BlueTooth not working while Wi-Fi function is ON

Hi all,
FYI: My iphone Bluetooth connection is not working with wi-fi left ON. I can accept call and over side can hear me but on my side speech is interrupted every 1-2 seconds, basically I'm loosing about 80% of conversation. Only switching Wi-fi off fixing my problem.
Also my speaker so low (ring,speakerphone and ipod function) compared to my daughters iphone purchased in September, I would say about 25-30% lower.
My setup iphone 4GB Ver 1.1.1 (from June 29 batch) + BMW Bluetooth.

Just a hunch, and this may not do anything, but try re-paring the headset with the phone... If you go to settings -> general -> bluetooth you just select the headset in the list & delete it, then pair it like you did origoinally...
Sometimes this will fix the problem, sometimes not...
One thing that also may be playing a role (and now that I think of it, it may be likely) is that bluetooth & wifi use the same spectrum (2.4GHz) and though I don't usually have issues, they can conflict.
One last thing to note is that there are other things that can interfere with bluetooth headsets. Me and my wife were trying to test ours with mixed results until I finally figured out that our problem was that our headsets were conflicting with eachothers... If we both used them right next to eachother there were major problems. There are also wireless phones that use the 2.4GHz which also can conflict...
Some things to consider...

Similar Messages

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

PHP- Oracle not working- Call to undefined function OCILogon() ERROR

Hi,
I am trying to just do a test program to test php - oracle connection,
My versions are: php5.2.1-Win32 and Oracle 10g
I have made the following settings:
1.) Uncommented the following lines in php.ini:
extension=php_oci8.dll
extension=php_oracle.dll
2.) Set extension_dir = "C:\php-5.2.1-Win32\ext"
Changed the httpd.conf file as: ADDED
1.)LoadModule php5_module C:/php-5.2.1-Win32/php5apache2.dll
2.)PHPIniDir "C:/Program Files/Apache Group/Apache2/conf-"
3.) LoadFile "C:/php/php5ts.dll"
4.)<IfModule php5_module>
<Location />
AddType text/html .php .phps
AddHandler application/x-httpd-php .php
AddHandler application/x-httpd-php-source .phps
</Location>
</IfModule>
5.) AddType application/x-httpd-php .php
AddType application/x-httpd-php .phtml
AddType application/x-httpd-php-source .phps
But when I am tryin to run the following program:
<?php
echo "<h1>OCI Test</h1>\n";
$conn=OCILogon("system", "sheetal16", "orcl");
$stmt = OCIParse($conn, "SELECT table_name FROM user_tables ORDER BY table_name");
OCIExecute($stmt, OCI_DEFAULT);
while (OCIFetch($stmt)) {
$table_name = OCIResult($stmt, "TABLE_NAME");
echo "$table_name<br />\n";
OCIFreeStatement($stmt);
OCILogoff($conn);
?>
I am getting the following error:
OCI Test
Fatal error: Call to undefined function OCILogon() in C:\Program Files\Apache Group\Apache2\htdocs\test2.php on line 3
Please help me to solve this problem.
Thanks,
Sheetal

See Re: PHP- Oracle not working- Call to undefined function OCILogon() ERROR

Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

The Mac was recently upgraded so it is the Mac, or is it?
Looking for a common denominator: I'l start with wi-fi as the common communication medium.
Known:
A) Broken: iPhone —> wi-fi —> Mac.
B) Broken: iPhone —>USB—> Mac.
C) Broken: iPhone —> Bluetooth —> Mac.
D) Working: Mac —> USB —> other USB devices.
Unknowns:
E) Test Mac —> wi-fi —> a non-iPhone router.
F) Test iPhone —> wi-fi —> another wi-fi device.
Given not A, not B and not C either the Mac or the iPhone could be the culprit.
1) E        | F        : Non sequitur (deepens the mystery).
2) not E | F        : The Mac is the common denominator.
3) E        | not F : The iPhone is the common denominator.
4) not E | not F : All heck broke loose.
For case 1: It would be something on the Mac that prevents it talking to the iPhone through three media even though it can talk to other routers over wi-fi. That would be weird indeed, given the iPhone is talking to other wi-fi devices with no trouble.
For case 2: All of the Mac’s intranet media broken (wi-fi, Bluetooth, and wired-USB) and at least wi-fi works on the iPhone. Something weird is going on in the Mac.
For case 3: The iPhone router function is broken. Upgrade the iOS? Test using another iPhone?
For case 4: Throw everything in the trash and start over.

Iphone 6 plus fingerprint is not working while charging

My iphone 6 plus fingerprint scan is not working while charging. Is this normal?
I tried my iphone 5s and it works just fine even while charging.

I think I got an answer to my own question
If you're using generic lightning cable (non-original lighting cable), the fingerprint scan doesn't work while charging.
I just find it weird as my iphone 5s works even if i'm not using the original lightning cable though.

In ios7 Bluetooth not working with my ipod touch 5G

In ios 7 upgrade bluetooth not working properly... It's always searching ... not detecting even ipad with ios7 (bluetooth on).
I was expected 7.0.3. but no use...

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the BT device
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Webcam and bluetooth not working in my G570 on Win7 ultimate

Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

hey Nambiar,
uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
once done, see if you're able to use it.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+ tab number does not work, is that intended functionality?

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+<tab number> does not work, is that intended functionality?

This can happen when the video player (Flash plugin) has the focus.
In that case the plugin consumes all the key presses.
You will have to click with the mouse elsewhere on the page or in the user interface to make keyboard shortcuts work.

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT4623 In My Iphone 5 my Wifi and also Bluetooth not working , so what should i have to do ,,,,,,

Hi Friend
1. My bluethooth not working and not connecting to other Devices
2. My wifi also not connecting .
So what should i have to do
As i am using i Phone-5
pls suggest me
send me mail
[email protected]

Hi Friend
1. My bluetooth not working and not connecting to other Devices
2. My wifi also not connecting .
So what should i have to do
As i am using i Phone-5
pls suggest me
send me mail
[email protected]

Bluetooth not working - T61 - PLEASE HELP :(

I read a few of other threads about bluetooth not working on T61.
What I tried:
Enabling the bluetooth adapter from BIOS (was already enabled)
No light showing up on the front of the laptop (turns on very briefly when I turn the laptop on)
Tried fn+f5 and it wont turn on (wi fi is).
I installed hotkey driver, rebooted a few times, still nothing.
When installing bluetooth driver, it says the device couldn't be found.
I used bluetooth before, then I reinstalled windows 7 and it stopped working.
Any ideas?

I got the same problem and it seems like Lenovo just don't care about it. I've already installed all the updates from Lenovo and Windows and newest Bluetooth drivers from Broadcom....still nothing.

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

Why is my bluetooth not working??

Why is my bluetooth not working?
Trying to get pics off old phone onto my iphone5

iantheblade wrote:
Why is my bluetooth not working?
Trying to get pics off old phone onto my iphone5
This has never been a feature of iphone/ipod/ipad.
Bluetooth is supported for handsfree telephone, stereo speakers/headsets, some keyboards, some apps, tethering if provided by the carrier.
File transfer has never been a feature.

Installed iOS7 update and now wifi and Bluetooth not working

My daughters 4s has never skipped a beat - perfectly reliable. Just updated iOS7 with update and now both wifi and Bluetooth not working. Wifi is greyed out and when you go into bluetooth the busy twirly symbol is constantly going round. Can someone please help me as I'm pulling my hair out! My other Daughters iphone 4s is fins BUT she has not downloaded latest update - and she won't until this is resolved. If needs be I will take to store and DEMAND for it to be sorted out - either by repair or replacement as it is wholly a seemingly software issue and nothing wrong with the phone.
Gutted really as I am a huge Apple fan and customer with ipods, phones, iMac & iPads all around. If this is not resolved I fear an Apple drought may begin!

..... ty for the link, however this is the first result googling the issue..... of course it did not work....
it is really unbelivable that plenty 4s devices suffered the wifi troubleshooting just after upgrading to ios7, and finally.... i should burn wifi and bluthoot, and another hardware problems should cause % battery value is disappeared....
all this in one shot....
firmaware is not well working or is somebody bombing our devices to force us to switch to newest?

BlueTooth not working while Wi-Fi function is ON

Similar Messages

Maybe you are looking for