Bluetooth not working for Lenovo G560 for windows XP and WINDOWS 7

When i installed Bluetooth software in my lenevo G560 for XP and Windows 7... it was installed successfully and after restart.. i can see an icon "My Bluetooth Places" . and when i clicked on that.. iam getting error message "NO LOCAL BLUETOOTH DEVICE WAS DETECTED" plzz solve me with this...

Hello mate,
Press Fn+F5 to activate bluetooth.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

Bluetooth not working in lenovo g580 windows 8 pc

I have a problem with my bluetooth in lenovo g580,windows 8.
It wasn't working properly,so I tried to update the drivers....now bluetooth is not working at all...
I can see the bluetooth icon and it is turned on,but I am not able to use bluetooth.The share with bluetooth option does not appear.
Whenever i try to install a driver,it says the admin has set policies to prevent this.
I downloaded the drivers from lenovo again and tried to install them,but they didn't get installed.
Somebody please help me.

me two same problem please we want answer

Microphone not working anymore - Lenovo G560

Hi, few months ago I installed arch, and internal mic worked. When I add "options snd-hda-intel model=ideapad", internal speakers also mute after plug-in headphones. I didn't use mic since now, and now, when I need it, it doesn't work. I'm using stock kernel, so the problem happend probably after upgrade form 2.6.34 to 35, but I'm not sure. I tried recompile alsa drivers, latest alsa-driver snapshot.
Codec - Conexant CX20585
output from lspci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)

I have the same issue. Me and my friend both have the same laptop and arch linux on them. He just haven't upgraded at least 3 months from now, while I have up-to-date system with testing repository. His sound works flawlessly, while I can't get microphone to work. You probably just need to downgrade kernel. I will tell you which version of kernel and alsa-driver he's having when I found out.

Bluetooth not working in windows 7 however it is working in window XP - Lenovo R61

I have two operating system installed in my lenovo R61 laptop window xp and window 7 in different drives. Bluetooth driver is working fine on pressing Fn+F5 key in windows xp but in window7 bluetooth is not working and on pressing Fn+F5 key, nothing happens. I have also tried to install ''Bluetooth with Enhanced Data Rate Software II'' driver with ''README for Bluetooth with Enhanced Data Rate Software II'' txt file but it doesn't let me install and give me this message:
No Bluetooh device was detected. Please make sure that your Bluetooth device is plugged in properly in order to continue installation.
So, Please suggest me any solution if anybody have.

Hi Vipin,
Welcome to Lenovo Community Forums!
I’m sorry to hear that Bluetooth device is not working on ThinkPad R61.
To resolve the issue please right click on computer and go to manage, in device manger check if there is any yellow mark in any of the adapter in it.
If it is showing any yellow mark then not all the drivers are installed in your system.
If there is no yellow mark, then you can check with installing Lenovo power manager application and restart the system.
After restarting the system press Fn+F5 to enable the Bluetooth device.
Below is the link to enter the downloads page and download updates accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My G580 i5 Laptop Bluetooth Not Working Please Help me. Operating system - Window 7

Hi
My lapotp Bluetooth not working after update Lenovo readyCommn 5
Please help me and shotout my Problem
Laptop Detail
Ram -4 GB
Processor - i5
Operating System - Window 7 64 Bit
Wireless working fine only bluetooth problem
Please reslove my issue

I would suggest reinstalling the Bluetooth drivers for your G580
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

WINDOWS 8.1 BLUETOOTH NOT WORKING AFTER UPDATE ON ACER V3-571......Solved!!!!!!

Hello everyone, if anyone has had the horrible task of trying to get his or her bluetooth working after upgrading to windows 8.1, then look no further. It took me hours and hours of faffing and fist raging, but in the end, there can be only one. Anyway...Here is your solution.....Ps! I already upgraded to Windows 10, but went back to 8.1 as it trashed my PC and cost me 3.5 half days of painstaking re-install to get my laptop to work again. (WINDOWS 10...DONT BOTHER IN MY OPINION) I have : ACER V3-571 64 BIT WIN 8.1 AGAIN. . IF YOU UPGRADE THIS LAPTOP TO WINDOWS 10...YOUR DOLBY V4 WILL STOP WORKING...was the start of a new nightmare for me. MICROSOFT UPGRADE YOUR ACER WITH THEIR OWN DRIVERS WHEN YOU UPGRADE TO A NEW OPERATING SYSTEM, OFTEN THIS LEADS TO STUPID FIDDLY THINGS LIKE APPS AND APPLICATIONS NO LONGER WORKING.... SO here we go!!! SOLUTION TO BLUETOOTH NOT WORKING V3-571 ACER WIN 8.1 64-----------------------------------------------------------------------------------1) Switch off your bluetooth .........search top right screen > Settings > Bluetooth > Toggle off!2) Right Click your windows logo on the left hand side of your screen > device manager > Bluetooth >Uninstall totally the bluetooth driver and or delete.3) Exit device manager.4) www.google. > find acer drivers > acer website. On website to find drivers, use auto detect serial number > go to your downloads folder >open downloaded auto detector > copy serial number> back to asking box for your serial number >right click > Paste serial number.5)Select operating system from drop down menu (typically windows 8.1)6Drivers > Select Bluetooth Qualcom Atheros Driver 647) Go to downloads on your pc8) Right click the downloaded bluethooth qualcom atheros zip folder > > extract here9) Go into unzipped bluetooth folder > Double Click the installer Icon > Run installer10) Restart PC11) Boom!!! Happy Days.....Nightmare over. YOUR BLUETOOTH WILL NOW CRUISE Hope this will help other people, I had a nightmare for a good few hours trying to get my bluetooth to work again after upgrading to Win 8.1 FROM Win 8.

I am not bothering with windows 10 my friend, it is too much of an newbe baby at the moment and there are just too many bug fixes need doing in my opinion. I did manage to get my dolby home theatre to work again in windows 10, but it was an awful dulled down version with only half the features of the original that came with the version that was on my pc. My plan is to stick to windows 8.1 until it's death. When they withdrawl all the security patches for windows 8.1 and it becomes obsolete, then I will be forced to trash my pc again and go to windows 10, was not much fun mind spending 3.5 days putting everything back to its former state. Hope they do make windows 10 more stable and fix a lot of the bugs. I tried opening videos and pictures in windows 10.... result = missing element errors.... and error, error, error,,, So I think I will wait until 28 July 16 to when the last day of my free upgrade and reservation to windows 10 becomes mandatory. (This is I day before my year to upgrade expires). Thanks for your post. Will

F14 not working as PRINT SCREEN for XP with apple numeric keypad

i posted this elsewhere but i am basically desperate to get a couple things finalized over here so apologies if no one knows how to solve this one. just sort of hoping to get some things out of my hair once and for all...
i have an apple keyboard with numeric keypad on my mac pro running windows xp and windows 7 in addition to Lion.
for some reason the F14 key is not getting me a print screen despite spending a /lot/ of time trying to get this working.
can anyone help me get this figure out finally? there is a lot of info on the net about this but now much help.
mac tech articles seem pretty sure that F14 should be working.http://support.apple.com/kb/HT5636
what am i missing?

hi mooblie.
a huge (HUGE!) thanks here for the help. i have been googling this off and on for about a year believe it or not.
anyway, the lowdown appears to be Snip tool in win 7 as you indicate (right click i think it was to a save on taskbar once it was opened) and then i used Applekeys2 which i downloaded while in windows xp.
two notes for those that come after. 1. i did download keyboard layout creator which is a windows tool but it seemed much more powerful (and complicated) than i needed at least for this initial issue to get me going finally.
2. i can't remember if snip tool will drop an image file in a folder or on the desktop but i did FINALLY REALIZE that part of my problem here with windows XP was that you HAVE TO PASTE the captured image into a windows image program (i am using "Paint" i think which i also pin to the taskbar). this was a major pain because having gotten used to the mac screenshot i was totally clueless that it did not function so seamlessly in windows!!
anyway, in short the Mac screencapture could be considered a "screencapture and save to file" and the windows (XP at least) could be called a "screencapture to windows whatever memory and then DON'T FORGET you will have to paste it somewhere..."
this requires a /lot/ of clickthroughs so i am still looking for:
A. one shot screencapture to file on desktop funtion in the windows OS's
B. screencapture /selected/ area instead of whole screen since this also requires post editing that i would like to avoid.
anyway - BIG THANKS.

I have created an apple id but it will not work on my pc for icloud.How do I sign into icloud?

I have an apple id but that id will not work on my pc for icloud..How do I get an icloud id?

To enable iCloud on your Windows PC,
first set up iCloud on your other (Apple) devices,
then install the iCloud Control Panel for Windows...
From Here > http://www.apple.com/icloud/setup/pc.html

I am using iphone 4s and just updated ios6 but my apple map is not working please help me for the same

Dear all,
as i am using i phone 4s in INDIA, today itself i updated my phone to operating system ios6, but my map of phone is not working , so please help for same.Its says "direction could not be found ", when i select the starting point and end point, go to start.
With Regards
Anurag

Friend,
refer to following discussion on the same
Apple maps very disappointing

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
so it is completely unresponsive.
I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
I've found that Mac just doesn't play nice with some programs at all.
And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
Please advise if you found a resolution and what it was.
Thanks

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

Battery does not appear to charge
Important: iPod touch cannot be charged with a FireWire-based power source.
Verify that the power source being used is working properly.
If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
Try another USB port.
Try charging from a USB charger if available.
If that does not help, try another USB cable if available.
Learn more about charging the battery.
The Home button isn't working
Put the iPod Touch to sleep.
Wait a couple of seconds.
Press the Home button.
iPod Touch should wake up.
If iPod Touch does not wake up, then iPod Touch should be serviced.
Resources for Service
http://support.apple.com/kb/he57
https://selfsolve.apple.com

Bluetooth not working for Lenovo G560 for windows XP and WINDOWS 7

Similar Messages

Maybe you are looking for