) that detects all BlueTooth devices in your Apple or PC but withing a Windows operating system; included are Windows 7 , Vista, XP and even 2000 operating systems.
So download the 3 MB file, from Broadcom.com. While your Bluetooth equipment is plugged in to the computer, run the program. The program searches for any BlueTooth peripheral activated equipment and BlueTooth devices that makeup your MacBook Pro, or other Apple or a plain PC computer having a Windows operating system installed. It then downloads the appropriate software required.
The company's URL address:
http://www.broadcom.com/support/bluetooth/update.php
In my case, I ran the program, rebooted my MacBook Pro (in Windows 7 x64 and with the new Boot Camp 4.0 installed) and the missing BlueTooth peripheral device indication was eliminated. It took 10 minutes to complete.

Bluetooth Mouse X7500 on MAC OSX

Similar Messages

Maybe you are looking for