Bluetooth on both my iphones won't work since I updated it to iOs 5.0.1.

Someone has any advice how to fix this? The proble is that niether of my iphones at home (4 and 4s) are discoverble with bluetooth on my iPad or Mac, however they are both discoverable on a friends LG phone. So my question is, how can I fix this?
I use Bluetooth mainly to connect my iPad to it so I can use the internet on my iPad when there is no Wifi.
Thanks
AMV

Follow the instructions here:
If you can't update or restore your iOS device

Similar Messages

  • Wlan won´t work since last update

    Hi since my last pacman -Syu i can´t use my Wlan. It loads the modul without any errors. But when i drop the "Wlan-button" my computer freezes!!!
    I also changed from devfs to udev!
    Any Ideas??

    Nov 10 2004  Changes in 0.13
        * Modified SW/HW rf_kill interaction functionality. See README.ipw2200 for details on current usage.
        * Fixed #239: iwconfig eth1 rts off/auto not supported
        * Fixed problem with not being able to associate with non-broadcast ESSID APs
        * Changed default temporal timeout for scan age to 15s
        * Changed MAC2STR and MACSTR to MAC_FMT and MAC_ARG
        * Fixed problem with scan results not expiring
        * Fixed a bug in ad-hoc support (#295) that prevented the creation of a new ad-hoc network
        * Reduced interval of scan requests to 1/10th second (vs. 5 seconds)
        * Modified scan logic to alternate between directed and active scanning when an ESSID is defined. This should improve AP to AP roaming via ESSID selection.
        * Increased dwell time on directed scans to 100ms from 20ms
        * Fixed fragmentation for both wep and with no encryption
        * Fixed wireless stats reporting to indicate that the noise level is invalid. This version of the firmware does not provide noise statistics.
        * Fixed a bug that prevented 'iwpriv ethX set_mode N' from working correctly

  • Websites are formatted incorrectly and links won't work, since last update

    Since I installed the latest updates for firefox certain websites such as : http://www.escapistmagazine.com/ and hotmail , are incorrectly formatted and the links on the pages don't work. I can load my inbox on hotmail but the links to the emails don't work ie. you click on it and nothing happens. On the Escapist many of the links don't match the boxes they should be in, sections of the page are in the wrong place with images not loading, and many of the links don't load the right page, if anything at all.
    I've tried to use the report broken website function but this gets stuck on sending report and if you click submit report again it shows the details etc as being blank.
    I've tried restoring FF to defaults and also reinstalling it with no success. I know the website are okay as IE loads them correctly.
    any help appreciated

    Hi Rick,
    Interesting thread on Quark's forums. Mark Douma posts here, too. Very knowledgeable with the how fonts work in direct relation to the OS.
    I just opened a bunch of OpenType fonts and launched Quark. No problems. But as Mark noted, you'll see the bug pop up after a restart and then try to open the document that uses the OpenType fonts.
    However, I created a simple document using a half dozen different OpenType fonts and saved it to the desktop. Going by Mark's assumption about the cache files, I shut down my Mac and turned it back on. Essentially the same as turning it on the next day. Per his thoughts, I left the font cache files alone, activated the fonts again in Suitcase Fusion and launched Quark 6.52 by double clicking the document I had just created. Quark and the document opened without a hitch.
    Per Mark's post at Quark's forums, Quark should have crashed since I'm doing this all under 10.4.10. That tells me that while the font cache files are the problem for those who need to keep clearing the cache files to get OpenType fonts to work each day, it's not due to OS 10.4.6+. Since I'm having no issues (and never have), I would have to believe it's more likely to be a damaged OS that's causing the problems. If the OS is damaged, then the likelihood that it will in turn write damaged cache files is high.
    Or, Quark is damaged. It writes its own font cache files in the /Applications/QuarkXPress 6.0/jaws/ttfont/ folder. If you cleared only those cache files out and relaunched Quark, it might work without clearing the system cache files. That would tell you for sure that Quark needs to be reinstalled rather than the OS.

  • Car charger iphone will not work since i updated to ios 5. The apple charger i bought said it was campatible wiith 3gs but every time i plug it in it says on my iphone that it does not support this device

    Please help!!!!!

    iPhones don't have to "support" a charger. You likely have fluff / debris in the docking port of the phone. Try cleaning it out *very carefully* with something like a dry toothbrush.

  • FaceTime won't work since iso 6 updated to Iso 6.

    FaceTime won't work since iso6 update. Every time since I have updated to Iso 6, FaceTime will not work. When I try to FaceTime, after about 30 seconds it tells me that the connection is lost! My iPad is wifi only. Help!!!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I downloaded the newest version of iTunes and now my iPhone won't work.  What should I do?

    I downloaded the latest version of iTunes and now my iPhone won't work properly.  What should I do to try to fix this?  Should I uninstall the new version and if I do, what version should I install.  I am using Windows 7 and iPhone 4S.

    Welcome to Apple Support Communities
    They are different problems because I doubt that iTunes has been able to modify Mail, that has nothing to do with iTunes.
    As you are running 10.7.4, download and install OS X 10.7.5, the most recent Lion version > http://support.apple.com/kb/dl1582 After installing the update, you should be able to run Mail

  • My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    For anyone else wondering how to fix this, all I did was turn my iPhone off and then turn it back on.

  • Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

    Outlook 365 retrieves same mail over & over  --  stops and restarts  -- won't sync to iPhone  -- won't work with blue tooth in car  'm using Win 8

    Hi,
    How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
    http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
    Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
    get the most qualified pool of respondents there:
    http://community.office365.com/en-us/forums/default.aspx
    If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
    Please let me know the result.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Irish iPhone won't work with German simcard

    Irish iPhone won't work with German simcard! Can anyone help!? I bought it prepaid in Ireland with u2 but my German u2 card won't work in it?! Thanks for any advice!

    Yes, but they are different firms and O2 Ireland sell locked phones as far as I know so the german sim is not meant to work.
    From Apples site O2 Eire can unlock but not sure how well that would work if you are back in Germany now, as it usually needs to be active in the carriers country on their network.

  • My iPhone won't work on 3G I have to use wifi to do anything.

    My iPhone won't work on 3G it says it has full bars but wont send iMessages and the internet wont work. Help please.

    Contact your carrier.

  • My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    Connect the phone directly to the computer, not a hub.
    Disconnect all other USB devices except keyboard and mouse.
    Disable your firewall
    Disable your antivirus
    In iTunes if it recognizes the phone click "Restore"
    If it doesn't recognize the phone:
    Disconnect the phone from the phone end, leave the USB cable plugged into the computer
    Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
    While holding HOME connect the cable to the phone
    As soon as iTunes recognizes the phone release the HOME button and it should restore.
    If neither procedure works note the exact error message and post it.

  • Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? How can this problem be solved?

    Dear all,
    I am new to this community even though I have been a Apple user for years, so please forgive me if this question is not in the right section.
    Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? I've always been happy with these two products until the update - now the battery life is considerably shorter which is extremely frustrating.
    How can this problem be solved? Is there any way to go back to the previous version?
    Thanks for your help.

    If you update using iTunes the phone is first wiped clean, then the new OS is installed, and finally the backup is restored. After this finishes if you sync your music should be restored. Music is not in the backup, because it is already on your computer and duplicating it would use up a lot of hard disk space.
    An OTA update just patches what has changed; it does not disturb content.

  • FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

    FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • How can I turn on my Iphone, it is working since yestarday an actualization and it doesn´t respond

    How can I turn on my Iphone, it is working since yestarday an actualization and it doesn´t respond

    Going to need more info.
    What were you doing with your prior to it turning off?

  • HTC DNA Backup Assistant won't work since 1/1/13

    HELP!  No matter what we've done - hard reset and GOT A BRAND NEW HTC DNA - still backup assistant won't work since 1/1/13.  This is NOT anything to do with Facebook.
    This all started with that same 1/1/13 error that so many of you got.  The tech also had me clear the contact storage.  That worked for the error.  But since then I don't have contacts.  I have talked to at least 7 Verizon techs, one HTC tech, then spent 2.5 hours in the Verizon store today.  Ended up with a brand new HTC DNA (mine was only one week old) for free.. and we immediately tried to sync to Backup ASsistant and it still won't work on the new phone.  I have 521 contacts stored online in My Verizon Backup Assistant and they will not, no matter what we try, sync to my phone.  So frustrated.  Anyone else experiencing this?
    ~Tami

    After all my hell- after so many calls and trips to Verizon...as well as getting a new phone..... guess what FINALLY worked: 
    http://www.droidxforums.com/forum/droid-x-faqs/10144-migrating-contacts-phone-backup-assistant-google-contacts.html
    Now I finally see ALL my contacts in "people" when I select my phone icon and people.  But now I'm trying to test it out by composing a new text message and all these people aren't showing up there.  Does it just take a lot of time!?!?  Since I did import 524 contacts from BUA to Google?... will it just take time for these contacts to be available for me to text!?!?  HELP.. (again).

Maybe you are looking for

  • Slideshow in Elements 9: Shows some pictures as "broken"

    Hi When I run a slideshow from Elements 9, the "View/Edit/Organisein Full screen" option, quite a few of the pictures appear "broken" and a "broken" type icon appears.  It seems to get worse after that. I'm showing an album of 90 pictures, mixture of

  • Restore ( duplicate) db from tape backup from one server to another server

    I am looking for step by step process to restore (duplicate)db from tape backup from one server to another server Thanks

  • Insert records from report program into R3 table

    Hi I wanted to insert records from report program into R3 table. here is my code data : itab type standard table of zemp initial size 10 with header line. itab-EMPNO = '012'. itab-ENAME = 'XXXX'. itab-JOB = 'XXXX'. APPEND itab. insert ztable from tab

  • Automatic Purchase Requisition

    Dear Gurus, Plz. help me out in configuring the scenario My client had two plants one at Bangalore and the other at Mumbai. If we rise the sales order from Bangalore Plant, the system should automatically trigger purchase requisition as we procure th

  • Call transaction MMBE from another program and press Back button

    Hello, I have program that is used as a 'launch pad' for some of our heavily used transactions. When I call the main 'launch pad' program, the user will select a button and a Call Transaction MMBE is initiated (USING the first screen). The user selec