Bluetooth problem in connection

Hi,
I have recently purchased 2 Nokia sets (Model No: X3, C6-00) along with a Nokia bluetooth (model type: BH - 607). The bluethooth does work on my X3 Nokia set for both incoming and outgoing call, but for my another Nokia set - C6-00, it does work only for incoming call, but doesn't work for outgoing call.
Any suggestion and solution to solve out this problem?
Thanks,
Tilak

Hello. I'm not able to receive and send any file via Bluetooth. If someone gets the solution please tell me.

Similar Messages

Bluetooth problem - Cannot Connect to Device that is not copyright protected SCMS-T Method

I have a Qosmio X875-5280 which has a bluetooth adapter. I also have a bluetooth device which is an adapter for a Bose Sounddock such that the device allows the Sounddock to receive the bluetooth audio stream from the laptop -- at least that is how it worked until recently. Diagnostics show that both the bluetooth adapter and the bluetooth device are working. When trying to connect to the device, I now get "connection failed" message or the message "You cannot connect to a device that is not copyright protected by SCMS-T method." It seems the Toshiba bluetooth stack is responsible for this, however, I fail to see why a device which is acting like headphones fails to connect now. I have Windows 7 64 installed. I have uninstalled all of the bluetooth drivers and re-installed them several times. Attached is a pdf file which shows all messages and settings relevant to the issue.
Attachments:
bluetooth messages.pdf ‏158 KB

See the solution I proposed some time ago here.
-Jerry

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you hel

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Facing problem while connecting N70 with bluetooth

I am connecting N70 with my laptop thru bluetooth. But im facing a error msg saying that hardware problem with MODEM.
do i need to install Modem & if so which one suitable.
all others application working thru bluetooth expect net connection.
description:
Window XP
Nokia PC suite letest one
thru blutooth.
plz suggest. Thanks

When one installed pcsuites successfully it installed all drivers including the modem, the reasons why it takes sometimes when one is prompted to connect the cable.
Try to uninstall pcsuite again & run the pcsuites cleaner afterwards then re-install pcsuite. Don't connect the cable until told to so & check. If it does fail again, make a backup & format your phone; is the firmware of your N70 the latest one?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Hello NiiTeye,
I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
iOS: Troubleshooting Bluetooth connections - Apple Support
Sincerely,
- Brenden

My iPhone 4S Bluetooth will not connect with either my iPad1, MacBook Pro or Automobile BT. Suspect a stack issue in new BT 4.0 (BTLE) release. Has any one discovered fix to this. I have tried this with two separate 4S phones and have same problem..

One further clarification. I am most concerned with connecting with BT in automobile. I can use WiFi to tether to my other devices. I cannot change the car very easily! My iPhone 3G had no connection issues.

I'm new. Same bluetooth problem. Will not pair with my 2010 VW GTI w NAV system, or my MacBook Pro 17" (just discovered the MacB prob.)
When I initially discovered the problem I went to an Apple Store. Genius was excellent but requested that I check with VW. VW people were very helpful. A mechanic had an iphone 4s. He came out to the car ... He could not pair my phone but he could pair his phone ... So, it's the iphone ... Back to the Apple Store ... the genius was really good. He replaced the iphone. Great ! So, back out to the car & it would not pair, still. So ... can't be the phone , right. Back to VW. The Audi manager had an iphone 4S. He paired his phone with my car. He could not pair my phone to my car. He tries my phone in a new 2011 GTI sitting on the lot ... my phone pairs with it just fine. So ... it's my car. So ... make an appointment to get the bluetooth module replaced. They replace the Bluetooth module. My iphone will not pair. They end up pairing 2 different iphone 4S to my car ... but not my iphone 4S. My iphone 4S will also not pair with another 2010 GTI they have in for service. Though the 2 iphone 4S
pair with the second GTI just fine. They even try pairing my iphone with a brand new 2012 GTI in the showroom ... yep ... it paired fine. So ... ????????????????
They are going to update my nav software next (tomorrow), Hopeful ??? not really ... Will be taking my computer to Apple Store next ... maybe if they can discover why it will not pair to my MacBook Pro it will lead to a solution for the GTI ??? I'll get back to you.

Problem to connect iPhone 4s (6.0) to a HP Pavilion DV6 laptop via Bluetooth

I'm having problem to connect iPhone 4s (6.0) to a HP Pavilion DV6 laptop via Bluetooth, the plan is to share the Internet (3G) from the iPhone to the laptop.
The driver for serial port is not installing and I don’t have the option to connect to Internet via the iPhone. The problem is isolated to the iPhone as my Samsung mobile installs and connects ok, and is available in the control panel. During install I receive an error that the drivers (I guess for the COM port) cannot be found by WIN7. Drivers and options for headset, sound, SMS etc has installed correctly and is selectable in the control panel for Bluetooth.
For troubleshooting I have reinstalled HP Bluetooth package sp44774.exe, no success. I then goggled and found a another package sp53961.exe, still I have the problem. Windows Update is configured to auto search for updates.
Anyone have an idea what to do next?

Amazing how it can be the simplest things that get overlooked. Glad it is working.

When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
Any ideas - solutions - comments please?

I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

How to Solve Wi-Fi or Bluetooth Problems on your iOS Device?

Do you have any problem with Wi-Fi and Bluetooth on your iOS Device? Please read these steps carefully and follow it!
These Steps that I am sharing are TESTED by 10 iOS users what had problems with Wi-Fi or Bluetooth or both and was successful
- Please note that Resetting/Factory Resetting/Hard Resetting or Recovering or un-jailbreaking your device will not work at all -
To Solve Wi-Fi Problems Follow these steps (But before doing anything please restart your iOS Device and see if you still have network problems):
Step 1 Go to Settings > General > Reset > Rest Network Settings and Reset your Network Settings and wait until your device re-boots
Step 2 Go to Settings > Wi-Fi and see if you can connect to your Wi-Fi If you can't then go to next step
Step 3 Go to Settings > Airplane Mode and turn on Airplane Mode and shut down your device. Go to your network provider and ask to restart the Modem or do it your self (Just unplug power cord and plug it back in) You have to wait 30 seconds.
Step 4 Boot your device and go to Settings > Airplane Mode and this time turn if off and go to Wi-Fi and see if you can connect it again. If you can't then go to next step - Note: If you are going on to Step 5 it means that your device is experiencing Critical System Error that cannot be fixed easily -
Step 5 Go your laptop/desktop and open your browser then type this on the webpage search bar 192.168.0.1 and click enter. If it doesn't work then go and ask your network provider for an address for your modem/internet settings.
Step 6 Change your modem/internet settings to no password and make it "available/visible for everyone" and go to your iOS device and got to Settings > Wi-Fi and see if it works this time. If it still doesn't work go to next step - Note: If you are going on to the next step it means you are experiencing Critical System Error that had been cause by glitch/bug -
Step 7 Connect your iOS Device to iTunes on your laptop/desktop and update your iOS version -Note: this process if basically re-installing your operating system- If you can't update if because the new update if not available you have to wait for next update unfortunately
Step 8 After updating your iOS Device Go to Settings > Wi-Fi and see if it connects to your Wi-Fi. It normally fixes the problem but if it still doesn't, it means your device is experiencing hardware problem. Visit your local Apple Retail Store or reseller and ask them for complimentary/device-exchange/warranty help or go to Apple website for online support: www.apple.com/support/ for better support.
To Solve Bluetooth Problem all you need to do is resetting (not factory resetting) your device and see if it works, if it doesn't you will need to update your iOS or Google for more technical troubleshooting because it could be your pairing device's problem. Visit www.apple.com/support/ for better support.
If anyone of you had these experiences and was successful troubleshooting please do share your experience. I will also be avaliable to answer your questions if you have one! Please do share your openions about my post if you have one

If you don't mind, would you do that for me please?

Stereo Bluetooth problem on MacBook Pro 13" 2.26GHZ

I finally received my Jabra BT620s Stereo bluetooth headset. Connecting to the MacBook no problem. button controls work like a charm but the sound is terrible.
It has a high pitch static through all the sounds from different players (iTunes, VLC)
But there no problem with the sound when I connect it to on my HTC Dream, HTC Universal and asus EEEPC 1000.
What can be the problem?
What can I do to solve this problem?
Thanks in advanced
Tjikko

Hi there,
You may find the troubleshooting steps found in the article below helpful.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
-Griff W.

Bluetooth problems all around - Modem in the first row.

Hi there,
I've got a really annoying problem with the Bluetooth Setup of my Mac. Like you can see in my system description, I use Mac OS X 10.5.6. For a long time I used my old mobile via Bluetooth and GPRS as a Modem. Now it was time for a change. I bought a new mobile which supports 3G (Nokia 5800 Xpress Music).
I used the Bluetooth Wizard and told him to use all possible bluetooth functions of my device. I looked in the internet for the right configuration (APN, CID,...) and choosed to use the Nokia GPRS/3G Modem script which is preinstalled in Mac OS X (I also tried another one from www.taniwha.org.uk, it didn't work either).
The very strange thing is, the first connection worked without any problem, but after disconnecting and reconnecting it didn't work anymore. Instead I've got a message that the RFCOMM-Channel can't be opened.
I tried to fix the problem myself by searching wrong settings in some plists, but although I restored the original settings after recognizing that my changes didn't work, I've got a new problem.
Now the status symbol of the bluetooth modem always shows up that no modem configuration could be found, although I can still try to connect via Network -> Bluetooth. Of course it doesn't work this way too.
Sometimes the bluetooth modem works once after a reboot ( not after every reboot ). But only once!
File Transfer always works! The Nokia Multimedia Transfer also always works.
I definitely need advice of some of you, experts.
I'd love to hear from you!

Hi,
sorry, but the problem isn't solved yet. I tried different things but nothing helped:
I backuped and deleted the following Files:
/Library/Preferences/SystemConfiguration/Preferences.plist
/Library/Preferences/com.apple.Bluetooth.plist
/Users/benutzername/Library/Preferences/ByHost/com.apple.BluetoothHASH.plist
But it didn't help. In fact it made things worse. Therefore I restored the backuped files.
I deleted all bluetooth devices and installed just my new phone a bunch of times. - No change at all.
I used FSEventer to control the Filesystem Access. That leaded me only to the files mentioned above.
In the log-file:
/private/var/log/ppp.log
is the following error message logged:
Failed to open /dev/cu.Bluetooth-Modem: Resource busy
Up until now, I don't understand why this resource is busy.
I figured out, that the modem works using a USB-connection. That isn't a satisfying solution but it works for now.
Nevertheless I am still really interested in resolving the Bluetooth problem.

I have problems to connect my iphone 6 with IOS 8.0.2 to my citroen c5.

My iphone 6 has problems to connect to my citron c5 via bluetooth. After several attempts I was able to pair the phone to the car but neither are the contacts from the phone accessible by the car nor is can I successfully create calls using the car.

I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out.

Bluetooth problem Yosemite

I bought a new iMac 21,5 with wireless keyboard and the Magic Mouse.
I've been using it for about two weeks now and everything was working fine, until i installed the new OSX Yosemite when it released.
Now, about 10x an hour the computer loses the bluetooth connection with the keyboard.
This is very annoying, since i use it for 3D drawing, and everytime it loses connection, i have to fill in the numbers again.
I've read on the internet that a lot of people share these problems.
Is Apple coming with a solution or update? Or can i fix this myself?
Read something about resetting RAM etc as well. But since my computer is new, I dont think that'll do it.
Thank you very much.

I had the bluetooth problem where my MacBook Pro wouldn't reconnect to my external bluetooth keyboard after the initial connect when I upgraded to Yosemite. I found the solution in another thread from nashntk: "everything were solved by resetting SMC Intel-based Macs: Resetting the System Management Controller (SMC)."
So far, the SMC reset fixed all of my bluetooth issues after the Yosemite upgrade. And it seems to be an ongoing solution as one reset has allowed me to disconnect and reconnect again multiple times.

Airport & Bluetooth problems after 10.4.7 update

(Note: I posted this in the Tiger forums and after no response, thought I'd try here.)
Greetings,
After updating to 10.4.7, my iMac G5 20" iSight exhibits occasional loss of signal strength in the Airport and poor or lost Bluetooth connections with the wireless keyboard and mouse.
The Airport and Bluetooth problems happen together at the same time. I can see the Airport signal strength drop and seconds later the mouse starts becoming slow and I usually lose connectivity with my keyboard. After about 10 minutes, signal strength returns on both.
The system is well isolated from interference, the cordless phone is a 5 ghz unit, and all cellphones have been removed from the room, but the symptoms continue. The wireless G router is only 3 meters away in the same room.
I reapplied the combo 10.4.7 updater, repaired permissions, cleaned caches using Applejack, zapped the PRAM and reset the SMU but the problem still happens.
Any suggestions? It is driving me crazy.
Thanks in advance for any help.

I'll add a "here, here". I have a 20" iMac G5 (1.8 GHZ). Since applying 10.4.7 I have had Bluetooth disappear twice. Disappear as in: keyboard and mouse no longer function and the bluetooth icon in the menu bar disappears. Power cycle works to recover the system. A far from elegant workaround.

N95 Bluetooth Problem

Merry Xmas
I am unable to connect to PC Suite using bluetooth. I bought a Laser bluetooth dongle and am using Vista Home Premium.
I install the drivers from the cd and am able to pair and browse the phone through the dongle software but I cannot connect using pc Suite.
I have updated the phones firmware and aslo the software.
Any help is appreciated

27-Dec-2007 08:31 PM
manta wrote:
uninstall the bluesoleil and use Vista's own Bluetooth software to connect to the Buetooth dongle you have. Then open pc suite and run through the gt connected wizard of pc suite to pair suite and phone
Well I had a few problems finding a driver for vista , but after some searching I found it.
It now works like a charm.
Thank you very much for your help, its very much appreciated
Graeme

Bluetooth problem in connection

Similar Messages

Maybe you are looking for