Bluetooth not working properly in nokia xl

I am not able to receive files from Bluetooth from any other devices.but the phone is sending all files from Bluetooth to any device.please help.

Hello, abhishekupp.
Nice to see you posting here our Community forum.
Did something happen prior to the issue? Any error message that you receive? BTW, does it happen to all the types of files they are trying to send on your phone via Bluetooth?
Keep us posted.

Similar Messages

Wifi and Bluetooth not working properly on my iphone

MMy iphone are not working properly it's is not in warranty but they have many of problem in my iphone so please gave me solution of problems otherwise i break my iphone if want that

Use the search function at the to right of the forum, look for the thread with the green checkmark.

Bluetooth not working properly after upgrade to iOS4

I upgraded my iPhone 3g to iOS4 the other day. Apart from running stupid slow now, and even though i've done numerous hard resets, the bluetooth doesn't work properly anymore.
If I switch off bluetooth, then switch it on, it connects fine. Once I disconnect though, that's it. I have to restart it again.
Looks like all those complaints about iphone 4 are actually and iOS4 BUG.
I wish I'd never upgraded now. Actually, that's not true. I wish Apple would help me DOWNGRADE my iphone 3g so i can use it again. I will not go and buy and iphone 4 just cos of this. If anything I'll switch to Android just because a) i'm not a fanboy and b) consumers should not be treated in such a belligerent manner.
So, anyone know how to resolve this bluetooth issue? It's got to the point where it's dangerous in the car because my phone rings and I have to recycle the bluetooth to connect it.
Message was edited by: anthonybrooker

The problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
http://support.apple.com/kb/TS2537
Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
Ernie

-wap-input-format not working properly in Nokia 58...

I didn't know where to report this bug, so I'll try here.
When you create web pages for mobile use you can set various input formats in form elements.
This helps the user by setting up and validating input even before it reaches the server.
One of these is the "-wap-input-format".
I recently ran into a problem with at page that I couln't access from my Nokia 5800 and I decided to figure out why.
The page has an input field like this:
<input name="somenumber" type="text" style='-wap-input-format: "10N"' />
(Which basically tells the phone that in this field you can only enter 10 digits.)
However, even when I enter exactly 10 digits, the field turns red, and the phone refuses to continue until I "correct my error". The only input that the phone will allow is an empty field.
However... if the field is made like this:
<input name="somenumber" type="text" style='-wap-input-format: "NNNNNNNNNN"'/>
everything works just as it should.
But... the first type is also correct according to standards and should work too.
My phone has the V21.0.025 firmware. (and no new updates available yet for this product code.)
Does anyone know where this bug can be reported, or if its fixed in newer firmware?

The solution is NOT changing the webpage. The page already follows the correct standard!
It its the browser in the XM5800 that has a problem. My example clearly shows this. The phone acts inconsistent depending on the syntax in the wap inputfield. Both of the above syntaxes are supposed to give the same result. But one works, and the other, which is probably the one most often used, does not work at all.
Right now I use the Opera browser instead to access that page.(Because Opera does not have this bug.)
My post was simply an attempt to notify Nokia of this problem... Because I can't find any place to report bugs.
And at the same time ask users who have the newer version of the firmware, if they know if this problem still exists.
Message Edited by Timod on 08-Nov-2009 09:04 PM

Bluetooth not working properly after 10.6.3 upgrade

I am having trouble with the magic mouse after the 10.6.3 upgrade.
The mouse works normally when working on the computer but if I kick off a file
transfer (file copy) to my NAS over wifi the mouse becomes unusable.
The heavy wifi traffic seems to bog down the bluetooth transmitter for some reason.
The system works normally with a wired mouse during the transfer but bluetooth devices such
as the magic mouse, pda link and sound just die during a wifi file transfer.
I reloaded the magic mouse driver but it did not help.
Under 10.6.2 this worked perfectly. The other problem is that the awake on bluetooth is also
not working since the 10.6.3 upgrade.

Hello Roy:
You might try trashing a preference file (com.apple.bluetooth.plist) and restarting. I do not use WiFi, so I do not have a parallel system to examine.
Barry

IOS 7 bluetooth not working properly ipad and iPhone

Since upgrading to iOS 7 Bluetooth is not working fully on either ipad or iphone.
What will work ....
BT turns on and off OK
Personal hotspot will work ok and when in use the two devices show each other as connected via BT
Apple keyboard is recognised and connects oK
What does not work,...
If BT is turned on the devices will not find one another, even though they are both showing they are discoverable. They spend for ever trying to discover ANY device and find nothing.
Tried with a device on iOS 6xx and still no discovery
Tried with the Phototransfer app that has always worked fine via BT - it will no longer connect over BT.

no issues with my iphone4 16GB 1.5GB free
try restart and or closing the apps you don't need
http://www.apple.com/support/iphone/assistant/phone/#section_1

Mouse/Bluetooth not working properly

I've recently started to have problems with my mouse, which is a wireless bluetooth. I switched to a new bluetooth mouse and still had the same problems. Unfortunately, I don't have a wired mouse on hand. Occasionally, the mouse will not double click or allow me to pull down a menu or select text. There are numerous other problems, like text typed in the Safari search bar will disappear as I type and every few minutes the computer starts firing off the alert sound in rapid succession until I hit a key on my keyboard. Also -- coincidentally or not -- I am not able to zap my PRAM. Keyboard shortcuts all seem to work, though. I have Time Machine and was considering a system restore, but thought I'd try this first.
Any help would be greatly appreciated!

If your bluetooth is out of whack, the PRAM reset via a bluetooth keyboard isn't likely to work. Try it with a USB keyboard, if you aren't using one already (preferably Apple brand, and preferably plugged directly into the Mac.)
A G4 is a pretty old model, so anothe possibility is that the onboard PRAM battery is dead or dying. You could try replacing it.
Finally, I had a glitchy wireless mouse, and tracked the problem to a flaky Bluetooth circuit or board in my Mini. The solution for me was a Bluetooth USB dongle.

Bluetooth not working properly Z10 with Subaru 2010 and 2012

From the start approx 6 weeks ago, Z10 would not automatically pair (discover) had to manually connected everytime. Sometimes had to turn Bluetooth off and on several times to connect. Once connected Music and phone worked fine thru car speakers.
Every Blackberry I had in the past worked perfectly.
Now in the last week it shows on the screen in the Subaru that it is paired/connected.
Phone rings through car speakers, but goes to the phone speaker when answered. Also music plays thru the phone speakers!!
Any ideas?

I occasionally have to manually switch mine to BT Audio on the Z10 when a call comes in. There should be a button on the phone screen for it. Kind of annoying.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Bluetooth not working properly with pc suite

i have pc suite version 6.80.22 using windows xp sp2
i have toshiba bluetooth built into my laptop.
i asume when my computer turns on (and subsequently the pc suite which runs at startup) for it to automatically find my nokia n80 fone.
the problem is that it doesnt, and when i go to manage connections option it gives a list of connection options.
there are 2 bluetooth options, the microsoft one is already ticked but the toshiba one isnt.
so i tick the toshiba one and automatically it finds my nokia phone. but the problem is that this doesnt save. the next time i turn my computer on again i have to do the same thing, i have to tick the box for the toshiba bluetooth as connection option.
does anyone have any ideas how to get around this?

lucky you, my pc suite doesn`t even see the bluetooth (doesn`t show up in the connection wizzard)
what driver are you using?
but try the steps on the link to replace the xp stack for the toshiba one:
http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html?page=1
hope it is of some help

In ios7 Bluetooth not working with my ipod touch 5G

In ios 7 upgrade bluetooth not working properly... It's always searching ... not detecting even ipad with ios7 (bluetooth on).
I was expected 7.0.3. but no use...

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the BT device
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Since uploading iOS7.03 my iPhone 4S cannot get WiFi and Bluetooth is not working properly.

Why will my iPhone 4S not work properly since the iOS7.03 upgrade? No WiFi (greyed out, button will not move) and Bluetooth not working.

it's a well known issue.... wifi and bt died in many 4s.... one is mine..

Nokia Lumia 720's Camera Is Not Working Properly

I have a nokia lumia 720 phone.
Os- WindowsPhone 8.1 cyan
My phone's camera is not working properly.
Sometime the camera closes automatically.
And some pink lines appear in the screen.
Sometime camera don't open when press the camera key or click camera app.(it just opens and closes)

Hi. After updating the device to Lumia Cyan, did you also update the system apps? If not yet, please scan the QR codes found on the below link:
http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082
Aside from the built-in camera, are you also experiencing the issue with the other lens apps? Also, please confirm. Did this issue arise after updating the device to Lumia Cyan?
If you have updated the system apps and the issue is still present, try resetting the camera settings of the device. Go to Settings > applications > photos+camera > reset camera.
If you have identified that the issue also happens with other lens apps, try pressing and holding both the volume down and the power keys for 10-15 seconds. The phone will vibrate. It will restart afterwards.
Keep us posted.

Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
Related information....
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Bluetooth and calls are not working properly

Please somebody help me!!!
I have a Hyundai Elantra 2012 and a Curve 9300, the bluetooth has been working fine for a year, however my phone is having problems to connect to my car, what is funny is that I can watch a video and the sound will come out from my car's speakers, I can be listening to a mp3 by using the car's speaker, but phone calls won't get through, I tried to connect my wife's BB10 to my car and everything is perfect.
My question is, what went wrong???
Thank you!!!

I have a similar problem
Product - HP Pavillion dv6 7135nr
OS - Win 8
Bios - F24
After updgrading from win 7 to win 8 following are the issues I am facing
a. Wi-Fi not working
b. Bluetooth not working
Earlier I spoke to online chat and on their advise updated the drivers for my laptop
From the link
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5273543&a...;
Following were installed successfully but still the wifi n bluetooth are not working
1. Ralink 802.11 Wireless LAN Adapter - but problem is not resolved.
On troubleshooting the network connection - I'm able to enable / disable the wireless adaptor but not able to connect. as it says its OFF.
The wireless on/off function key is continuously showing red light and its not switching on
2. Broadcom Bluetooth Software - was installed when i connected through lan cable.
3. Also installed the latest broadcom driver frrom ftp://ftp.hp.com/pub/softpaq/sp61501-62000/sp61836.exe was installed
4. The HP Wireless Button driver sp59835 available at
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-112632-1
was also installed
Funnily, at times the wifi starts working and the colour of the F12 key changes to white after the laptop has been on sleep mode. Although this does not happen everytime it wakes up from sleep mode.
Pl. give some solution

Bluetooth not working when using thunderbolt

Hello,
Since the Macbook Air and Macbook Pro Update 2.0 released early november, my bluetooth mouse is not working properly when I use a thunderbolt port (with an ethernet adaptor). This is for the Macbook Pro retina 15inch, and both thunderbolt port produces the same effect. All was working well before the update.
Anybody else having this problem? Any solution?
Thank you.

I have just got a Nokia 2760 and BlueSoleil BT with a USB dongle. Same diagnosis, I can perform certain functions including:
- adding contacts using Phone Browser
- seeing and adding files using the BlueSolei SW, but I cannot see (and edit) the contacts folder.
Same diagnosis from PC Suite, that connection to the phone cannot be established, but it is obvious that it is connected!
Very annoying fault!
Hope to find a solution fast!
Hans-Henrik
Hans-Henrik
Nokia Novice

Bluetooth not working properly in nokia xl

Similar Messages

Maybe you are looking for