Bluetooth on Macbook Pro dead in Leopard

When I first booted into Leopard after an upgrade installation, my bluetooth mighty mouse worked fine. I did a software updated and restarted at which time the mighty mouse failed to work. I have tried the following:
Safe boot
Turning mouse off and on repeatedly
Regular restarts
I suspect the issue is between the MBP and Leopard as when I go into the bluetooth section of networks I get "Bluetooth not connected". I think this means that Leopard is not finding my onboard bluetooth module. I have one of the original MBPs. Any help would be greatly appreciated as I am on my second round of calls after having been disconnected from the Apple support line the first time. First time since about 1987 I've called Apple tech support.

Hi David,
Try doing a PRAM reset. Let it chime at least five times instead of the recommended.
http://docs.info.apple.com/article.html?artnum=2238

Similar Messages

  • MacBook Pro and Sow Leopard video problem

    When I connect MacBook Pro using Snow Leopard to LCD projector, the projected image is very problematic. Two symptoms. First, the video has a flicker to it. Second. menu lists have overlapping double and triple images so they cannot be selected accurately. The result is that demonstrations of sofware such as Final Cut pro cannot be done effectviely. Does this sound like a vieocard giving up and needing logic board replacement?

    Thanks for your reply.
    In the Print and Scan Preference how many printers do you have installed? - one.
    If only one which I assume is USB, try installing the Cannon as a network printer. - It doesn't specify that it is connected by USB. It says that it is "in use, Default". There is a tick in the box alongside "Share this printer on the network". Is there somewhere else that I need to access to install it as a network printer?
    If you have already installed it as a network printer  open the print queue from the Print and Scan. Click on the Printer Menu and run Netwrok Diagnostics.
    I entered the print queue but there is no option to click on Network Diagnostics because it is greyed out.
    There are tick boxes alongside:
    Screen sharing
    File sharing
    Printer sharing
    Scanner sharing
    Remote login
    Remotemanagement
    Remote Apple events
    Internet sharing
    Bluetooth sharing
    with a tick alongside Printer sharing.
    Many thanks.

  • My phone is not listed on the itunes device sidebar when I plug in with the usb cord ... cant figure out why.... did just update macbook pro to snow leopard though?

    My iphone is not listed as a device in the itunes side bar after i plug in to usb port?   It used to show up fine - only change I think is that I upgraded macbook pro to snow leopard?  Any ideas of what I might need to do?

    http://support.apple.com/kb/HT1747
    follow this link. see if it helps.

  • HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

    Hi,
    I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

  • I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

    I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

    mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
    Not sure where these hard disk folders are located that you are referring to?  Finder, Finder tool bar, Finder side bar, Desktop, Dock? 
    More then likely they are  an alias that not longer point to the orginals,  thus the question mark.
    I would reboot.  Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

  • I have a new l7 macbook pro running snow leopard.  When I try to boot into windows7 32bit, I get either a blue, black, or flickering screen.  Then I have to physically shut down and try again.  At that point it will load correctly.  Any help?

    I have a new l7 Macbook Pro running snow leopard.  When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times).  I finally downloaded the bootcamp windows support to a flash.  I inserted that and finally got it installed.  Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up.  If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up.  That will generally let me boot into windows for the remaining of the day.  The next day, the same thing happens again.  I have tried reinstalling several times, and the same thing keeps happening.  It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro.  Anyone know how to fix this?

    I own HDM 2011. But they have products that aren't listed or hard to find too.
    Recommending Pro version for one user's needs:
    http://www.wilderssecurity.com/showthread.php?t=297756
    Pro vs HDM 2011 feature comparison
    http://www.paragon-software.com/home/hdm-personal/comparison.html
    Forum topics:
    http://www.wilderssecurity.com/showthread.php?t=297756
    http://www.wilderssecurity.com/showthread.php?t=303155

  • I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

  • Recently updated m old 2004 macbook pro to snow leopard 10.6.8, I opened a word doc. and it automatically opened in iwork '08? Now I can not print old or new docs? Help - do I have to update to iwork? Is this an update or do I have to buy iwork?Thanks

    I have a couple of questions? 1. I recently updated my old '04 macbook pro to snow leopard 10.6.8, when I went to open an old word doc., it opened with iwork and will not allow me to print until I update to iwork'08. Do I have to update? If I do, is this an update or do I have to purchase iwork? 2. Can I update my old '04 macbook pro to Lion or Mountain Lion or is this too much? I just purchased and iphone 5 but do not know if Snow Leopard can give me the future updates I might need?? Also does icloud work with Snow Leopard? Thanks for help, I am lost...

    Try resetting your SMC and NVRAM before attempting to install again.
    Resetting the NVRAM/PRAM
    Note: This will not delete any data.
    The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Turn on the computer by pressing the Power Button.
    On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
    Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
    Release the keys on the built-in keyboard.
    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    I hope I helped.
    Austin

  • I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

    I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

    rayvonr wrote:
    ...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
    1)  Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
    DO NOT install Mavericks over Snow Leopard!

  • If I upgraded my MacBook Pro from Snow Leopard to Lion via the web and now wish to erase the hard drive and restore it to factory settings to sell.  How do I accomplish this?

    I upgraded the operating system on my MacBook Pro from Snow Leopard to Lion via the web.  Now I need to erase the hard drive and restore it to factory settings, so that I can pass it on.  How do I accomplish this?  When I insert the Mac OS X install disk, the only option is to erase the free space.  Any insight would be appreciated.
    Thank you

    You need to boot off the original Snow Leopard DVD's that came with the system.
    Once you are running off of the DVD you will be able to do a clean install of SL
    To boot off the DVD with the system up running Lion insert the DVD. Open Sytem Preferences->Startup Disk and select the DVD then restart the machine.
    Message was edited by: Frank Caggiano

  • I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard.  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard?  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
    1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
    2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
    You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
    After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
    3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

  • Which final cut is best for macbook pro with snow leopard?

    which final cut is best for macbook pro with snow leopard?

    Probably FCP 7 which is part of Final Cut Studio 3.

  • We are having old home movies put on DVD's. How do we import them to MacBook Pro using Snow Leopard and iMovie 8.0.6.  Can watch the video, but can't get it to import.

    We are having old home movies put on DVD's. How do we import them to MacBook pro using Snow Leopard and iMovie 8.0.6?  Can watch the movies on the laptop, but they will not import.

    We took 3 video cassette 8mm that were recorded in the early 90's to a place that burned the videos onto 3 DVDs.  When inserted to our Mac, the DVD player comes on to play the DVD. Opened Quicktime, but can find no way to import. Went to File>Open File>Sony_DVD_Recorder_Volume. Clicked on Sony_DVD-Recorder_Volume and it shows a file named VIDEO_TS.  Clicked on that and 6 files showed VIDEO_TS.BUP,   VTS_01-0.BUP,   VTS_01_0.IFO,  VTS-01_1.VOB,   VTS_01_2.VOB, VTS_01_3.VOB.  Where is DVDxDV?

  • Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I get after the upgrade is done is the a blank page with the apple trade mark. I did restart the computer few times and all the same

    Trying to upgrade a MacBook Pro to snow leopard 10.6.3 and all I after the upgrade is done I just get a blank page withe apple symbol. I've rebooted the computer and nothing happens

    Upgrading from which Mac OS X?
    Is this v10.6.3 a retail disc?
    You can purchase Snow Leopard from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store

  • Where can I buy a 15" Macbook pro with Snow Leopard installed

    I would appreciate knowing where can I buy a 15" Macbook pro with Snow Leopard installed

    http://store.apple.com/us/browse/home/specialdeals/mac/macbook_pro/15

Maybe you are looking for