Bluetooth of when g4 running 10.5.6 boots
hi Iam new to macs but have a blutooth mighty mouse, all was working fine for a week, when i boot my mac the mouse was working fine, but now when it boots the mouse doesnt work, i plug my usb mouse in and attempt to send a file to my phone and i get a message box saying "bluetooth is turned of would you like to turn it on", i turn it on and all works fine until its rebooted, i can find anything in preferances, is there a keyboard shortcut to turn the bluetooth on? or is there a fix for this prob.
Thanks in advance for your help
Hello m:
Welcome to Apple discussions.
Try trashing the preference file (com.apple.bluetooth.plist) and restarting.
I would also reset the PRAM:
http://support.apple.com/kb/HT1379
Barry
Similar Messages
-
What are the criterias to consider while deciding when to run the mrp?
Hello Friends,
Actually i was just thinking,if any company wants to run the mrp for planning than how to decide,when to run the mrp(daily,weekly,monthly).
One of the factor,while deciding this could be the raw material procurements,right?if they procure raw material once in a month than they should run the mrp once in a month.(even we can control this by keeping monthly lot size,if you run the mrp every week).
What could be the other reasons?
Thanks and Regards,
Jitendra ChauhanDear Jitendra,
As said by our other forum friends it depends on the business requirement.
In one of my project as the client were recieving monthly plan for their production MRP was carried out monthly.
It can be based on the production plan or say sometimes the maximum lead time for producing a product.
Also Check this link,
[MRP Activities|http://www.sage.co.uk/sage1000v2_1/form_help/workingw/Subfiles/mrp_activities.htm]
Regards
Mangalraj.S -
Did a clean install 10.9.4. on a Apple Stock 1TB Fusion Hard Drive. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX" in every dev/disk** Everything is out of place, How can I repair? Im willing too reformat if need be, however thats what I did in the first place. Any help would be much appreciated, thank you.
I know this cannot be correct
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: *121.9 GB disk7It appears as if my startup disk has been reversed and not using the fusion ssd portion as it should. At least its now reversed as to what it used to be originally before. the 128gb ssd used to be on top. Is my mac booting fusion correctly? Thank you for responding as I was about to reformat.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
=========================================================
Name: fusion
Status: Online
Size: 1120333979648 B (1.1 TB)
Free Space: 114688 B (114.7 KB)
|
+-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 999345127424 B (999.3 GB)
|
+-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
Disk: disk2
Status: Online
Size (Total): 1111826497536 B (1.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion
Volume Name: Fusion
Content Hint: Apple_HFS
FoHeazys-Mac-mini:~ FoHeazy$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2 -
When you run the Adobe Creative Cloud opens a blank window, without authorization...
When you run the Adobe Creative Cloud opens a blank window, without authorization, without a list of programs, just empty, as in the screenshot
Hi Vetal1000 ,
Welcome to Adobe Forums
You can use the below mentioned links for solution -
http://forums.adobe.com/message/5509684
or
http://forums.adobe.com/thread/1251577
Let us know if that helps !
Thanks
Garima -
How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.
Ask the headset manufacturer.
Barry -
When I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!
Recover software as you have described is pretty much your only option - keep in mind that if wait, some of the currently recoverable data may well be over-written and lost.
-
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
When I run the Apple Software update, it tells me that iCloud and iTunes have invalid signature and will not be downloaded. When I DL iTunes64setup.exe, the program will not start (there's a bar that flashes but nothing actually begins). I've done everything short of reinstalling Windows to fix this (system resore, unistalling all Apple products, taking down firewall, running Windows FixIt - which either won't find the problem or gives me an error saying that the troubleshooter cannot be downloaded at this time, going into the security features to allow programs without valid signatures, trying to install earlier versions of iTunes). It all started when I downloaded the Decemberists new album on my iPhone, and it wasn't downloading it properly so I connected it to my Dell, but some songs still wouldn't DL - also, the newest OS for my iPhone still won't install via WiFi - and so I uninstalled iTunes first, but nothing is helping. And I don't have any security issues (Norton has checked). Any ideas? I'm at my wit's end after 3 days of this. Thank you.
Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!
-
When MRP run through background process in MDBT open PR and PO not comming?
Hi,
When MRP run through backgroung process in MDBT open PR and PO not coming in MDBT result.
Pls advise accordingaly.
Regards
rkRam,
Either I am totally misunderstanding your statements, or your business people are misinformed.
The output of MD01 (MRP total run in foreground) and the output of MDBT (MRP total Run in Background) ARE IDENTICAL, provided you have selected the same parameters.
Neither output contains a discrete listing of open Purchase orders and Purchase requisitions.
Standard output of both MD01 and MDBT are:
1. List of materials processed, with exception messages
2. Statistics
In addition, both of these programs also write MRP records to the MRP databases, provided that the "Display Material List" parameter is set. In this case, both of these programs will produce data that can be further reviewed and managed in MD05 and MD06. MD06 is the tool that most planners use to process the MRP database info.
If you wish to see a listing of the entire MRP results (either MD01 or MDBT), then execute transaction MDLD. This will produce either a spoolfile or a printed document.
For the PO or PR listings, review my earlier suggestions.
Rgds,
DB49 -
I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?
On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young -
In IE, when I run these reports, I have the option to Open, Save, or Cancel. In Firefox it just goes directly to a folder to Save, there is no Open option, which I need. I want to view the report immediately, not save it.
I figured it out - Tools, Options, Applications. For Excel, change to Always Ask.
-
Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi 130 KBother problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2
-
The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid -
Layout Change when program run in background.
Hi All,
I have a layout field on the selection screen. When I run the program in foreground, iam able to see the change in the layout in the output. When I select a layout name and run the report in background, Iam sending a file to the application server. Now, when I give the layout and run the report in background, the file iam sending to the app server should have the same layout which i have selected in the selection screen.
Please help with some example code.
Thanks,
Guru Charan.Hi Amit,
Thanks for the reply. The program can be run both the ways. When it is run in the foreground, Iam changing the layout with the help of REUSE_ALV_GRID_DISPLAY. It is working.
But when iam running in the background, I have to send a file to application server with the same layout.
thanks,
Guru Charan. -
Hi,
I've installed Oracle EDQ on an AWS Windows 2008 instance. I installed "EDQ 12.1.3 Quick-Start". The installation went through without a hitch. The Oracle EDQ Application Server, Oracle EDQ Config Store and Oracle EDQ Results Store services are running. However when I run dnConfig to change the 32 bit JVM to the 64 bit version, I get the above error.
Can anyone help resolve this issue?
Warm regards
Feroze ArifHi Feroze,
A word of warning. You shouldn't be trying to change the bitness whilst the services are running. This will cause you a whole world of problems.
regards,
Nick
Maybe you are looking for
-
What happens if your iWatch is stolen?
Hi, I watched the live event announcing the iWatch and am very concerned about the iWatch becoming another target for new or old criminals. Nobody has mentioned anything about how safe or secure the watch is. Many people have been beaten or even mu
-
I have problem in itunes i updated iphone 4s and could not be updated an unknown error occurred 3194
i have problem in itunes i updated iphone 4s 5.1.1 and could not be updated an unknown error occurred 3194
-
How to upgrade from OS X 10.7.5 to Mavericks
Hey guys I recently got a MacBook 13 inch - early 2008 and it has Mac OS X 10.7.5 and I cannot upgrade to Mavericks. When I try to install Mavericks on the app store, it tells me Mavericks cannot be installed on this device. Suggestions and thought
-
Capture only the email address in a muse form
How do you create a form in Muse where you capture only the email address?
-
How to Provide the Certificate Generation key while configuring WorkFlow Manager 1.0
Hi, I am new to Workflow manager.I am configuring it in a SharePoint Farm with Allow Workflow Management over Http on this computer option. Its asking for Certificate Generation key for joining to the Farm. Could anyone help me how to get the Certifi