Bluetooth network access

trying to pair my iPhone (iOS 8.1) to the iMac (Yosemite) via bluetooth.  The pairing won't work, and I keep getting a message on the iMac that network access needs to be set to allow the pairing---where do I enable the pairing in "network access"?
After more trying, I'm now able to get to the point where the access code for bluetooth pairing pops on the iMac, and also on my phone, but when I confirm the codes match on my iPhone, the iMac tells me that the connection cannot be made.  Any suggestions?

It doesn't need to be paired.

Similar Messages

  • E51 Bluetooth Network Access Service unavailable (...

    I used to have a 6300 and just got a E51. With the 6300 there is a bluetooth service called 'Network Access' that enables a laptop to use the phone's GPRS capability to access the Internet.
    My problem: This service does not seem to exist with the E51. Is this correct? If no, what do I need to do. If yes, how can the E51 be used to provide (fast) Internet access to a laptop (via Bluetooth)? (I am not talking about 9.6kbit modem dial-up connections.)
    To illustrate what I mean: In Windows XP open 'My Bluetooth Places'. From the left column start the 'Bluetooth setup wizard'. Pick the first option 'I know the service I want to use...'. Select 'Network Access'... and experience the problem that the E51 is not found to be providing this service (to prevent the obvious question: The Bluetooth connection and pairing works fine otherwise).
    I am hoping that I am missing something obvious here...

    Why are you trying to connect your iPhone to your computer? The only thing you can do with that is streaming the internet to your computer. Is this what your are trying to accomplish? If yes, try setting up the hotspot on your iPhone with WiFi and see if your computer can find it and connect.

  • Bluetooth network access not happening

    i have a 845e max2 blr
    p4@ 2.4 ghz 533fsb
    256 mb kingson ddr
    10gbhdd
    intel pro ve 100/10
    matrox mga 400 16mb
    win98 se
    Other is acerpower 4300
    celeron @400Mhz
    ram 32 mb6.4 gb hdd
    win98 se
    sis chipset 7001
    (it is the the node which is conneted to my network using static ip system using a physical nic with tcp/ip as well as netbios)
    i have setup the blue tooth application ver 1.2.4 on my two pcs win 98 se.
    following instructions of bluetooth guide i installed transrecieving key in Acer system, also i installed winroute lite   configured it as per guide & also configured the blue tooth server adapter @192.168.1.1 in network properties  & subnet @255.255.255.0.
    I have instaleld bluetooth bracket & antenna & set up that MSI board based system as client.
    both the pcs are able to discover eachother
    all the services  are running by automatic means .
    I attempt to connect using network access using my msi based system. evey time i get the same response that :connection could not be completed or error connecting to (the name of other computer)
    i  have disabled all the authentication authorisation & encryption at all levels.
    transmit power is : high
    also i enabled acces using dial up server window on server pc using transrecieving key i made it allow called access s & also disabled require encrypted password & made the server type as ppp windows 98 server.
    after that i did it viceversa i.e i made the msi based based board the server pc & acer system aas client still afer initiating & discovering the services i try to connect &  get the same error messages.
    I am in complete mess.
    please help!!

    Depend the model of your Mac doesn't work,  I have iPhone 6  iMac mid 2011 and MacPro 2012 and doesn't work,  the problem is the version of Bluetooth,  you must have a  Mac from  mid 2012  or version bluetooth  4.0

  • Network access enabled trying to connect bluetooth with iPhone 5

    im trying to connect iphone 5 bluethooth with my macpro and it keep saying ''make your network access enabled''

    You cannot use BT for file transfer.
    See the support BT profile:
    iOS: Supported Bluetooth profiles - Apple Support

  • Network access is unavailable to activate my bluetooth to connect with my iPhone

    i have always problem with connection between my iPhone and mac every time i tried to connect with my iPhone from my mac there was message pop up said that " make sure your network access is enabled", can you please find solution for me

    Why are you trying to connect your iPhone to your computer? The only thing you can do with that is streaming the internet to your computer. Is this what your are trying to accomplish? If yes, try setting up the hotspot on your iPhone with WiFi and see if your computer can find it and connect.

  • LAN settings for HP LaserJet 500 Color MFP M575: printing OK, network access NO

    Printing OK but Network access NOI have a M575 in office LAN.IP 169.254.204.142Subnet 255.255.255.000Router 169.254.204.1Other computers 169.254.204.2-100Everything was good. But couple days ago I was not able to connect to my HP from browser. I was check settings and: IP address on screen HP - 0.0.0.0 I can printing on my HP!!! (destination of printing is: HPLaserJet500ColorMFPM575)but can’t to change settings. I can't change IP adres in JETDIRECT printer's menu. In command prompt PING of 169.254.204.142 is OK… Hand settings IP on start (1/8 click ), searching in administrative menu, cold reset… nothing I don’t know what I can to do else.

    This is my IPConfig screen:C:\>IPConfig /all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : T420
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Peer-Peer
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Bluetooth Network Connection 2:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
    #2
    Physical Address. . . . . . . . . : 60-D8-19-D8-A4-3B
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Local Area Connection 6:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
    on
    Physical Address. . . . . . . . . : 00-21-CC-66-CA-38
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::385f:1def:62ae:8cd5%75(Preferred)
    IPv4 Address. . . . . . . . . . . : 169.254.204.2(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 29 xxxxxxxxxxx 2015 15:25:46
    Lease Expires . . . . . . . . . . : 30 xxxxxxxxxxx 2015 15:25:46
    Default Gateway . . . . . . . . . : 169.254.204.1
    DHCP Server . . . . . . . . . . . : 169.254.204.1
    DHCPv6 IAID . . . . . . . . . . . : 1610621388
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-69-54-50-00-1E-37-1A-5A-E8
    DNS Servers . . . . . . . . . . . : fe80::5ef9:6aff:fedf:5f3b%75
    169.254.204.1
    169.254.204.1
    NetBIOS over Tcpip. . . . . . . . : Enabled
    Wireless LAN adapter Wireless Network Connection 2:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6205
    Physical Address. . . . . . . . . : A0-88-B4-D2-3E-B0
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 57:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft 6to4 Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{32EA8AA7-0304-411D-9B3C-9BE6D6E53F7D}:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 135:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{0E880DF2-FD27-4BF8-BBD9-EA726316C1FE}:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{FFBD17DC-A12B-469A-8135-C63D9BBEBB31}:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter #6
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    C:\>

  • Attempting to connect my MacBook to my 4s iPhone.  I have had them connected in the past to use the "hand off" function. Today it tells me "network unavailable"  make sure network access is enabled.  I don't know what to do.

    Attempting to connect my MacBook to my 4s iPhone.  I have had them connected in the past to use the "hands off" function. Today it tells me "network unavailable"  make sure network access is enabled.  I don't know what to do. I love the hands off feature as my iPhone is never with me when on my mac! I'm not sure what to do.  Both are "discoverable" via bluetooth and show up on each device but when I try to connect it says "network unavailable".  HELP!

    An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • Can two bluetooth headsets access the ipad at the same time, for example, to watch a movie together on an airplane trip?  does bluetooth work when the ipad is in airplane mode?

    can two bluetooth headsets access the ipad at the same time, for example, to watch a movie together on an airplane trip?  does bluetooth work when the ipad is in airplane mode?

    This article: http://www.iphonefaq.org/archives/97903 helped to clear up confusion I had re your point
    when Airplane mode is on you can turn on either or both wifi and bluetooth
    It makes it clear that airplane mode turns off processes involving cellular networks, which doubtless involve rather strong transmissions, while allowing others such as wi-fi and Bluetooth.  I'm puzzled though why the iPod rather than the iPhone has the airplaine mode when it has no cellular capacity.  Perhaps it's there but doesn't actually do anything other than making it possible to conform to a request to switch into airplane mode, and display an airplane icon to satisfy flight attendants who are checkng up on you!

  • My laptop is showing no network access whenever i try to connect

    Hello,
    Am a new comer here, and am from Nigeria. I have an issue with my laptop since two to three weeks ago. I can't connect to internet since two to three weeks ago, whenever i try to connect either through wifi or modems, it always give me no network access at the base of network icon.
    Can anyone help me out as i have tired everything i can. There is 802.11n Wireless LAN Card, Bluetooth Device(Personal Area Network), Bluetooth Device(RFCOMM Proyocol TDI), Microsoft Visual WiFi Miniport Adapter and Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20) installed on my laptop.
    Thanks

    Try Settings>WiFi>Your network Name>Forget this network. Then go back to Settings>WiFi>Your Network Name. You should get the option to enter the password again.

  • Connect to internet, not via 3G, but via bluetooth network connection

    I am considering buying this iphone,
    and there are many options I can use to connect internet.
    so can an iphone connect to internet, neither via 3G nor via wi-fi, but via bluetooth network connection?

    The iPhone does not support tethering - at the present time anyway, which means using the iPhone as a modem for internet access with a computer, and the same in reverse - using a computer's internet connection to connect to the internet with the iPhone.

  • How to set up a bluetooth network?

    When attempting to connect to an iPhone via bluetooth, the following is presented "network is unavailable - make sure network access is available". How is that done?

    Just trying to find out what a bluetooth connection might offer.

  • Acs 5.3 and wlc 2504 config with restricted network access

    Hello,
    i submit you the following issue that i'm actually facing:
    i must configure a secured wireless network with access restriction based on SSID. the equipements are : cisco wlc 2504 (soft 7.3) cisco secure acs aplliance 1121 (soft 5.4) .
    the users that will connect to the network are regrouped by identity groups, each identity group having it's own SSID. Clearly each group of users must access only one SSID.
    i followed the procedure below to configure it:
    -- creating user identity groups;
    -- creating users and assigning them to the groups;
    --- creating authorization profiles for each SSID under policy element/ authorization and permission/network access/authorization profiles and putting the Airespace-Wlan-Id(the SSID number) in the radius tab.
    --- assigning the authorization profiles to the identity groups under access policies.
    after all these config the users can access the network using there userid/password configured. But the problem is Every user can access every SSID, seems like the restriction is so not very well configured.
    i found some documentation on this kind of config but the version of ACS used seems older than the one that i use, so menu are very different.
    Please can someone provide with the right steps to follow to achieve this kind of config.
    tkx in advance

    Yes.. you only have to add the end filter like what I posted... as far as the calling station id in the WLC security tab, it doesn't matter because that is not used when using 802.1x.  I would also try to not enable everything that you have just to start from the basic and make sure it works first.  The WAP Authentication Method might or might not work for you.  Uncheck that for now and when you have a successful authentication, look at the monitor log and see what radius attributes are being sent, because those attributes is what you can use to build your policies.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • ACS 5.3 - 11033 Selected Service type is not Network Access

    I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3 
    I understand that by default, ACS only supports TACACS for device administration.  So I'll get this error when trying RADIUS:
    11033 Selected Service type is not Network Access
    Description:
    RADIUS requests can only be processed by Access Services that are of type Network Access
    Resolution Text:
    Verify that the Service Selection Policy rules are correct
    However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.  Any Ideas?

    If you use the protocol as radius you can not use a device admin service. You can only use network access. That will allow you for authentication to the devices.
    Regards,
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • ACS 5.3 cannot create default network access authorization rule

    Hi, when I click 'Create...' under Access Policies > Default Network Access > Authorization, and then press the 'OK' button, it says 'Please configure at least 1 condition.' However I have no way to configure conditions as the 'Conditions' text is just bold text and not a link or any sort of configurable area. If I go to 'Customize' on the bottom right and add conditions to the right list box, I still have no options when I press Create. Also, the 'green light' next to Default Network Access is grey with a line through it. This is the most cryptic system I have ever used.. anyone have an idea? Thank you!

    Looks like you are using chrome amd it's not a supported browser.
    Supported Web Client/Browsers
    You can access ACS 5.3 administrative user interface using the following Web Client/Browsers:
    •Windows 7 32 bit
    •Windows XP Professional (Service Pack 2 and 3)
    •Windows Vista
    •Internet Explorer version 7.x
    •Internet Explorer version 8.x
    •Internet Explorer version 9.x
    •Mozilla Firefox version 3.x
    •Mozilla Firefox version 4.x
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp222016
    Jatin Katyal
    - Do rate helpful posts -

  • Network access and internet

    Is it possible to allow network acces to devices and to internet only for domain clients? So if someone brings his personal laptop to work and connect it by cable to network he can not acces nothing on network or internet?
    Solution with proxy is not good for me, so I am searching for something else.
    I never left an open problem....I search, dig and ask, until it's solved....

    Hi,
    >>Is there a way to lock just DNS to AD clients?
    Before going further, how was our network set up? Do we use DHCP to automatically assign IP addresses to clients? If we use DHCP server to automatically assign IP addresses, the computers connected to the network will automatically get
    their IP address and DNS server IP address if we don't have a network protection mechanism to restrict which computer can get IP address from DHCP server. In this situation, although we know that you don't want to use Network Access Protection to do this,
    as far as I know, this should be the solution which can best meet our target.
    Besides, for this is more related to network, in order to get better help, we can also ask for suggestions in the following network forum.
    Network Access Protection Forum
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverNAP
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for