Bluetooth problem after update last ics .587 mini pro!

sony what happened with your last update?after i update to ics with pc companion when i turn on bluetooth my phone restart boot after xperia logo restart again to sony logo, again and again... please fix that last update.

Thanks for posting and welcome to the forum!Hmm, that's a problem I've never heard of I must admit. Have you tried to run the phone in safe mode to see if it keeps appearing then?You can start it in safe mode by turning the phone off and then press and hold the on/off-key and at the same time continuously tap the menu key (the one to the right below the screen with the for lines). It might take a couple of tries before you succeed with getting the phone into safe mode, so have patience. What do you think about this forum? Let us know by doing this short survey.

Similar Messages

My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

Bluetooth problem after update to lollipop

Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected . PLEASE HEEELP !

Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
- Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

I have a problem in the Bluetooth headset after updating iOS 7

I have a problem in the Bluetooth headset after updating iOS 7

Hi,
have a similar problem here. More specifically, I am using a Plantronics Voyager Legend (brand new) with my Iphone5 (iOS 7.0.2). All apps are working great with the headset, e.g., listening to music, normal phone calls, etc. No sound distortion at all.
When I use Skype (most recent version, which is 4.12.258) the sound is very distorted, like scattered. I also successfully used the same headset with a Samsung Galaxy S3 and Skype. No problems. So, I suspect that it must be the combination of Iphone/iOS7 and Skype which messes up the sound.
Does anybody else have the same problem when using that combination of devices and apps?
Best,
Kurt

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.

Mythbackend problem after update

I am facing the following problem after updating mythtv.
The installed packages are:
sip03ds ~ $ sudo yaourt -Ss mythtv | grep installed
extra/mythmusic 0.21-3 [installed] (mythtv-extras)
extra/mythtv 0.22-3 [installed] (pvr)
extra/mythvideo 0.21-2 [installed] (mythtv-extras)
extra/nuvexport 20090413-1 [installed]
after updating mythtv the backend refuses to start. Even though is displays that it is starting normally:
sip03ds ~ $ sudo /etc/rc.d/mythbackend start
:: Starting MythTV Backend [DONE]
sip03ds ~ $
for some reason it shows that the backend is unavailable.
sip03ds ~ $ mythfrontend
2009-11-21 10:32:59.615 mythfrontend version: tags/release-0-22 [0.22] www.mythtv.org
2009-11-21 10:32:59.668 Using runtime prefix = /usr
2009-11-21 10:32:59.668 Using configuration directory = /home/sip03ds/.mythtv
2009-11-21 10:33:00.548 Empty LocalHostName.
2009-11-21 10:33:00.549 Using localhost value of htpc
2009-11-21 10:33:00.570 New DB connection, total: 1
2009-11-21 10:33:00.587 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.588 Could not open settings file /home/sip03ds/.mythtv/config.xml for writing
2009-11-21 10:33:00.588 Closing DB connection named 'DBManager0'
2009-11-21 10:33:00.631 ScreenSaverX11Private: Gnome screen saver support enabled
2009-11-21 10:33:00.667 DPMS is active.
2009-11-21 10:33:00.710 Primary screen: 0.
2009-11-21 10:33:00.719 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.723 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:00.823 MythUI Image Cache size set to 20971520 bytes
2009-11-21 10:33:00.824 Enabled verbose msgs: important general
2009-11-21 10:33:00.889 Starting mythlcdserver
QWidget: Cannot create a QWidget when no GUI is being used
2009-11-21 10:33:01.408 Connecting to lcd server: localhost:6545 (try 1 of 10)
2009-11-21 10:33:01.911 Connecting to lcd server: localhost:6545 (try 2 of 10)
2009-11-21 10:33:02.412 Connecting to lcd server: localhost:6545 (try 3 of 10)
2009-11-21 10:33:02.913 Connecting to lcd server: localhost:6545 (try 4 of 10)
2009-11-21 10:33:03.414 Connecting to lcd server: localhost:6545 (try 5 of 10)
2009-11-21 10:33:03.915 Connecting to lcd server: localhost:6545 (try 6 of 10)
2009-11-21 10:33:04.416 Connecting to lcd server: localhost:6545 (try 7 of 10)
2009-11-21 10:33:04.917 Connecting to lcd server: localhost:6545 (try 8 of 10)
2009-11-21 10:33:05.417 Connecting to lcd server: localhost:6545 (try 9 of 10)
2009-11-21 10:33:05.918 Connecting to lcd server: localhost:6545 (try 10 of 10)
2009-11-21 10:33:06.471 Primary screen: 0.
2009-11-21 10:33:06.473 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:06.475 Using theme base resolution of 800x600
2009-11-21 10:33:06.500 LIRC, Error: Failed to connect to Unix socket '/var/run/lirc/lircd'
eno: No such file or directory (2)
2009-11-21 10:33:06.500 JoystickMenuThread Error: Joystick disabled - Failed to read /home/sip03ds/.mythtv/joystickmenurc
2009-11-21 10:33:08.531 Using the Qt painter
2009-11-21 10:33:08.535 Removing stale cache dir: /home/sip03ds/.mythtv/themecache/MythCenter-wide.1280.800
2009-11-21 10:33:08.557 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml
2009-11-21 10:33:08.891 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
2009-11-21 10:33:08.897 New DB connection, total: 2
2009-11-21 10:33:08.897 New DB connection, total: 3
2009-11-21 10:33:08.902 New DB connection, total: 4
2009-11-21 10:33:08.906 Current MythTV Schema Version (DBSchemaVer): 1244
2009-11-21 10:33:08.910 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.926 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.927 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:09.589 Desktop video mode: 1280x800 59.9125 Hz
2009-11-21 10:33:10.602 Registering Internal as a media playback plugin.
2009-11-21 10:33:10.958 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythmusic.so: undefined symbol: _ZNK15ComboBoxSetting9classNameEv
2009-11-21 10:33:10.958 Unable to initialize plugin 'mythmusic'.
2009-11-21 10:33:11.230 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythvideo.so: undefined symbol: _ZNK7Setting9classNameEv
2009-11-21 10:33:11.230 Unable to initialize plugin 'mythvideo'.
2009-11-21 10:33:11.248 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
eno: No such file or directory (2)
2009-11-21 10:33:11.259 MMUnix::AddDevice() Error: failed to stat /dev/power,
eno: No such file or directory (2)
2009-11-21 10:33:11.271 Loading window theme from /usr/share/mythtv/themes/MythCenter/menu-ui.xml
2009-11-21 10:33:11.377 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
2009-11-21 10:33:11.381 Found mainmenu.xml for theme 'MythCenter'
Any ideas or logs where to check would be more that appreciated.
Thanks
Last edited by sip03ds (2009-11-21 09:40:36)

I removed all the plugins and reinstalled mythtv. Configured it as advised on the wiki (without dropping the database schema) but the server is still not starting up correctly.
I found out that the server is starting and and stopping when I run:
sudo /etc/rc.d/mythbackend start
when I start the front end, the front end cannot connect to the back end because it is unavailable.
in case I start the server manually:
sudo mythbackend
I am able to connect via mythfrontend and mythtv is working correctly. Any suggestions to change the daemon script ?
Last edited by sip03ds (2009-11-21 22:56:51)

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Cpufrequtils problem after update

Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.

raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file.

Problem after update software 5700xm

I'm facing some problem after updating my 5700xm from v3.27 to v 03.83.1 22-06-07.
1. when opening the music player when the open progress is appear it came out so long untill i have to switch it off and on it again then when i open the music player it goes OK.
2. Refreshing music library, when i try to update/refresh to find new music after recived bluetooth it takes to long to find like 1hr and at the end i have to stop it. Also no new music found i'v done it many times.
3. After all the problem came out, i thought that maybe it will solve if i just try restore the phone to default factory setting, so i back up phone memory to mmc and then press *£7370£, so it restart and appear installing it took long time to install and at the end came out masage "some application are unable to install....." then i try to restore the phone memory, but it like the restore can't function well or maybe don't restore at all b'cos all my application that I install erlyer not fuction, all my contac are lost so do massege....
So do any body got the same prob as i am...????
Can I down grade to the erlyer version????
Any body please help give some oppinion to solve this prob so that i can sleep well....

Hello EveryBody
To update your Nokia 2700, DON'T USE "nokia software update" directly.
You'll have to install NOKIA OVI SUITE, then sign in with your account ou register.
Afterwards update your 2700 via the update option of OVI SUITE.
I just tested it and it works

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

Bluetooth problem after update last ics .587 mini pro!

Similar Messages

Maybe you are looking for