Bluetooth no longer pairs with Acura TSX

I have had an Acura TSX since September 2012. The bluetooth on my iphone paired fine, and continued to work okay after I got the iphone 5 in October. However, a few months or so ago, it randomly "unpaired" from the phone. I was able to "forget the device" and repair it. Unfortunately, it unpaired again this week, and after telling the phone to forget the device again, the car can no longer find any bluetooth enabled devices when I try to pair it. Sometimes, the "handsfree" link will come up and ask me to pair, but when I put in the pin, the car will say that it couldn't find a bluetooth. I've turned the phone on and off, and the bluetooth on and off, and nothing happens. No idea if this is an issue with my car or with my phone. Any help would be much appreciated, thanks!

Unpair the car from the iPhone (Settings -> General -> Bluetooth) and unpair the iPhone from the car (check your owner's manual).
Typically you just have to unpair and re-pair the iPhone with the car and you're back up and running.
http://support.apple.com/kb/HT1664 might help too.

Similar Messages

Iphone 4 no longer pairs with acura tl

Since I downloaded the new 4.3 firmward I can no longer pair my iphone with my 06 acura tl. It stays in discovery mode till it times out. Is there a work around for this?

Unpair the car from the iPhone (Settings -> General -> Bluetooth) and unpair the iPhone from the car (check your owner's manual).
Typically you just have to unpair and re-pair the iPhone with the car and you're back up and running.
http://support.apple.com/kb/HT1664 might help too.

Why is my Bluetooth no longer pairing with my iPhone 5?

Why is my bt not pairing with my iPhone 5? I've tried everything,but nothing works.

Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

Apple Wireless Mouse - No Longer Pairs with Mac Mini?

Hi there,
I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
I replaced the batteries, but nothing changes.
Help!

Normally that's caused by debris under the trackball preventing the rollers from moving. Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth.
The symptoms are usually that scroll will work one direction but not the other.
Captfred

I upgraded iPhone 6 to IOs 8.1.3 and I can no longer pair with my 2015 Toyota Highlander. Upgraded to 8.2 and it still doesn't pair

I upgraded my iPhone to iOS 8.1.3 and can no longer pair with either the phone in my 2015 Toyota Highlander or my Jawbone earpiece. Upgraded to iOS 8.2 and still no resolution for the car, but now my Jawbone will finally pair with the iPhone. Is this a known problem or do I need to get a different phone?

Hi. You can reset the connecting system on your car to try or make sure if password's verifying is needed to connect.

IPhone 4 Bluetooth will not pair with Jawbone Icon, Jawbone 2

Just got my iPhone today and am more or less thrilled to have it. The only problem (other than the antenna issue, which the bumper fixes beautifully) is that Bluetooth will not pair with any of my Bluetooth devices. When I turn on Bluetooth on the phone and turn on the headset, iPhone says it's "searching.." and "now discoverable" but it never discovers anything, let alone pair up. The Bluetooth on my MacBook recognized the iPhone and I was able to pair them, but no luck on the Jawbones. Sounds like a JB problem, but I'm wondering if anyone has had this problem and if there's a fix via the iPhone.

On the icon, turn it off and hold button down while sliding the power switch on. This should put it in pairing mode. Then go into your i4's bluetooth menu and give it another go. Also, Jawbone has recently updated the firmware for the Icon so you need to load it as well. I have the icon and a Jabra cruiser and both work/paired fine. You may want to try rebooting phone and retrying as well.

HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

Lots of people having this problem? Hmm. For what it's worth I haven't seen that problem on my iPad 3
This is a user to user forum so no one here would have any idea whether there is a real problem and, if so, whether Apple is working on a fix.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

If JAWBONE bluetooth headset cannot pair with my iphone

if Jawbone bluetooth headset cannot pair with my iphone but able to pair with another iphone, is that bluetooth issue with my iphone, thanks?

Possibly - but, are you certain you are properly putting the Jawbone in discoverable mode? You must do that to pair it with the iPhone. A Jawbone headset certainly can be paired with the iPhone. Have you tried pairing any other headset with the iPhone?

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
Bluetooth Device Details.
Devices (Paired, Favorites, etc):
FIPO:
Name: FIPO
Address: 00-07-88-a0-12-ce
Type: Headset
Services:
Paired: Yes
Favorite: Yes
Connected: No
Apple Bluetooth Software Version: 1.9.0f8
Hardware Settings:
Computer:
Address: 00-14-
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Desktop Computer
Composite Class Of Device: 1057028 ($102104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 129 ($81)
Requires Authentication: No

You may have to enter device code like 000 in phone so it can pair up.
Try checking the box you mentioned
Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
Try turning on Bluetooth just as phone is put in search mood.

My i phone 3g s bluetooth does not pair with any phone

my iphone 3g s bluetooth does not pair with any otther i phone, i pad or other phones.
how can i solve the problem
thanks
sajalrm

There is nothing to solve. Pairin with another phone is not a supported BlueTooth protocol. The exception being pairing for some multi-player games.
Stedman

DROID Charge Bluetooth Sync With Acura TSX (Handsfreelink) issues

I have an Acura TSX 2011 w/Tech Package. I have a lot of trouble with pairing this Samsung Charge with the TSX. I had samsung Omnia Previously and there were no issues with pairing that phone with this car. However, Samsung or Verizon must fix this issue completely for Samsung Droid Charge, or I have to pursue legal channels to obtain compensation. There is no way I am letting verizon or Samsung off the hook.
If I can't use Bluetooth (one of the most basic functions now on any Smartphone) I have to either hold my phone in my hand while driving or use speakerphone (also have to hold that while driving). In Connecticut, it is illegal to drive while on the phone at the same time. If Verizon cannot get this issue fixed, then I have to report this to the Attorney General and seek legal remediation because verizon is legally obligated to provide phone that supports handsfree in Connecticut and that includes Bluetooth.
Hopefully someone at verizon is reading this.
Good Day!

Ok I do not have a 2010 TSX tech but I tried it in a 2011 TSX tech and guess what! it worked on that one also. I would like to reflect back to when I was all over this forum complaining about my Bluetooth issues. I have a Pioneer navigation system in my car that has bluetooth calling and audio capabilities. When I was swapped out from the Thunderbolt to the Charge I was very disappointed to find that my new Charge would not work on my Pioneer and my Thunderbolt was perfect. I excepted it because I hated the Thunderbolt so much at the time because I just wanted a phone with a good data connection and no rebooting. So after sadly entering my car for weeks on end without being able to use my bluetooth audio I just decided to try it again. This time magically it work and has ever since. The VZW peeps were glad to hear this because it would be one last thing I was jumping down their backs about but I was sadly disappointed that they didn't take an interest as to why weeks later I have a connection. This seems to be the case also with these TSXs because I drove a few and again was angry that they didn't work but today as I go out and try to give you a gleam of hope I find that ( aside from some slightly poor audio quality ) the dang thing is working. So I guess it's up to the Samsung Bluetooth gods to decide if they are going to grant you your Bluetooth wishes. Wish I was more help but it looks like you're either going to have to deal with it, get a different device, or pray for a cure.
ChristinaB_VZW From what I gather from all this is maybe when you send this info to product investigations tell them to try a new device and not one that has been used. Just a thought but even a used one should have the popping crackeling noise coming through. So I guess there are two issues. Thanks G

After ios 5 update, bluetooth on ipod touch not funcioning-keynote app no longer pairing with ipad

Since the ios 5 update--bluetooth longer funcioning on ipod touch. iPad no longer syncing with keynote remote app on ipod touch. My iPad no longer sees the iPod touch. The Bluetooth indicator does not come on or flash on the ipod touch.
any help or suggestions?

alex.g wrote:
I've got a fix, even for those who don't have hotspot (like me) who want to get the ipad and iphone talking over bluetooth again.
First, I should say that I said when I got my 4s, the problem was solved. It was not. I was just connecting via wifi, but I wanted bluetooth back.
Here is how I got it back without hotspot.
1. Launch keynote on one device and the remote on the other as you normall would.
2. Find another app that bluetooth links ipad and iphone (I used 'pictransfer light'). Install on both devices and launch on both devices. Follow the promt to get a bluetooth sync.
3. Double push the home button both devices to pull up the multi-tasking and open keynote and keynote remote on the relevant devices.
4. In keynote, go to settings; advances; remote. You should now be able to get the remote to link (you may, on the device running the remote, need to hit settings and then 'new keynote link'.
Once I launched pictransfer, the bluetooth logo was blue on both devices the whole time I ran through the other steps. I suspect that that was also the point of using the hotspot service.
Also noteworthy: I am yet to try this 'in the field'. For all I know, this won't keep a connection for as long as one might need. I'll find out on Thursday when I rely on the remote for 90min. On the positive side, I was able to keep the connection even when I double clicked home and closed pictransfer while leaving keynote and keynote remote open...
This work-around worked -- I found that as long as I launched the "Pictransfer for iPad Lite" app just before the presentation that it seemed to work fine. However, if Bluetooth gets turned off or you disconnect I think you will have to repeat the work-around -- nice find.
Apple really needs to fix this. They even have a posted document describing how to link two devices by Bluetooth and the truth is that it just does not work as they say. They need to add whatever code into the Keynote & Keynote Remote apps to initiate bluetooth to connect the devices. It's fine if it prefers WiFi, but it should give you the bluetooth option as well.

My iphone will no longer pair with my blue ant st3 bluetooth

We just upgraded an ipone 3 to an iphone5 and it will not pair with our blueant st3 bluetooth. My iphone4 is paired with my other blueant st3 and works fine. If I go into settings on my iphone4 and selett bluetooth it tells me the device is not compatiable and asks if i want to forget the device, after I reboot the iphone4, all is well. My iphone4 is running V6.0.1 and the iphone5 is running V6.1. Any suggestions?

Mark your above reply as Solved so that others searching for this issue will find the Solution.
Cheers.

Bluetooth No Longer Working With Headset

I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

jrnet154 wrote:
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
Press and hold the button on your headest to call up Siri.

Bluetooth no longer works with Toyota

After the 2.01 upgrade, the bluetooth connection with my Toyota Sequoia no longer works. It will pair but will not be recognized.

Actually, I'll bet you can get it to link-up, but indeed, since V 2.0.1 mine doesn't automatically link anymore, the key word being "automatically". I discovered that you can manually force it to be recognized in my 2007 Toyota Prius, but you have to re-enter the 4-digit pass code every time you start the engine. Try this: On your iPhone, go to Settings/General/Bluetooth, and un-pair your Toyota device (which the default is "Hands Free". Then, from the Toyota's main phone screen: Settings/Bluetooth/Register. Finally, enter the 4 digit code shown, into the iPhone, which by now should be looking for that code.
Again, this is just a one-time work-around, which unfortunately must be repeated every time, until someone figures out how to restore the automatic linking.

Bluetooth no longer pairs with Acura TSX

Similar Messages

Maybe you are looking for