Bluetooth Not Working after upgrading to Windows 8.1

My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

You're very welcome.
That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
We tried the W7 drivers, and they didn't work.
That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
The Ralink 3.0 version of BT is not supported in W8.
While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp​...

Similar Messages

  • Bluetooth not working after upgrading to Windows 10

    My laptop is HP Pavilion g4 and its serial number is [Personal Information Removed]. I recently got the upgrade for Windows 10 and installed it. Everything has been working out perfectly EXCEPT the Bluetooth. When I try to upgrade software in Device Manager, it upgrades from Ralink Bluetooth 4.0 Adapter to Mediatek Bluetooth adapter and after I click "ok", the driver reverts back to Ralink Bluetooth 4.0 Adapter. Also, the Bluetooth option itself is not there in the Devices section of settings and it is missing from the notifications tab as well. Occasionally, some Microsoft Bluetooth LE enumerator shows up with a yellow mark next to it. Kindly help me out with this problem!!! Thanks

     Hi Yoloo, I had the same problem and ti's worked for me... Solution of member CharlieK_EU !! I'm using HP Probook 4440-S, W10 Pro, 64-bits. Version  V8.0.1.341   Description Qualcomm Atheros BlueTooth driver
    File Size 96,85 (MBytes) 2015.04.29  update Download from Global (DLM) Global P2P Qualcomm Atheros Bluetooth Driver Link of discussion Good luck!! 

  • Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

    My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
    Help please

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Ethernet LAN not working after upgrading to windows 8.1

    After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

    You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

  • Dolby Home Theater v4 not working after upgrading to Windows 10

    Hi there, I just upgraded to Wndows 10 Home from Windows 8.1; everything went smoothly except for the fact that Dolby Home Theater v4 does not work. I had to reinstall it using the .msi file found in the Realtek Audi folders. I chose v4 over any of the other versions because I like how I can tune the equalizer to my liking and different uses. Anyways, the regular audio works and Dolby is turned on but there is no activity appearing on the equalizer and my music does not change once adjusted. Had this problem when doing an optional audio driver update in the past when I was running 8.1. I do not have the option to rollback the driver after upgrading to Windows 10. Does anyone have a solution to this issue or know what the correct Realtek driver is to make Dolby work? This is one of my favorite features of my laptop and I really want it up and running again! Thank you in advance! JakeStiebs My unit: Lenovo Ideapad Z580 running Windows 10 Home with Realtek Audio Driver 6.0.1.7535

    one more thing. I was not able to download cleanup tool/online scanner too. but may be it has something to do with my internet bandwidth. and other strange thing i observed is that before restart i was not even able to turn off all security features. but after restart that problem seems to be corrected.

  • 2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

    Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment.  In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

  • ThinkPad X240 WWAN not working after upgrade to Windows 10

    Hi, My 3G Card stoped working after upgrade to Win 10.I tried latest drivers from Lenovo but with no success. When I open Device Manager the Card is shown as properly installed but the driver manifactire is Microsfoft not Lenovo/Ericsson When I try to reinstall the driver the installation package poppup a message 'No action was taken as a system reboot is required'On the network connections the Mobile Netork is disabled:after trobleshooting on the connection I recieved and error: witch code 36. Is there a solution available ? regards,stuckoff

    Which Operator and Country SIM card you are using ?Error Code 36 is regular deactivation. Do a Windows update , Restart then Shut Down System and start ( TYhis Power cycles the Device ) .  From your Screenshot it Looks like  the Cellular Data is not ON and Microsoft cellular service is in some mismatched state after upgrade.After restart press like in below screenshot  order 1 --> it turns cellular  on or off, 2---> It will take you to settings page 3--> Connect from here. Dont ask why Microsoft made connecting to WWAN device so complex    

  • Games not working after upgrading to windows 10

    My Laptop configuration is 8GB Ram,Intel i7 processor and 4GB Nvidia Graphics which is more than enough for running games like Batman Arkham, Portal, Skyrim etc. These games used to worked smoothly when I had windows 8.1, but after upgrading to windows 10 these games are not working/working very slowly. What to do?

    one more thing. I was not able to download cleanup tool/online scanner too. but may be it has something to do with my internet bandwidth. and other strange thing i observed is that before restart i was not even able to turn off all security features. but after restart that problem seems to be corrected.

  • My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

    I just upgraded to Windows 10, and now the scanner will not work, although I can still print.  I downloaded the latest driver, but this does not seem to help.  The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

    Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
    I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8 
    (It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
    And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

  • Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

    After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
    I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

    I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

  • HP Pavilion 11 x360 - touch screen not working after upgrading to Windows 8.1 Pro

    I installed windows 8.1 pro and now my touch screen isnt working. i checked system screen and it says NO PEN OR TOUCH INPUT AVAILABLE  
    and i have 2 keys swoped on my keyboard. The @ and " i

    Hello theow,
    Welcome to the HP Forums!
    I understand the touch screen on your notebook is not detected after updating to Windows 8.1. 
    This would be the best place to start: Troubleshooting Touch Screen Issues in Windows 8. This is a great document that covers touchscreen issues from start to finish. Do not be alarmed that it states the document pertains to TouchSmart PC's, as the steps are the same.
    It would also help to know which product you are using so I can give you more detailed information, such as driver downloads.
    For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
    Hopefully this gets you going!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Folio 13-2000 Bluetooth not working after upgrade to W8.1

    After upgrading to W8 (and later W8.1 64 bit) I cannot connect to my bluetooth speaker (AllLike brand). The speaker works perfectly from Android buy W8.1 does not find it (just says Searching...).
    I have tried to find a bluetooth driver for Folio 13 and W8.1 but I only find it for Windows 7.
    Please help.

    Please ignore this. It suddenly started to work.

  • AMD redeon HD 7400 graphic not working after upgrading from windows 7 to windows 8 Pro

    Hello,
    I have hp Pavilion G6 1117tx model. i have upgrade from windows 7 to windows 8 Pro. after upgrading i have observed that on righ click option i have not fine CCC and Configure switachable graphic option is missing. so please help me how i can solve proble relationg to AMD redeon hd 7400 grphic card and intel hd 3000 series grphic switchable option.
    Please help........
    Mounal Patel
    This question was solved.
    View Solution.

    Hi,
    Download and install the switchable graphics driver on the following link.
    http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
    When the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

Maybe you are looking for