Bluetooth not working, drivers not helping or saying not device found. Pavillion P7-1254
i have been looking everywhere, and tried almost every driver solution i could find but i still cannot find a driver for windows 7 that will allow me to use my bluetooth. i have used it recently but i had to reinstall the OS now the driver on the HP website does not work my wifi works fine though . when i connect to my bluetooth speakers it trys to connect and does it, somewhat sucsessfully. i hear my device beep saying connected, then beep again meaning disconnected and then windows says bluetooth peripheral device driver not found. attempted this with a sony xperia L phone as well and nothing, samsung galaxy S5 nothing. device manager lists bluetooth as "generic bluetooth adapter" as well.... is there any way i could recive some help on this? im tottally in the dark here... i have literraly spent 2 days trying to get this to work... please help!!!! or atleast tell me hes dead jim ! lmao
Pavillion P7-1254 QW699AA#ABA
OS: Windows 7 Home Premium
devices tried to conect : Xperia L, Samsung Galaxy S5, HMDX Bluetooth Speakers, Twist by i sound speakers, Acer 2 - in 1 windows 8 tablet ...(which actually i was able to suscessfully send files to this morning)..hmm
i am pretty sure this is a driver issue... but HP site not working and broadcomm tells me contact manufacturer when i tried installing the driver.........pleeease help ... i have cookies? hah....
OH! and i noticed HID says USB\VID_0A5C&PID_217D&REV_0608 when they used to say PCI\blahblahblah....
Hi,
Windows 7 should find this out for you. Please try from HP:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=pv-77955-1
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
The scanner in my MX432 is not working...it always say not connected to PC...
The scanner does not work!...I was able to use it only once when I bought it...now I want to scan some photos but it kept saying not connected to PC...what should I do??
Hi smrdhdmom,
To resolve this, please follow these steps:
1. Click on the Canon IJ Network Scan icon in the upper right hand corner.
2. Click on Open Settings.
3. Click Register Scanner.
4. The Twain Data Source Name should read Canon MX432 Series Network. Click on the MAC address and then click Apply.
5. Make sure that the PIXMA MX432 has a checkmark next to it in this list.
6. Click OK. Once the MX432 is selected, please make sure that the MX432 is selected in MP Navigator as well.
To do this, please follow these steps:
1. Open your Applications folder, click on the Canon Utilities folder and then open the MP Navigator.
2. Click on the Preferences button.
3. The PIXMA MX432 that should be selected is the network attached, not the USB attached. The network PIXMA MX432 will be named PIXMA MX432 (xxx) with the mac address of the unit in parenthesis, just as it appeared in the Canon IJ Network Scan Utility.
4. Click OK. Scanning should now be possible over your network. -
Query is not working cant see result always saying no item found
hi i have created this query to see all systems who have ms word installed on them but its always showing no result other builtin queries working fine but when i create new query its show nothing just no item found i would love if some one help me in this
matter thanks
select SMS_R_System.Name, SMS_R_System.LastLogonUserName, SMS_G_System_SoftwareFile.FileVersion from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID = SMS_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName
= "winword.exe" order by SMS_R_System.NameHow have you configured your Client Settings in the Administration node? The setting called 'Software Inventory' needs to be enabled. If you've just recently enabled it with the default settings, make sure that the client is sending in the data at a schedule
other than 7 days, unless you want to keep it at the default.
Also, you'd need to specify which file types that should be inventoried. If I'm not mistaken, by default there's no file types specified.
Enable this feature with caution, as it could if configured in a bad manner, end up sending a lot of data over the network.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja -
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple. -
my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help
I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck
-
I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me
What are you trying to connect the iPhone to and what is happening when you try?
-
i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
Could use help me because it is say it does not work? plz help me.
help me because it is say it does not work? plz help me.
http://forums.adobe.com/thread/1195540
-
HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes
please help my ipad min is not working on the scren it says iPad disabled connect to itunes
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I go to settings and switch "Automatic time" off and then back on. It works for a while, but then just goes back to being off. I've tried manually setting the time, but it just goes back to what it was before. If I send a text, it sends and then disapears. I can't see what I wrote! I went in to Apple to try and get it fixed, but they just restored my phone. It's still not working. Please help!
It's not hacker or a virus. You are experiencing what a number of users of iOS 5 are experiencing now - sluggish or less than perfect iPad performance. It seems that for some of us - memory management has gotten a little out of whack with this most recent update. Some of the basic troubleshooting steps that you can try are ....
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Close apps in the recents tray. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you have Safari crashing issues - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
None of these steps should be necessary as part of your daily routine - the iOS is supposed to handle all of this without any user input. Once again - for some of us - the iOS is letting us down.
Until Apple releases another update that resolves this issue for the "few" that suffer, keep these steps in mind and use them as needed. -
My phone was working fine this am then I go to use it and there is a searching word in the left corner and I can not send a text or a call, i read what the online said to do and it did not work! Please help!
The searching is searching for your cell phone providor... without that being connect you will not be able to use your phone or text messages... try turning on Airplane mode for 30 seconds and turning it back off to see if it reboots the providor search.
-
Hi, i just realize my disk player is not working, can anyone help
Hi, i just realize my disk player is not working at all, i have never use it to watch cd or dvd, now i am trying to install a norton internet security 2012, after i put in the cd, there is no respond, can someone help, please
This question was solved.
View Solution.Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If the drive still doesn't work, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Touchscreen not working: error message code 45, says "device is not connected to the computer"
My subject message basically says it all. My touchschreen is not working at all. I went into device manager and found error message code 45, which states that the "device is not connected to the computer."
I have tried updating drivers, uninstalling and reinstalling the device, and other things, but nothing working.
All advice appreciated.Hi @Jim9 ,
Welcome to the HP Forums!
I saw your post regarding the error code 45. From what you have described this sounds like it is a hardware issue. The only real troubleshooting I can recommend (that you haven't already done), is going a full System Recovery to restore it back to factory defaults. If the issue still occurs then we know it is a hardware problem.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sailHello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.
It would be helpful to know what version of Acrobat, WORD, and operating system.
Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.
Maybe you are looking for
-
Unable to Start Report Builder
Hi, I am new to report server. After installing it I am able to start Report Manager, however when I click on Report Builder button in Report manager, I get the following dialog: Cannot download the aplication. The application is missing required fil
-
HP5510 All-In-One won't scan entire page image
Is there a setting or something that I'm missing when it comes to scanning with my 5510 All-In-One? I'm scanning to my MacBook using OS X. And yes, I'm placing my document in the appropriate corner, but I'm only getting a small portion of the 8 1/2
-
I can't open safari. It always close automatically
I didn't bring apple disc with me. Is there any way to repair this without apple disc?
-
Please can anyone help...I recently acquired Photoshop CS3 and last night downloaded from Adobe the Camera RAW file, I followed the detailed instructions carefully, so thought all was well...but when I went to open a file I had an error message sayin
-
What is BIG, what is F A S T ?
Aperture is a rather complex application and image files are getting larger. All of this can lead to slow downs and other problems. And this, in turn can lead to a bit of thrashing by folks who don't fully understand how Aperture (and Lightroom) work