Bluetooth not working after upgrading to Vista

Hi All,
I called tech support and they pretty much informed me that I'm s.o.l. so I thought I'd turn here.  I'm running a T60 (model 8744).  I was running Win XP and getting blue screened to death.  So I upgraded to Vista Business.  I now have everything re-installed and working...except for Bluetooth.  Lenovo support says there aren't any Vista drivers for Bluetooth on this model.  IS THAT RIGHT?  At this point I'm pretty shocked.  I figured by now they would have completed a Vista driver pack for this laptop considering it's a couple years old now.  Anyone have any suggestions on other drivers that I can use successfully?

It seems that the mouse has still stored the pairing information (normally it should loose it if the battery was removed).
The mouse tries to connect to the last connection, but the other side (PC) has not the information anymore.
Could you try to pair the mouse with any other PC or notebook before you try to pair it with your notebook again ?
Furthermore increase the security for this test by enabling the following option:
Right click Bluetooth system tray icon > Options > Security > Custom Level > Mode: Link level enforced security

Similar Messages

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

  • Bluetooth Not Working after upgrading to Windows 8.1

    My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

    You're very welcome.
    That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
    We tried the W7 drivers, and they didn't work.
    That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
    The Ralink 3.0 version of BT is not supported in W8.
    While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
    Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
    You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp​...

  • Folio 13-2000 Bluetooth not working after upgrade to W8.1

    After upgrading to W8 (and later W8.1 64 bit) I cannot connect to my bluetooth speaker (AllLike brand). The speaker works perfectly from Android buy W8.1 does not find it (just says Searching...).
    I have tried to find a bluetooth driver for Folio 13 and W8.1 but I only find it for Windows 7.
    Please help.

    Please ignore this. It suddenly started to work.

  • Bluetooth not working after upgrading to Windows 10

    My laptop is HP Pavilion g4 and its serial number is [Personal Information Removed]. I recently got the upgrade for Windows 10 and installed it. Everything has been working out perfectly EXCEPT the Bluetooth. When I try to upgrade software in Device Manager, it upgrades from Ralink Bluetooth 4.0 Adapter to Mediatek Bluetooth adapter and after I click "ok", the driver reverts back to Ralink Bluetooth 4.0 Adapter. Also, the Bluetooth option itself is not there in the Devices section of settings and it is missing from the notifications tab as well. Occasionally, some Microsoft Bluetooth LE enumerator shows up with a yellow mark next to it. Kindly help me out with this problem!!! Thanks

     Hi Yoloo, I had the same problem and ti's worked for me... Solution of member CharlieK_EU !! I'm using HP Probook 4440-S, W10 Pro, 64-bits. Version  V8.0.1.341   Description Qualcomm Atheros BlueTooth driver
    File Size 96,85 (MBytes) 2015.04.29  update Download from Global (DLM) Global P2P Qualcomm Atheros Bluetooth Driver Link of discussion Good luck!! 

  • Camera not working after upgrading to vista ultimate

    So I upgraded to vista ultimate and since then the camera hasn't worked. I don't have it turned off, and i went to device setting to see if it was working properly and also tried updating the driver. Everything seems to be in order, the camera just doesn't work. anyone have any ideas?

    is it ultimate 64? if you dl the driver from lenovo's website it probably doesn't support 64bit, i had tons of trouble with my camera before too but eventually it kinda fixed itself. I think the device just wasn't being recognized by windows and the driver never completed installation but after a few reboots it gave me a notification saying that it was indeed finished installing and since then it worked great.

  • Bluetooth not working after upgrading to Maverick

    Hello All!
    I upgraded my Mac Pro system (NOTE: This is NOT the Mac Pro "Book" laptop, this is the Mac Pro tower system.) to Mavericks yesterday and now my iPhone (Verizon 4 model) won't connect via Bluetooth. It asks me for the pairing code number, which I enter in and then it shows for a split second as being connected, but then goes back to being disconnected. Then it will give me errors as.... it can not connect because Network connection is not available. Or device can not be found. Even though it shows my iPhone in the Bluetooth devices preference window on my Mac Pro and also my  Mac Pro system on my iPhone Bluetooth settings device window.
    Anyone have any answers? Other than this is another Verizon scheme to block their iPhone users into paying another surgcharge or fee to now be able to connect via Bluetooth?
    Thank you!
    Kevin

    You're very welcome.
    That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
    We tried the W7 drivers, and they didn't work.
    That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
    The Ralink 3.0 version of BT is not supported in W8.
    While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
    Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
    You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp​...

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Bluetooth handset not working after upgrading to 2.2.1

    I failed to get my bluetooth headset working after upgrading to 2.2.1. I have tried 4 different headsets (with different brands and models)and even bought a new one (Plantronic 640MP) and no luck also. I have also tried to hard reset and restore in iTunes but no success.
    I can successfully paired my headset with iphone 3G but no sound transmitted over. I have been using my headset flawlessly before the firmware upgrade.
    Any ideas? Thanks in advance.

    Hello.
    I´m new to iPhone and this forum
    I am having the same problem with my iPhone but I don´t know if it´s related with 2.2.1. firmware since that came on the iphone right away when I bought it.
    I can connect to handfree set and pair up fine, but no sound what so ever is passed to or from the handsfree set. The handsfree set works fine with other phones.
    I tryed restore but it didn´t help.
    I restored the iphone with itunes, the function "If you are experiencing problems ...." hit the button "Restore" e.g.:
    http://www.tzywen.com/photos/iphone/itunes_restore.png
    After that it told me to "set up my iphone" and I chose "restore from the backup of" e.g.:
    http://www.mattcutts.com/images/restore-iphone.png
    The links are not from my procedure, just something I found on the internet to describe what went on
    Did anyone find a solution for this problem?
    How often do Apple make new firmware upgrades? (hoping that will help)
    Regards Martin

  • Internal speakers not working after upgrading to Maverics

    internal speakers not working after upgrading to Maverics

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Reinstall OS X after backing up all data.
    14. Make a "Genius" appointment at an Apple Store.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

Maybe you are looking for