Bluetooth no longer sees iPhone after IOS 5 install

After completing my iOS 5 installs for both my 3GS and iPad 1, I can no longer pair my iPhone with my iPad. Has anyone else had a similar problem? Oh yeah, I cannot sync my ipad with iCloud, even after doing a system restore on my iPad.
Epic fail of the rollout, Apple.

Do you have "Personal Hotspot" in your Settings on iPhone 4? Do you have tethering active with your carrier?
For many who upgraded their iPhone's to iOS Personal Hotspot got hosed. On the phone, goto Settings -> General -> Reset -> Reset Network Settings and then reset the device.

Similar Messages

Car Stereo No Longer Recognizes iPhone after iOS 7.1 Update

I connect my iPhone to my car stereo with via USB (the stereo doesn't have bluetooth) and now after the iOS 7.1 update, it no longers works in my car. My stereo displays an error message of 'iPod err' when I connect it. I've used this same car stereo and USB cable to connect my iPhone for years without any issues, until the 7.1 update a couple days ago.
Anyone else having this issue? This is real frustrating.

In another thread on this issue, Brendan writes:
Turns out restarting my car and/or rebooting my iphone "fixed" the issue. Apparently this was unrelated to the iOS 7.2 upgrade. Honda + iPhone has been rock solid (even if the Honda Fit UI is terrible), so I'm not sure what to make of this problem. Maybe a glitch? Who knows.
Here is the URL for that thread: https://discussions.apple.com/message/25211736?ac_cid=tw123456#25211736
His suggestion worked for me: turn off your car, completely shut-off your phone and let it sit a few minutes. Then reboot phone and start car and try again.
Good luck!

Very long shutdown time after Yosemite install

After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
Problem description:
very long shutdown time after yosemite install
EtreCheck version: 2.1.8 (121)
Report generated 19 Feb 2015 01:19:39 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,2
    1 2 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 868
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
    AMD Radeon HD 6490M - VRAM: 256 MB
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
Disk Information: ℹ️
    Hitachi HTS545050B9A302 disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    LaCie LaCie Device 500,11 GB
        EFI (disk2s1) <not mounted> : 210 MB
        MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Karabiner.app
    [not loaded]    org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
        /Library/Parallels/Parallels Service.app
    [not loaded]    com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
    [not loaded]    com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
    [not loaded]    com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
    [not loaded]    com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
    [not loaded]    com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.Avid.driver.AvidDX (4.7.1) [Click for support]
    [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
    [not loaded]    com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
    [not loaded]    com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
    [not loaded]    com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
    [loaded]    com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
    [not loaded]    com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
    [not loaded]    com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
    [not loaded]    com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
    [not loaded]    com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
    [not loaded]    com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
    [not loaded]    com.nvidia.CUDA (1.1.0) [Click for support]
    [not loaded]    com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
    [not loaded]    com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
    [loaded]    com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
    [not loaded]    com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
    [not loaded]    com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
    [not loaded]    com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
        /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
Startup Items: ℹ️
    ciscod: Path: /System/Library/StartupItems/ciscod
    CUDA: Path: /System/Library/StartupItems/CUDA
    Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
    DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    PACESupport: Path: /Library/StartupItems/PACESupport
    ProTecVb: Path: /Library/StartupItems/ProTecVb
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [unknown]    c om.apple.coreservices.appleevents.plist [Click for support]
    [unknown]    c om.apple.diskarbitrationd.plist [Click for support]
    [unknown]    c om.apple.mDNSResponder.plist [Click for support]
    [unknown]    co m.apple.securityd.plist [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [loaded]    com.cisco.anyconnect.gui.plist [Click for support]
    [running]    com.epson.epw.agent.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.metakine.handsoff.agent.plist [Click for support]
    [loaded]    com.nvidia.CUDASoftwareUpdate.plist [Click for support]
    [failed]    com.parallels.desktop.launch.plist [Click for support]
    [loaded]    com.parallels.DesktopControlAgent.plist [Click for support]
    [running]    com.parallels.vm.prl_pcproxy.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [failed]    com.autodesk.backburner_manager.plist [Click for support]
    [running]    com.autodesk.backburner_server.plist [Click for support]
    [failed]    com.autodesk.backburner_start.plist [Click for support]
    [running]    com.cisco.anyconnect.vpnagentd.plist [Click for support]
    [running]    com.digidesign.fwfamily.helper.plist [Click for support]
    [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [running]    com.metakine.handsoff.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.parallels.desktop.launchdaemon.plist [Click for support]
    [loaded]    com.rogueamoeba.hermes.plist [Click for support]
    [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    [loaded]    PACESupport.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
User Login Items: ℹ️
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    Picasa: Version: 1.0 - SDK 10.4 [Click for support]
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    CUDA Preferences [Click for support]
    DigidesignMbox2 [Click for support]
    Digidesign Mbox 2 Pro [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    PenTablet [Click for support]
    XDCAM Drive Monitor [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
    Destinations:
        Time Capsule [Local]
        Total size: 799.52 GB
        Total number of backups: 18
        Oldest backup: 2014-11-12 02:44:18 +0000
        Last backup: 2015-02-17 14:14:45 +0000
        Size of backup disk: Too small
            Backup size 799.52 GB < (Disk used 408.02 GB X 3)
Top Processes by CPU: ℹ️
        20%    mds
         5%    WindowServer
         2%    Google Chrome
         1%    launchd
         1%    prl_disp_service
Top Processes by Memory: ℹ️
    515 MB    Final Cut Pro
    378 MB    softwareupdated
    309 MB    Google Chrome
    215 MB    Google Chrome Helper
    206 MB    mds_stores
Virtual Memory Information: ℹ️
    220 MB    Free RAM
    3.56 GB    Active RAM
    3.34 GB    Inactive RAM
    1.45 GB    Wired RAM
    7.56 GB    Page-ins
    4 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 18, 2015, 04:35:18 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
    Feb 18, 2015, 04:29:01 PM    /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
    Feb 18, 2015, 04:11:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
    Feb 18, 2015, 04:04:44 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
    Feb 18, 2015, 01:49:37 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
    Feb 17, 2015, 05:36:32 PM    Self test - passed

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Shut down from safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
Related information....
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

HT1766 all my contacts photos and other data is not seen in my laptop and iphone after i installed itunes in my laptop

all my photos and contacts and other data is missing after i installed itunes in my laptop and conected my iphone and updated and syncranised it

No. If you made your backup to iCloud, iTunes will not restore from an iCloud backup. See:
iOS: Backing Up and Restoring Data to a New Device

Tie Machine no longer backs up after lion install

After Lion install, Time Machine no longer backs up-will start to back up but freezes after a few kb's-spinning clock will spin 24/7 but backup is stalled

See the green box in #D2 in Time Machine - Troubleshooting.

It is taking too long to login after i installed kaspersky

MY macbook air was working fine but after i installed kaspersky internet security and restarted it is it taking too long to login.. What do i do?

Try restarting in Safe Mode: Starting up in Safe Mode
Try disabling your Login Items: If you think you have incompatible login items
Both are temporary measures. Either one may allow you to log in so that you can uninstall Kaspersky. If you are unable to log in write back for additional instructions.
To reboot normally restart your Mac and log in without holding any keys.

Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
What's wrong? Any idea?
Thanks

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

IOS 7.1.2 Bluetooth no longer sees my keyboard - continually keeps searching. Can anyone help?

I Updated my software (iOS 7.1…2) and now the Bluetooth can't find my keyboard. It worked perfectly before I upgraded - any suggestions?

iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
 Cheers, Tom

Can no longer drag and drop into my iPhone after iOS 7.0.3.

I'm not entirely sure what is up with this but it's excruciatingly frustrating.
I updated my iPhone 4S 64GB to iOS 7.0.3 the other day. When I plugged it into my car to play some music I noticed that most of the songs in my playlists showed up as being on the phone but they would be skipped over until the music app came to a song that was purchased in Itunes on the phone.
So, I plugged the phone into my PC thinking that it needed to be synced. I then noticed that all the songs on my phone have dotted grey circles beside them.
I deleted all the music off the phone and attempted to drag and drop files from my library back into the phone. As I already have 'Manage Music' checked, this normally resulted in the songs effortlessly being hurled through cyberspace or via a cord to my iPhone.
Now, however, all my songs that I attempt to place on my phone show up as greyed-out with Mr. Dotted Circle beside them.
What the gee-golly-willikers is this all about?

Have you checked the manually manage music box?

ITunes no longer shows my iPhone after I installed the latest iTunes update.

I agreed to install the latest iTunes update and went through all the steps including rebooting. My phone then asked if I trusted the computer and I clicked "trust". It asked again and I clicked "trust". iTunes never opened automatically and when I opened iTunes, I saw that my iPhone5 was not listed; therefore, I can no longer sync. Then I rebooted my (Windows 7) computer again and experienced the same problems. I moved my phone to a different USB port but experienced the same problems.

I have an AT&T Uverse email account that keeps saying I have an "incorrect user name or password."
Perhapse it's the same issue since the Uverse e-mail is through Yahoo.

Bluetooth car kit connectivity issue after IOS 8.1.2 update

After the IOS 8.1.2 update I cannot connect my IPhone with the Bluetooth car kit (hands free) system of my car.
Before the update connectivity was perfect, after the IOS 8.1.2 update the car kit does not find the IPhone any longer.
To solve this issue I deleted both the car kit and the IPhone from the paired devices list of both (my car and the Iphone) and tried to pair them again - no success. The car kit just does not finds the Iphone any longer.
Please, help!!!

Just to share the way I finally solved the problem - might be helpful to somebody else.
I didn't noticed before that the IOS 8.1.2 update changed automatically the name of my Iphone from the one I've given to it before to just "Phone".
I re-named the Iphone (just gave a new name to it by going to Settings -> General -> About -> Name) and then the car kit managed to find the phone very quickly via Bluetooth.

Windows7 no longer sees iphone as a device

I just installed ios 7.0.6 and I can no longer see the iphone as a device on a windows 7 computer, in order to transfer pictures from the iphone to my computer. I used to be able to see it when opening up my computer and I would also get the autoplay window. Not anymore. Are others having the same issue? Is there another way to offload pics/videos from the iphone to the computer without emailing each one of them?

See this support document. http://support.apple.com/kb/TS1538

TS3694 Error 3194, trying to resore iphone after ios update

After downloading the new ios to my iphone 4g, the apple just keeps slowly flashing on and off. Itried to restore the phone, but it said it could not be resored, error 3194. Can anyone help?

This usually occurs because you previously used an iOS hacking utility such as tinyumbrella.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

How to recover a lost photo library on iPhone after ios 5?

Hi guys,
I know that there has been hundred of questions regarding lost photo's after installing ios 5 but I am struggling to find anything that relates to my situation.
I installed ios 5 onto my iPhone 4 on saturday afternoon, but before I did this I backed it up. Everything seemed to work ok, I backed up to my mac rather than iCloud as I hadnt yet installed Lion.
When I went to use my phone I noticed that everything was still there (apps, contacts, camera roll etc) except for another photo library that was in my photo app (the library was the photo's from my previous iPhone). I cant find these pics anywhere. I have tried using the back up twice but they still arent there!!
does anyone have any idea of where they might be or have they been lost forever?
any help would be greatly appreciated.
many thanks

The photo sync is one way - computer to iphone.
You ould have to e-mail them to yourself. When you sync photos to your iphone the current pics will be deleted.
The iphone is not a storage device, it simply mirrors the selected content of your computer.

Bluetooth no longer sees iPhone after IOS 5 install

Similar Messages

Maybe you are looking for