Bluetooth on office jet 150 not connecting

I have a Sony Vaio running windows 8.1 It sees the printer under bluetooth settings but it says missing driver ? 
It works fine with a cable but sadly not by bluetooth 
Please help
 Thank you
This question was solved.
View Solution.

Thank you that seemed to fix the issue. Only small hiccup now I need to turn printer off and on to re istablish connection if I shut my computer off and then on again . Which is no big deal .
Thank you for your help

Similar Messages

  • HP Office Jet 6500aPlus not connecting to wireless

    I have an HP Office Jet 6500aPlus, alomst 2 years old, working well.  No major issues.
    A couple of days ago, the printer showed offline.
    I have done the following:
    (a)  Unplugged the printer, reconnected to the wireless, printer the test page and it shows connected.
    (b)  From the 3 laptops and iPad at home, all show printer offline.
    (c)  I tried to go to apps from the printer, states no wireless access.  
               Did check the wireless connection, states connected.
    (d)  Connected USB cable and printed successfully.
    What might be the best way to get the printer on the network again!  I am an HP employee, so totally thrown off with this issue.  
    Thanks!!

    More than likely it is not going to work then. Getting printers to work wirelessly with hot spots is something that is not always guaranteed to work. I've seen it work, but it is very rare.
    Do you have any firewalls or virus-protection set up on your computer? 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!

    My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

    My Logitech bluetooth laser travel mouse does not connect at startup to my recently upgraded iMac. Even when this is configured. I need to configure the mouse everytime after startup!!... It worked fine with previous OS X .... How can I fix this??

  • How thick paper can the 'Office Jet 150 Mobile' handle for printing and scanning?

    I would like to know how thcik paper it's possible to use on the Office jet 150 Mobile - all in one printer?

    Ulrika wrote:
    I would like to know how thcik paper it's possible to use on the Office jet 150 Mobile - all in one printer?
    From the specifications:
    64 to 90 g/m2 (16 to 24 lb bond)
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Bluetooth keyboard and mouse will not connect

    I loaded a linux iso on a usb. Loaded it on a reboot. It may have been corrupted or something, because it did not load correctly. I rebooted the computer again and now the bluetooth keyboard and mouse will not connect. How can I fix this?
    Thank you.
    Ryan

    Hello:
    These are knowledge base articles:
    Reset PRAM:
    http://support.apple.com/kb/PH4405
    Reset SMC:
    http://support.apple.com/kb/HT3964
    Those may or may not help, but they will not hurt anything.
    Barry

  • Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or noteb

    Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or notebook. Worked fine last week, but over weekend just started having issues.

    It is very possible that you may have some form of Wi-Fi interference that has appeared recently that is preventing your Time Capsule (TC) from providing a clean RF signal.
    I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. Look for other Wi-Fis that may be operating nearby. Note those with the strongest signals and which channels they are operating on ... then change the channel used by the TC to be at least 3-5 channels away.

  • Bluetooth paired with Photosmart but NOT connected.

    Bluetooth connection on android device says paired with Photosmart but NOT connected. How do I get connected?

    You can always manage or configure the switch via HyperTerminal. You can connect the PC to a serial cable and access the switch via the serial port. Hyper Terminal doesn’t depend on the IP address of the switch so you can manage it. To access the switch via Hyper Terminal, follow this link: 
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=16613&p_created=1212...

  • Help setting up Bluetooth on phone/Mac! "Not Connected"

    Hi,
    I recently just got a new Motorola phone, its the same model phone I have been using for 2 years. My bluetooth was set up fine before, but I have been trying to set up my bluetooth between my new phone/Mac, and it hasn't been working.
    I paired both items to each other (with the PIN..etc), but when I select "Add Audio Device" on my mobile phone, it says "Macbook pro not supported", and on my bluetooth on my Mac it says its paired, but "Not Connected".
    I remember when I setup the bluetooth on my old phone I had to make one change to get the "Not Connected" to say "Connected" on my Mac...but I can't remember what it was.
    Any help would be great, Thanks!

    Post your question in the Boot Camp discussions:
    http://discussions.apple.com/forum.jspa?forumID=1165

  • The bluetooth on my Mac will not connect to my iPhone 6.

    I am trying to connect my phone to my mac so I can use airdrop. The Mac will not connect to the phone. I checked my System Information and the Bluetooth on my Mac is LMD 0X4. I believe the problem is that it needs to be LMD 0X6. How do I upgrade?

    You do not need to connect/pair the devices to use Airdrop. All you need to do is have Bluetooth on and on the same Wi-Fi network. See this support document for answers to other questions about setting up and using AirDrop. Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • I cannot connect to printer with bluetooth with i phone office jet 150

    i cannot connect using bluetooth from ipad or iphone

    Hi,
    Apple's iOS does not support printing over bluetooth, it only allow printing through a wireless network connection. (802.11), as well the Officejet Mobile 150 is not an AirPrint printer:
    NOTE:Apple iPads and iPhones do not currently support Bluetooth printing. To print from your Apple mobile device, you can use HP's wireless printing accessory (sold separately). Go to Installing the HP 1200w NFC/Wireless Mobile Print Accessory to learn more.For additional information, go to HP Printer Does Not Support HP's Mobile Printing Solutions .
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03137985&lc=en&product=4231413&tmp...
    You may check the HP 1200w NFC/Wireless Mobile Print Accessory which adds wireless and AirPrint capabilities to the Officejet Mobile 150:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04127987&lc=en&cc=us&dlc=en&product=4231413
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect.  Help?  Have also reset network settings etc

    My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg).  It was the first time I'd used Bluetooth
    Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
    This is major as I am away from my desktop for three months.  Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
    So far This is what I've tried based on other discussions-
    -turned Bluetooth off and unpaired to keyboard which was also turned off
    - turned iPad wifi off and on (several times)
    - forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
    -- reset network settings
    What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling".  Sometimes the airport bars will show, but disappear or flicker.  It never connects with a check noted in settings.   Any attempts to use internet confirm there is no connection
    My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
    Any ideas!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Bluetooth paired my devices but not connected

    Hi everyone,
    I have this problem and maybe someone could help.
    Devices to pair
    Blackberry 7100
    GlobalSat Bluetooth GPS BT 338
    I have managed to get them paired and that is where everything starts to "not work". The embarassing thing is that I brought my macbook to the shop that sells the GPS and after telling everyone how cool the macbook is, I couldn't connect the Bluetooth GPS.
    I need the gps for my field assignment and if I can't get it to connect, I'll just use my windows laptop. I still think the mac is cool though and if I can find the solution, I'd feel vindicated.
    Thanks

    Hi:
    There are no dumb questions...answers, yes, but not questions.   Sometime I use acronyms and forget that I should explain things a bit more. 
    Resetting those two things sometimes helps and cannot hurt.
    SMC=system management controller:
    http://support.apple.com/kb/HT3964
    PRAM=parameter random-access memory:
    http://support.apple.com/kb/PH4405
    If that does not help, delete the phone from your computer (system preferences>Bluetooth), restart, and then add it back in:
    http://support.apple.com/kb/PH3660
    Barry
    P.S.  If everything fails and you are near an Apple store, make an appointment with a "genius" and take the devices in for them to assist.

  • Office jet x64 not printers from office

    HP OfficeJet Pro 8620
    Cannot print from Office applications (Word, Mail).
    PDF (Foxit) and Notepad print just fine.
    Tries this on Win7 Home 64bit with Office 2010, and Win8.1 64 bit with Office 2013.
    Both laptops have the same issue: printing and scanning work just fine, both wireless and usb, except when printing a document from Word or an email from Outlook.
    Tried installing all software, first from CD, update using the HP Doctor, checked Event Viewer (no logentries whatsoever).
    Please help!
    is it a 64bit Office issue? or a printer-transport thingy?
    I've read one post about changing the administrator profile, but I don't see how...?

    Wow.. we are looking for you.  This is a new issue which caused by the the temp/tmp folder doesn't have access or change to common folder
    First, let us fix your issue.
    Download the hotfilx Win7 hotfix  from microsoft and install it
    http://support2.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2762808&kbln=en-US
    You need to restart after installing the hotfix.
    For our records,
    1. We need your help to get the Office version number, (32 bit/ 64 bit) 
    2. Did you recently upgrade from Win 7 to Win 8?
    3. How many user accounts you have in your computer and their profies info.. admin privilates or standard user profile?
    Any other information you remember you did recently on this computer.
    Thanks,
    Praba
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • All in One HP Office Jet 6600 - not printing

    Just installed new ink cartridges, still recieve message "replace cartridges".  Is there any way to "reset" the printer? 

    Hello retiredfromwork,
    Welcome to the HP Forums!
    I understand you just replaced new ink cartridges, but it's still stating 'Replace Cartridges". I will do my best to assist you! Please try these steps in order to reset the printer:
    1) Make sure this printer is plugged into a direct wall. not a surge protector
    2) Take out all of your ink cartridges, close the door
    3) Remove the power cord at the back of the printer
    4) Try cleaning the copper contacts on the ink cartridge by following this HP document here
    5) Wait 60 seconds or more, then plug it back in
    6) Wait for the printer to turn on completely, then install the ink cartridges
    Please let me know if you're receiving the same message. Looking forward to hearing from you.
    I worked on behalf of HP.

  • Windows 8 and hp office jet 6700 not compatible

    Bought new computer with windows 8. Tried to load printer install disc for wireless printer..message tells me printer is not compatible with Windows 8. Need to know if this can be fixed and the steps to do so

    Hi,
    That's true for the CD because it was born before Windows 8. Please use the following package for your Windows 8 computer:
      http://ftp.hp.com/pub/softlib/software12/COL41871/mp-109007-2/OJ6700_1315.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • MB5B G/L  ACCOUNT AS SELECTION CRITERIA

    Hi experts I have to modify mb5b tranx prg . presently we are using date as selection criteria..but now onwards user wants G/L account along with date as selection criteria. I created one selec-option for field HKONT type hkont-bseg. Now in select qu

  • Strange Problem in File Archiving - Sender FTP Adapter

    Hi, The scenario is file to IDOc. XI has to read the input file from client FTP server and archive it to XI local file server. File is archived properly without FCC (for xml files). But with FCC, the sender FTP adapter is archiving empty files (0 kb

  • Logout and Login to CC does not fix the the Lightroom CC crash on launch issue for me.

    Any other fixes? Solutions? Adobe? Trial version of Photoshop CC, downloaded after LRCC, works with no issues. Please advise. 27 inch iMac Mac OS X 10.10.3

  • Exports too much time

    When I export a song to mp3, it gives me extra time at the end that i don't want. I have the end slider positioned where i want it but when I export to mp3, the 1:40ish song turns into a 2:30min song.

  • Tile based movement in flash as3

    Hello i am currently working on the engine for a tiled based game. I have set up the map using a 2 dimensional array. Movement wise i have just increased/decreased the x/y position of my characer by the same amount of pixels as my tiles. Anyway of co