Bluetooth no longer connects on iPhone 5

I have tried to connect my iPhone 5 to various bluetooth devices, 2 music players, 1 headset all of which in the past have connected.  I'm not sure when they stopped connecting because I don't use them that often but I would guess it has been in the past week or so.  Now nothing shows up as a saved device in my bluetooth menu on the phone and when I try to reconnect them nothing is sucessful.  I have tried turning bluetooth on and off, restarting the phone, restarting the device but to no avail, still get an error on the phone telling me to make sure the device is discoverable and in range.  So I tried to connect with my wife's iPhone 5 and instantly connects without issue to each device.  I am trying to do a restore my phone plugged into iTunes but iTunes now tells me it can't backup my phone because of an error (no other information).  My wifes phone backsup to the computer over wifi without an issue.  I have over 13gbs of pictures in my camera roll that I don't want to lose and I don't want to pay iCloud's storage fees just to get this working again.  Any suggestions? 

We have a 2011 Buick Enclave and the Pairing worked.  I did have to hold the phone button, say Bluetooth, Say Delete, Say the specific device to Delete ...The Pair, I think enter the code (which changes each time you Pair) and then Name the New paired Device.  To test it, I typically have to turn the vehicle off, leave the vehicle and walk far enough away to make sure the phone is not paired.  While away, tune the phone totally off.  Turn the phone back on, enter and turn key far enough to have the electrical systems come on, and then push the phone button in the car.  Good Luck.

Similar Messages

  • When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

    when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
    In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
    Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
    Any ideas - solutions - comments please?

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • HT1369 with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

    with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

    Hello wendellfromva,
    The following article provides tips that can help get your iPhone to reappear in iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • When i try and open itunes a memo pops up saying "itunes could not connect to this iPhone. This device is no longer connected" my iphone is not plugged into my mac so i dont know why its mentioning an iphone nor why i cant open my itunes library

    when i try and open itunes a memo pops up saying "itunes could not connect to this iPhone. This device is no longer connected" my iphone is not plugged into my mac so i dont know why its mentioning an iphone nor why i cant open my itunes library?

    Each time you connect your iPhone to iTunes, you need to eject it before closing iTunes by clicking on the little "eject" icon shown in iTunes.  It seems that sometime in the past, you did not do that.
    I'm not sure how to undo the previously done damage, but maybe a reboot of your Mac would help.

  • Can u connect 2 iPhones via Bluetooth, Can u connect 2 iPhones via Bluetooth

    Can u connect 2 iPhones via Bluetooth, Can u connect 2 iPhones via Bluetooth

    Unfortunately, you can't.  The iphone does not have the protocol for Bluetooth file sharing and so forth, between one iphone and another.

  • IPad Bluetooth no longer connects to speaker

    iPad Bluetooth will no longer connected to speakers

    Try a reset by holding the power and home keys down until the Apple logo appears.
    Barry

  • Can you no longer connect an iPhone to an iPad transfer photos?

    Hey all, I used to connect my iPhone 4s to my iPad 2 via the camera connection kit to transfer photos to the iPad. When connected the iPhone would show up just like a camera SD card in photos. With the new iPad 3 or new ios update this no longer seems to work. I get an error that this accessory is not supported (when I connect the camera connection kit to the iPhone). Can anyone else confirm this is the case or is there something wrong with my camera connection kit? Cheers.

    Sach160,
    I noticed in your post you stated the camera kit is connected to the iPhone, not the iPad. When I tried it this way I don't get an error message, but nor do I get any interaction between the two devices. Did you normally insert the camera connection kit directly into the phone? If so, try the camera kit to the iPad and run the USB cable to the iPhone's 30-pin connector instead. This way works for me w/ no issues.

  • Bluetooth no longer works between iPhone 5 running iOS8 and my 2012 Buick LaCrosse

    Since I uploaded the new iOS 8 on my iPhone 5 the Bluetooth connection is no longer working correctly in my 2012 Buick LaCrosse.   The phone pairs (illuminating the Bluetooth icon in the car stereo display) however then it doesn't work.  I cannot receive calls or can't make calls.     The iPhone display shows "Calling" and the number shows, but nothing happens. 
    I tried the suggestion from ChrisJ4203 below, however it did not work for me.
    “Go into the phone and remove the vehicle from the Bluetooth list. Turn Bluetooth off, and do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Then go into the vehicle and remove the iPhone from the list of paired devices. Turn the vehicle off and then back on again. Place the vehicle's system into discovery/pairing mode. Go into Settings on the phone and turn Bluetooth on. The devices should see each other.”
    Any other ideas?   My iPhone worked fine from Jan 2012 to now in this same car.

    We have a 2011 Buick Enclave and the Pairing worked.  I did have to hold the phone button, say Bluetooth, Say Delete, Say the specific device to Delete ...The Pair, I think enter the code (which changes each time you Pair) and then Name the New paired Device.  To test it, I typically have to turn the vehicle off, leave the vehicle and walk far enough away to make sure the phone is not paired.  While away, tune the phone totally off.  Turn the phone back on, enter and turn key far enough to have the electrical systems come on, and then push the phone button in the car.  Good Luck.

  • Since iOS 5.1.1 and OS X 10.8.1 bluetooth won't connect my iPhone 4 and my iMac

    Recently updated my iMac to 10.8.1. My iPad 2 and iPhone 4 have both been updated to iOS 5.1.1. Today I tried connecting them both to my iMac via Bluetooth. Had great difficulty connecting the iPad, but eventually connected after numerous tries. The phone, however, refuses to connect. I've done some Web searches including the forums here, but haven't found any solutions. Does anyone know what's causing this and how to fix it?

    Sorry, but we are not allowed to discuss any beta software in these forums - per the FAQ's and the terms you agreed to (confidentiality), you cannot discuss any aspect and need to contact Apple and/or file feedback.

  • Ios 8 update, on 5s, Bluetooth no longer connects to my 2012 mini

    My iphone 5s was working perfectly fine with my mini before the update my 4s before hand too.  While I can plug it in and listen to music it just will not connect to my car or when it finally does it drops out as you try to make a call. This has to be an IOS 8 fault right? A guy in the apple store says its down to the manufacture. I called mini who replied with "obviously its to do with the update nothing we can do". I tend to agree with mini.
    Is anyone else having the same problem?

    Welcome to the Apple Community.
    Check your contacts aren't in another group other than iCloud, only iCloud contacts will sync.

  • TS2756 Why does car bluetooth keep losing connection to iphone

    Since updating ios software my car does not recognise my iPhone and I have to manually connect each time I get in the car.  I have told my phone to "forget device" and re-paired as if for the first time but this has not helped. Nothing else has changed except the software update.

    Reboot the router (unplug everything)
    If that doesn't work...
    Open Network Utility (Applications > Utilities)
    Navigate to the Ping tab
    Type in a website (youtube works well for me)
    Do unlimited pings
    Then click the Ping button
    See if that helps your connection

  • Nano 7th G bluetooth no longer connects

    I just bought the Nano 7th Gen about 3 weeks ago. It would link automatically to the Sync in my car and although sometimes I had to fiddle a lot, I was able to get it to link with my headset LP HBS-700.  Now it won't recognize either device. I tried unpairing the headset, but now it won't even find the device, again. Is there anything I can try to get this to work again.

    Make sure your headset is in pairing mode before attempting to pair again to your nano.

  • After ios 8 update i can not connect my iphone 5s to laptop

    after i up dated to ios 8.0,2 i can no longer connect my iphone to my computer.t get usb device not recognized

    Hi beiniam, 
    Welcome to the Apple Support Communities!
    I understand needing your iPhone to connect to iTunes and the frustration of the connection not working as you would expect. In this type of situation I would recommend the troubleshooting steps located in the attached article. 
    iOS: Device not recognized in iTunes for Windows
    Have a great day, 
    Joe

  • Is anyone having problems with jawbone connections to iphone 5?

    My jawbone bluetooth device only connects to iPhone 5 when it's in very close proximity - if I put phone in my pocket the connection cuts off.  Is this normal? or what is the problem?  This phone?  Hardware issue???

    I am having the same issue. My iPhone 5 is on Verizon and my daughters iPhone 5 is on Sprint. Cannot do anything.

  • HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

Maybe you are looking for