BlueTooth Out of Service

I know there are same issues posted here and there. This is my case following:
My mas is iMac Early 2006. It has came back from repairing mother board just 10 days ago. (GPU issue)
Using MacOS X 10.5.7 or 10.5.8, BlueTooth module could be missing after system restart.
I can reproduce about 15~20% of system restart or power on.
This happens on 10.5.7 and 10.5.8 only.
This issue does NOT happen 10.4.11 or 10.5.0. This is S/W issue I believe.
I have reinstalled system software twice, but it does not help.
When I encountered this problem, I have found that -
- "IR receiver" is missing, and TWO Bluetooth USB Host Controller is shown under USB bus. -
Confirmed using system profile app, Under Hardware - USB - USB Tree.
Simply, just restart could solve this issue. (I can use Screen sharing feature on Leopard to do this)
Log Snippet from 10.5.8 System.log on start up:
Aug 9 06:33:00 localhost kernel[0]: Failing to load driver for new Bluetooth device: there is already a Bluetooth device in use on the system.
Aug 9 06:33:03 iMac-Early-2006 blued[47]: Apple Bluetooth daemon started.
Aug 9 06:33:04 iMac-Early-2006 kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f
Aug 9 06:33:04 iMac-Early-2006 kernel[0]: [InterruptReadHandler] Received kIODeviceNotResponding error - retrying: 1.
Aug 9 06:33:04 iMac-Early-2006 kernel[0]: [InterruptReadHandler] Received kIODeviceNotResponding error - retrying: 2.
Aug 9 06:33:04 iMac-Early-2006 kernel[0]: [InterruptReadHandler] Received kIODeviceNotResponding error - retrying: 3.
Aug 9 06:33:10 iMac-Early-2006 kernel[0]: [[0x3639000] Req OpCode 1005 from: kernel_task (0) status: 0 state: 2 timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Aug 9 06:33:10 iMac-Early-2006 kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f
Aug 9 06:33:13 iMac-Early-2006 kernel[0]: [[0x3639000] Req OpCode 1005 from: kernel_task (0) status: 0 state: 2 timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Aug 9 06:33:13 iMac-Early-2006 kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f
Aug 9 06:33:19 iMac-Early-2006 kernel[0]: [[0x3639000] Req OpCode 1003 from: kernel_task (0) status: 0 state: 2 timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Aug 9 06:33:19 iMac-Early-2006 kernel[0]: [AppleUSBHCIController][hardwareSetupComplete] Failed setup: 0x10 resetting
Aug 9 06:33:19 iMac-Early-2006 kernel[0]: [HCIController][hardwareSetupComplete] Failed setup: 0x10
Aug 9 06:33:19 iMac-Early-2006 kernel[0]: IOBluetoothHCIController::terminateWL .. done
//

I'm getting the same hciconfig up output.
Saw this thread https://lkml.org/lkml/2013/6/10/117 - which has a patch at the end of it, but it should be merged in 3.10. I upgraded to 3.11 just in case, same issue.
What's your lsusb output for this device? Mine:
Bus 005 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

Similar Messages

  • When iPhone is on Cellular data and WiFi, i cannot make calls and phone goes out of service.

    So I have this iPhone 5S unlocked version from the US which I am using in India. When I am connected to my office wireless and also the cellular & 3G data are switched on, my phone goes out of service and I cannot make calls. I can also use internet.
    However this works great when I get onto my home WiFi along with cellular & 3G data switched on, I can make calls and also surf the net with the WiFi.
    Is anyone having similar issue? I am sure there is something with the office WiFi but what could it be to get my phone out of service.
    Any thoughts anybody ?
    Thanks,
    UG

    Yes I shutdown WiFi and I can connect to 3G on Cellular. I can make calls.
    If I shutdown Cellular and connect WiFi. I can make calls.
    Its just that when both are ON, then no calls can be made.
    All combinations work good with Home WiFi. 
    -UG

  • My iPhone 4 doesn't connect to any wifi sources anymore (even though it used to) and regularly cuts out of service.

    My iPhone is from the US and I've had it for nearly two years. I'm with optus. I know that this is not allowed to be discussed but my phone was bought jailbroken. Neither my father nor I had any idea what this meant at the time and would not have bought it if we did know. My wifi connectivity worked fine up until a month ago when it cut out for no reason at all. Since then it cannot connect to any wifi sources. Also, my phone has recently been cutting out of service 1-2 times everyday. I understand that this may due to the fact that my phone is jailbroken. However is there anyway I could unjailbreak my phone? I'm not sure if it is factory unlocked because the iPhone wasn't bought from Apple even though it is legit. So is there really anything I could do to fix my phone? It's running on IOS 4.0.1.
    Please help me. I'm fifteen and I really have no idea what to do!
    Any help would be greatly appreciated!

    In settings>general> cellular do you have it  turned ON?

  • I lost my iPhone and when I'm trying to find it with the location, they say that it is "out of service". What should I do?

    Hello people!
    As I mentionned in my question, I have lost my iPhone I'm feeling very dumb, it is the second time that this happens to me and I really need your help! I don't even know what happened, but when I arrived home after school, I didn't find my phone. The fact is that I was sure to have take it with me, but I haven't, as I see. I went on the apple site: "location of my iPhone" and they told me that my cellphone was out of service. Now, I really don't know what to do and what to think. I serched everywhere, in my car, everywhere in my house, I even went outside to check, but i live in Quebec and it is snowing a lot this winter, so maybe I just didn't see it... Anyways, I'm really scared cause I have 3G on my phone and now they say that I'm not connected to 3G anymore, neither any other internet service. I'm freaking right now. Does that mean that my cellphone is broke, stuck in the snow, or just somewhere that I'm never gonna find out? I'm imagining all the worst possibilities so if you don't want me to die soon, please, help me (try to reassure me if it is possible but if is not, tell me the truth anyways).
    Thank you guys the one who is gonna help is going to have my recognition forever!
    Sabrina999
    P.S.-I'm a french Quebecor so if you don't understand my writing, I'm sorry

    You're welcome.
    Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
    You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

  • 'our IMAP server appears to be temporarily out of service' - help !!

    When logging in I get this error message on my e-mail:
    'your IMAP server appears to be temporarily out of service'
    Any assistance please? Much appreciated.....

    Call your ISP or whoever hosts your mail server and ask them if something is going on...

  • Last Wednesday my iPhone 4 shut down automatically and it wouldn't let me reboot for about a half an hour. It finally rebooted and then it started with the batterty drainage and no service, going in and out of service. What's wrong?

    Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???

    Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???

  • Is there any way I can find out the service record on this mac ?

    I purchased a used QS from an authorized apple dealer at their after boxing day sales event. This QS is extremely quite compared to my polar express MDD.
    Is there any way I can find out the service record on this mac ?
    Somewhere away back when I heard that by knowing the serial number the details of the service record on the given mac could be found. However in those days I only bought new. These days with mac's inability to run applications that require the for real OS 9 ( not classic ) I have to scour the used market. I have some high end audio midi programmes ( for example emagic, cubase VST score ) that do the job and sometimes better then then the OS X versions.

    Hello,
    You can use System.getProperty("SAPSYSTEMNAME"); in your UDF as specified in this thread.
    Get name of XI System in mapping
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Apr 27, 2011 7:51 AM

  • UCCX 8 VOIP Monitor Subsystem - Out of Service

    All,
    Upgraded CCX 701(SR5) to CCX 8.0.2 Premium HA enabled. Both Servers were IN SERVICE. Did a Patch upgrade to UCCX 8.0.2SU1. Noticed that VOIP Monitor Subsystem on both servers showing as OUT OF SERVICE. Downgraded to CCX 8.0.2, still get this Subsystem OUT OF SERVICE.
    From RTMT, it shows the following error:
    %MIVR-SS_VOIPMON_SRV-3-VOIP_OPERATION_ERROR:VOIP Subsystem Operation Error: Module Name=LRMConnection.readMSG, A specific description for a trace=erroris: ,Exception=java.io.EOFException
    Anyone kows how to fix this problem???
    Thanks.

    Hi all,
    I had this same problem and similar/same versions.
    Restarting Cisco DESKTOP VoIP Monitor Service (on sub - which had VoIP Monitor Service showing 'OOS') made no impact. I don't think there is any real relationship between DESKTOP VoIP monitor service and VoIP monitor service?
    Anyway, restarted the same service on Pub - no change.
    Tried restarting various sub services including CCX Engine - no change.
    I found I had to restart publisher Cisco Unified CCX Engine, then go to sub and do the same once pub was back to all 'in service'.
    I then found that my sub's 'Log Manager' under 'Cisco Unified CCX Serviceability' had gone to PARTIAL SERVICE.
    I restarted 'Cisco Unified CCX Serviceability' on sub - which had to be done via CLI.
    It appeared to restart no issue - but refreshing the list of services in the GUI several times - it still was in PARTIAL.
    Restarted Sub appliance (bounced the server) from CLI, after reboot - all services were back up and IN SERVICE.
    Thankfully I didn't have to restart my Pub - all services... IN SERVICE on pub & sub
    Resolved.
    PS. No calls were dropped for us.

  • Nokia Suite update out of service, could it mean b...

    Anyone else having problems with Nokia suite update facility, it wont refresh just says that it is out of service and try later, could this mean belle is coming????  God i want it, hope its as good as we all expect it to be
    Solved!
    Go to Solution.

    just a little background info from telstra. they have had the update from release. it comes down to the fact that there were so many fixes to anna they didnt think it fair to keep testing it. as for the emergency call that was an issue where when our emergency numbers were called the phone wouldnt call the number and it also caused the phone to freeze, i was told of alot of other issues whithin the update. telstra are now focusing on haveing there updates page update more often and correctly.
    i have not had any proplems while and after updating my n8 to anna. which goes to show that telstra have released a perfect version of anna. oo and new nokia phones are on the way to telstra.. ill let you work out what they are

  • B Channel out of service

    Hi,
    I am getting B Channel OOS in my event viewer for a gateway in CCM.
    Whats the reason for this. How can i rectify this. Can call get disconnected due to this. Please suggest.....
    Help required immediately.

    Hi,
    I am also seeing this issue with CCM 4.1(3)sr1, Windows 2000.2.7sr2. Intermittently there are multiple "Error: BChannelOOS - B channel out of service." (and D channel out of service) errors in Event Viewer for different MGCP gateways (remote and local, 3845 and 3725's). I am going to check the CCM/SDL traces the next time this happens, but if you have any other suggestions or information I would appreciated it.
    Thanks,
    GG

  • Ipad air "out of service for 60 minutes"

    my ipad air sent a message today that it would be out of service for 60 minutes today and it was. Was this legitimate from Apple or some sort of virus or hack?

    Sent a message to whom?
    There are no viruses that affect a device running iOS.
    Barry

  • Output determination (print out) for service entry sheet

    All SAP Gurus,
    What are the steps involved in determining the output (print out) for service entry sheet?
    Regards,

    Hai,
    Goto NACE select the Application ES, out type NEU and maintain the program SAPFM11, Formroutine ENTRY_NEW, form ML_SERVICE_ENTRY aganist medium printout and maintain the condition records for printout to VN.
    take print in ML83
    Regards,
    eswaramanu...
    Edited by: eswar manu on Oct 21, 2008 8:37 AM

  • Expose userid field in the Check in/out web service

    Hello
    I need to integrate the Check in/out web services into a InfoPath Library Form. I have the webservices added and working properly. My progress thus far:
                  -CheckinFile, CheckOutFile, UndoCheckOut data connections are added
                  -Necessary rules are built
                  -Web services appear to work correctly EXCEPT
    1. I receive an error if the form is opened in Browser, but not when opened in InfoPath Filler. This is a problem because most of our users do not have InfoPath installed. So we have a need to open in Browser or dialog.
    2. Once the file is checked back in, the field "Checked Out To" defaults to an application ID.
    So two issues:
    How to open the form in Browser
    How to set the Checked Out To field to the current user.
    From what I have been told, I need to expose the userid element in InfoPath designer.

    Hello,
    I have not tried this yet but you can just follow hilary suggestion to check in/out form when it opens.Make sure your versioning is enabled in library.
    http://www.infopathdev.com/blogs/hilary/archive/2010/11/10/check-that-form-out-or-in-automatically.aspx
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • CSCts69270 - CCX CTI ports may stuck in out-of-service state when UCM Upgrade/Restart

    Symptom:
    CCX CTI ports (RP & IVR) may stuck in out-of-service state during CUCM upgrade or Restart.
    Conditions:
    During CUCM upgrade the The UCCX CTI ports (RoutePoint Triggers and few IVR ports) went into out-of-service state .
    This condition may happen during CUCM upgrade process or CUCM nodes restart. When this happens;
    The CUCM sate of down ports is "Registered".
    The UCCX state of down ports is "Out of Service"
    This was tested on following Release branch;
    CUCM Version: 8.6.2.10000-30
    UCCX Version: 8.5.1.11001-35
    JTAPI Version: 8.6(2.10000)-2
    CUCM is a 15 Nodes cluster over the LAN with 10 subscriber nodes.
    UCCX is a 2 Nodes-HA Cluster, with one Route point, and 300 ICT IVR ports.
    Workaround:
    After Upgrade completes, restart of CTIManager service from the CUCM nodes serving the CCX.
    Last Modified:
    Aug 26,2013
    Symptom:
    CCX CTI ports (RP & IVR) may stuck in out-of-service state during CUCM upgrade or Restart.
    Conditions:
    During CUCM upgrade the The UCCX CTI ports (RoutePoint Triggers and few IVR ports) went into out-of-service state .
    This condition may happen during CUCM upgrade process or CUCM nodes restart. When this happens;
    The CUCM sate of down ports is "Registered".
    The UCCX state of down ports is "Out of Service"
    This was tested on following Release branch;
    CUCM Version: 8.6.2.10000-30
    UCCX Version: 8.5.1.11001-35
    JTAPI Version: 8.6(2.10000)-2
    CUCM is a 15 Nodes cluster over the LAN with 10 subscriber nodes.
    UCCX is a 2 Nodes-HA Cluster, with one Route point, and 300 ICT IVR ports.
    Workaround:
    After Upgrade completes, restart of CTIManager service from the CUCM nodes serving the CCX.
    Last Modified:
    Aug 26,2013
    Known Affected Releases:
    (0)
    Known Fixed Releases:
    (0)

    Hello r.mata, do you have a question about this bug?  Regards, Wes

  • Personal Communicator Phone Out of Service

    Hi
    When i try to make a call from personal Communicator, it shows "outgoing call failure (Phone out of service)".
    I checked all the setting in callmanager and presence.After dialling callmanager reply with SIP: 400 bad request.

    Hi Bvanturn
                   I checked my configurations again and again.No hard phone is associated with that Personal Communicator.When i call to personal Communicator device its successful.But when call from personal Comm to any number its failed.
    In sniffer i got SIP message from Callmanager with this error "400 Bad Request".
    When i associate hardphone with personal Communicator device and deskphone is selected then every outgoing & incoming call successfull.
    Sometime when that personal comm device lregistered for long time it starts every outgoing call successful.But after register again same issue.
    Can you send me any sample configuration for personal Communicator device in Callmager and Presence???
    Thanks
    Regards
    Sajeel

Maybe you are looking for