Bluetooth not working properly after 10.6.3 upgrade

I am having trouble with the magic mouse after the 10.6.3 upgrade.
The mouse works normally when working on the computer but if I kick off a file
transfer (file copy) to my NAS over wifi the mouse becomes unusable.
The heavy wifi traffic seems to bog down the bluetooth transmitter for some reason.
The system works normally with a wired mouse during the transfer but bluetooth devices such
as the magic mouse, pda link and sound just die during a wifi file transfer.
I reloaded the magic mouse driver but it did not help.
Under 10.6.2 this worked perfectly. The other problem is that the awake on bluetooth is also
not working since the 10.6.3 upgrade.

Hello Roy:
You might try trashing a preference file (com.apple.bluetooth.plist) and restarting. I do not use WiFi, so I do not have a parallel system to examine.
Barry

Similar Messages

  • Bluetooth not working properly after upgrade to iOS4

    I upgraded my iPhone 3g to iOS4 the other day. Apart from running stupid slow now, and even though i've done numerous hard resets, the bluetooth doesn't work properly anymore.
    If I switch off bluetooth, then switch it on, it connects fine. Once I disconnect though, that's it. I have to restart it again.
    Looks like all those complaints about iphone 4 are actually and iOS4 BUG.
    I wish I'd never upgraded now. Actually, that's not true. I wish Apple would help me DOWNGRADE my iphone 3g so i can use it again. I will not go and buy and iphone 4 just cos of this. If anything I'll switch to Android just because a) i'm not a fanboy and b) consumers should not be treated in such a belligerent manner.
    So, anyone know how to resolve this bluetooth issue? It's got to the point where it's dangerous in the car because my phone rings and I have to recycle the bluetooth to connect it.
    Message was edited by: anthonybrooker

    The problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
    To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
    Ernie

  • Aluminum Wireless Keyboard not working properly after Firmware update 1.1

    Hi,
    Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
    I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
    Thanks in advance.
    Franco.

    I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
    Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
    Steve

  • ITunes / iPhone not working properly after newest update...

    iTunes is not working properly after the newest update...  It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store.  Anyone have a solution or an explanation?  I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works.  Everything was working fine until iTunes and the new ios were installed.  After that it all went to crap.  Thanks, Randy...

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Asha 501 : Whatsapp not working properly after 14....

    Hi,
    whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
    Looks like memory problem after the new  updates or anything else?

    Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
    Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

  • Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

    I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
    Related information....
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
    What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
    When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
    Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

    Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly.  I purchased a Jawbone MiniJambox to use as a speaker phone in my office.  Everyone in our company thinks they are the best.  However, it is experiencing the same issues as with all my other Bluetooth headsets.  Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices.  The Bluetooth patio speakers in our courtyard also have the same issue.  However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues.  Apple says it is a problem with my Bluetooth device.  Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers.  You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
    On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB.  The vehicle entertainment center had complete control of my iPhone and iTunes.  However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center.  Again when I called Apple, they said my vehicle entertainment center needed a firmware update.  Are you kidding me...  That is a bunch of BS...!!!

  • Smart Actions not working properly after software update

    My Razr updated 2 days ago and since then my Smart Actions are not working properly. 
    I have my Work action set to turn the volume down when I'm at a certain GPS.  It shows that "Work" is active, but doesn't turn the volume down.
    Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone.  I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again. 
    Any help appreciated.

        Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again?  Are your other GPS services working as normal?  After the hard reset performed in the store did you install all of the same application that you had before?
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Ipad2, safari does not work properly after ios6 update. How do I fix it?

    I need help in fixing safari problems after ios6

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

  • Touchpad not working properly after changing LCD and invertor

    Product - HP Pavilion DV4 1318TU
    I was having display problems, went through repairer. He changed the LCD, invertor and fixed some issues of motherboard(related display output). After fixing these issues i am facing touchpad issues. Touch is not working properly, and when I use USB mouse its working but after 1-2hr mouse is also not working properly. I connected to external monitor then touchpad is working fine without any issues. Kindly help me and tell me the root cause.
    Thanks

    Hey @ashfaque91 ,
    Welcome to the HP Forums!
    I understand the touchpad and mouse are not working on your notebook after having your display serviced.
    It seems quite odd that they would work fine on an external monitor, and to be totally blunt this is something I cant even attempt to explain. 
    Was this service provided by an HP service provider or was it done by an independent provider? 
    Try using the notebook in safe mode to see if there is an issue with the display driver causing some kind of wonky issue. Without knowing which version of Windows you are running I cannot tell you exactly how to boot safe mode on your notebook, but you can find this information easily by searching "Safe Mode Windows #" in Google.
    Other than this I would suggest getting back in touch with the service provider if the issue started immediately after they provided service to the notebook.
    Alternately, you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Applications not working properly after updating t...

    After eventually updating to symbian Anna, I've noticed that some applications are not working properly, notably AccuWeather and Facebook. Uninstalled AccuWeather and re-installed it but still didn't work . Seems pointless releasing a software update and then to discover that applications from Ovi store won't work on your device! With Facebook I can only login in to my account but when I go to view a friend etc, it shuts down. 
    Has anyone any suggestions or solutions to the problem?
    Thanks

    i updated to the latest version 025.007 on my E7 too and a lot of the apps on the store dont work. Just blank screens.
    Somebody do something!!
    I use other devices, and havent faced this problem with any of them after an upgrade!

  • Camera led is not working properly after update

    After updating to IOS 6.0.1 led is not working properly.
    When filming , the led is burning very weak, and when lightsetting is turned to
    automatic not at all.

    Reset your phone first, hold the home and off button down until the apple symbol comes up. If that doesnt do it, then do a restore from your backup in itunes.

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

Maybe you are looking for