Bluetooth problem: Visor mount Bluetooth

I have this blackberry visor mount Bluetooth car fm transmitter. Works fine with the iPhone and my Blackberry but when attempting to use the fm transmit the iPad does not seem to connect properly. Unsure why maybe os4 ?

The following are the bluetooth profiles supported by the different iDevices. There are differences between the phone and iPad.
http://support.apple.com/kb/HT3647

Similar Messages

Mac pro 2009 bluetooth problems

Hey guys. gals... so... if you followed y previous saga of the quad core, you know it just got replaced by a eight from mac fro various maladies and problems. Yay me. Except..... the bluetooth f'n ***** on this thing....
It took an incredibly long time for it to pair with the keyboard... then the ghost pop up says "connection lost" like every 4 minutes if you aren't typing on it. which if you run photoshop day and night like never happens. So..... yeah. Mouse practically doesn't work either works half the time or super slow or like not at all.....
So....whats going on? I tried to plug in my old bluetooth adaptor from the quad core (which had an airport card that also died) and it tried to set up some sort of pan network, then the almost working bluetooth died, so I couldn't click around..
oh.. and I restored my entire system from time machine if that matters...?
Questions... if this is the fatal flaw in the mac pro line.. thats bad. So.....how do i
-turn off onboard bluetooth
-engage usb mounted bluetooth.
Thanks
m

I'm having similar problems with a brand-new Mac Pro 8-core. Mouse cuts out (I'm using a wired keyboard thankfully) and my Jawbone headset will work wonderfully with my old MacBook Pro but will only pair (maybe) on my Mac Pro.
Called and spoke with an expert and feel I get the run around. He had me shut down and unplug everything for 30 seconds. I did it but felt he was just having me "do something" to get me off of the line.
Apple has a problem with Bluetooth on their Mac Pros and isn't dealing with it.

Walk problem - Bluetooth problem

I'm using Maps 3.09 on Nokia N8 Belle, equally for Drive and Walk.
It's very annoying that Walk doesn't have it's own button like Drive, and that Walk isn't build the same way as Drive (i.e. the same menu-buttons. As an example, I can't find a way to just "Walk home". I really don't understand why those two (Walk and Drive) aren't designed the same way, just differing in those specific things when used in walk or drive mode.
Further there is a huge Bluetooth-problem. When Bluetooth is configured on the device, Maps asks which Paired Device to use, with the possibililty to cancel. But as a result, independent of the choice, Bluetooth is always (automatically turned) on, unneeded battery drain as a result, and it's impossible to use Maps without having Bluetooth on.

Hi, thanks for the reply.
Unfortunatly the news is bad, very bad !
It would mean I could no longer be able to use my N8 in my car in combination with my Nokia Bluetooth GPS receiver.
It's not because Symbian OS is EOL for Nokia (despite they recently releases the pureview), that features should be removed. IMHO Symbian OS should never been abandoned, and many with me will NEVER go for a Windows-based smartphone. I hope Nokia is aware of that and take it into consideration.
Back to Maps, I understand the Bluetooth-problem I mentionned will never been solved, and that I should be very carefull when new versions (of Maps or Belle) are announced, as Bluetooth might no longer be useable at all in Maps.
To be honest .... all this is beyond my intellectual capacity to follow the reasoning behind the decisions. But yeah, we know there is a M$-guy responsible now at Nokia, that explains everything. When Symbian will de totally death, he'll get a big promotion at M$

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you hel

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

I have got a strange bluetooth problem: Sometimes it's 4.0 LE, sometimes not

Sorry for my bad english, I will try my best.
In our house there are my MacBook Pro Mid 2012 and an iMac early 2008. Both with the actual OS X. There are no problems with the iMac.
I have got problems with bluetooth since updating to yosemite on the MacBook, just like other people here. Nothing helped, no resetting, no deleting any DUN or PAN. I am using now may old usb-keyboard and a trackball mouse with usb cable. The other devices (external bluetooth keyboard from apple and the apple external trackpad) won't connect safely and constantly via bluetooth. The external bluetooth speakers had the same problem. Just every bluetooth thing, iphone 6 plus too.
I am looking for solutions, but nothing helped me. So I resigned.
Two days ago I wanted to install the app "near lock" on my iphone. This will unlock the MacBook pro, when I come near it. For this I had to install an app on the mac too, but the app said, that my Macbook aren't have Bluetooth LE - so the app won't installed.
After 24h later I've tried it again (don't know why...hmmm), and on that day I was able to install it. Everything fine. Suddenly the Macbook had Bluetooth LE.
Yeah strange enough. Today it happened again. I made two screenshots, from the same MacBook. Only minutes between the shots.
No Bluetooth LE.
Surprise.
I am no technical Pro, so I do not understand this.
There is a point to state: At the time of the first screenshot my macbook was closed and stood in the twelve book stand with an external monitor. The second screenshot was taken with an open MacBook using the internal keyboard.
Does this make any sense?
I would be happy for some help.
Thanks
Thomas

Couple of days ago, this also happened to me, I'm using MacID though. (attached is the dropdown menu for bluetooth on my mac). I'm using a MacBook as well, so obviously the chip is available, I visit to booting in safe mode and restarting solved the problem, hasn't happened again...yet. And, no, bluetooth is supposed to work in clamshell mode. Just so you(and everyone else) know, you're not the only one.

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

How to Solve Wi-Fi or Bluetooth Problems on your iOS Device?

Do you have any problem with Wi-Fi and Bluetooth on your iOS Device? Please read these steps carefully and follow it!
These Steps that I am sharing are TESTED by 10 iOS users what had problems with Wi-Fi or Bluetooth or both and was successful
- Please note that Resetting/Factory Resetting/Hard Resetting or Recovering or un-jailbreaking your device will not work at all -
To Solve Wi-Fi Problems Follow these steps (But before doing anything please restart your iOS Device and see if you still have network problems):
Step 1 Go to Settings > General > Reset > Rest Network Settings and Reset your Network Settings and wait until your device re-boots
Step 2 Go to Settings > Wi-Fi and see if you can connect to your Wi-Fi If you can't then go to next step
Step 3 Go to Settings > Airplane Mode and turn on Airplane Mode and shut down your device. Go to your network provider and ask to restart the Modem or do it your self (Just unplug power cord and plug it back in) You have to wait 30 seconds.
Step 4 Boot your device and go to Settings > Airplane Mode and this time turn if off and go to Wi-Fi and see if you can connect it again. If you can't then go to next step - Note: If you are going on to Step 5 it means that your device is experiencing Critical System Error that cannot be fixed easily -
Step 5 Go your laptop/desktop and open your browser then type this on the webpage search bar 192.168.0.1 and click enter. If it doesn't work then go and ask your network provider for an address for your modem/internet settings.
Step 6 Change your modem/internet settings to no password and make it "available/visible for everyone" and go to your iOS device and got to Settings > Wi-Fi and see if it works this time. If it still doesn't work go to next step - Note: If you are going on to the next step it means you are experiencing Critical System Error that had been cause by glitch/bug -
Step 7 Connect your iOS Device to iTunes on your laptop/desktop and update your iOS version -Note: this process if basically re-installing your operating system- If you can't update if because the new update if not available you have to wait for next update unfortunately
Step 8 After updating your iOS Device Go to Settings > Wi-Fi and see if it connects to your Wi-Fi. It normally fixes the problem but if it still doesn't, it means your device is experiencing hardware problem. Visit your local Apple Retail Store or reseller and ask them for complimentary/device-exchange/warranty help or go to Apple website for online support: www.apple.com/support/ for better support.
To Solve Bluetooth Problem all you need to do is resetting (not factory resetting) your device and see if it works, if it doesn't you will need to update your iOS or Google for more technical troubleshooting because it could be your pairing device's problem. Visit www.apple.com/support/ for better support.
If anyone of you had these experiences and was successful troubleshooting please do share your experience. I will also be avaliable to answer your questions if you have one! Please do share your openions about my post if you have one

If you don't mind, would you do that for me please?

Bluetooth problem with MBP after installing 10.6.8

hi there,
my one is a mbp mid 2010 model. i've bought it on this february and it was running like a charm. but from yesterday, the bluetooth stopped working. there is a thunder sign over the bluetooth icon and if i click on it, it says "bluetooth: not available".
i upgraded to 10.6.8 at 2/3 days ago, but after that upgrade i didn't check the bluetooth status, so i'm not sure if this problem is from the update or just a coincidence of having a hardware problem after getting the update.
i've spent 2 whole days looking for a solution of this problem and hav tried every possible solution provided on forums. i've tried restarting several times, resetting pram and smc, verifying and reparing disc permission etc........ but none of them works.
i hav a windows partition through bootcamp. i've reinstalled the windows today and there also, i cant find anything about bluetooth. i think, that is a clue for having a hardware issue. again, i've done apple hardware check (both of the short and the extended one) with both of the mac installation disk and the application disk, and none of them has shown any error. shouldn't it detect a hardware problem?
the bluetooth doesn't work also from the safe mood. in 'about this mac', at the place of bluetooth, it doesn't show any connected device.
i'm really confused here. i did not have this problem on 10.6.7. pls help me with it, as bluetooth is very essential for me, mostly for connecting on the internet.
any help will be appriciated.

Just back everything up... pop the dvd in; erase the partition in disk utility and create a fresh install of Snow Leopard.... If it's not hardware related everything should work... Sometimes it's not the update itself but applications of various and diverse users that can cause the problems... It would be impossible for apple to know about all the various combinations of software that can cause these problems.... When in doubt... I back my stuff up and install a fresh copy... (ERASE THE PARTITION) not just install over mac osx again. But have you tried installing over your copy of osx yet? Its not like windows... you don't lose anything when you install OSX again... You only lose your data if you erase the partition!!

Bluetooth problems in Quad 10.4.2

Has anyone encountered a problem where a bluetooth mouse (or any mouse why bluetooth is turned on) cursor will disappear in graphics apps such as Photoshop?
At startup the Bluetooth software says that it has lost information for the Bluetooth mouse I am using, however the mouse continues to work normally in internet apps and the desktop. In graphic apps such as Photoshop, it will not work. In PS (and others) the mouse cursor disappears, and sometime not track.
I have checked the batteries, and tried the mouse on my powerbook G4 without any problems. This behavior will continue no matter what mouse I use (including a wired mighty mouse) until I turn off the built-in bluetooth (wired devices only, bluetooth devices are off)
It seems to me that it is only related to the bluetooth software or hardware, but maybe the OS version?

menamo wrote:
Hi,
i bought a 2 years ago a refurb mac mini with osx 10.4.2 already installed.
after some problems it had i decided to reinstall the system with the cd that was delivered with the mac.
I remember reading a post not too long ago that the person receive the wrong CD on a refurbished machine. I believe the machine was a Mac Mini. I can't find the post now.
The person took the machine to an Apple Store and they reinstalled the OS on it.
Robert

Bluetooth problems all around - Modem in the first row.

Hi there,
I've got a really annoying problem with the Bluetooth Setup of my Mac. Like you can see in my system description, I use Mac OS X 10.5.6. For a long time I used my old mobile via Bluetooth and GPRS as a Modem. Now it was time for a change. I bought a new mobile which supports 3G (Nokia 5800 Xpress Music).
I used the Bluetooth Wizard and told him to use all possible bluetooth functions of my device. I looked in the internet for the right configuration (APN, CID,...) and choosed to use the Nokia GPRS/3G Modem script which is preinstalled in Mac OS X (I also tried another one from www.taniwha.org.uk, it didn't work either).
The very strange thing is, the first connection worked without any problem, but after disconnecting and reconnecting it didn't work anymore. Instead I've got a message that the RFCOMM-Channel can't be opened.
I tried to fix the problem myself by searching wrong settings in some plists, but although I restored the original settings after recognizing that my changes didn't work, I've got a new problem.
Now the status symbol of the bluetooth modem always shows up that no modem configuration could be found, although I can still try to connect via Network -> Bluetooth. Of course it doesn't work this way too.
Sometimes the bluetooth modem works once after a reboot ( not after every reboot ). But only once!
File Transfer always works! The Nokia Multimedia Transfer also always works.
I definitely need advice of some of you, experts.
I'd love to hear from you!

Hi,
sorry, but the problem isn't solved yet. I tried different things but nothing helped:
I backuped and deleted the following Files:
/Library/Preferences/SystemConfiguration/Preferences.plist
/Library/Preferences/com.apple.Bluetooth.plist
/Users/benutzername/Library/Preferences/ByHost/com.apple.BluetoothHASH.plist
But it didn't help. In fact it made things worse. Therefore I restored the backuped files.
I deleted all bluetooth devices and installed just my new phone a bunch of times. - No change at all.
I used FSEventer to control the Filesystem Access. That leaded me only to the files mentioned above.
In the log-file:
/private/var/log/ppp.log
is the following error message logged:
Failed to open /dev/cu.Bluetooth-Modem: Resource busy
Up until now, I don't understand why this resource is busy.
I figured out, that the modem works using a USB-connection. That isn't a satisfying solution but it works for now.
Nevertheless I am still really interested in resolving the Bluetooth problem.

Problem with my Bluetooth resulting in auto rebooting.

I am having a problem with my bluetooth ever since I bought XPERIA mini st15i. The first time it occured, I took it to the customer care, they solved the problem. The problem did occur again after 2 weeks. So, I again took it to Service. They resolved it again. This problem has occured about 8 times. Ever since I tranfer some files through bluetooth from gallery or file explorer, the phone restatrs again and again. It shows the Xperia logo and then agin, it auto reboots until the battery dies off. I updated the phone yesterday and the problem is occuring today again. My warranty period is over, so what can I do? In the warranty period, they changed my hardware but still the problem persists.
I think it's some kind of bluetooth bug. Can it be fixed?

download Sony Update Service and try this app http://www.sonymobile.com/ru/tools/update-service/ . Its helped me

Iphone 5 call with bluetooth (problem)

Hi
since I update the IOS for the IOS 8.0 I have a problem using the bluetooth in my car (Mazda 6 2008). The iPhone connects to the car bluetooth system and works fine, the only problem is when I make a call, I don't hear the ringing sound, only start to listen when the person answers the call. If the person dont answer the call I dont even know if Im making a call or not because there is no ringing sound.
I think that this Is a problem with the IOS, it appears tha the iPhone only uses the bluetooth when the call is answer and not when I start to call.
In the previous versions of IOS everything works fine. I've tried to restore the last backup, hard reset, reset the network configurations, remove and pair the iPhone with the car again, but nothing works.
Anyone with the same issue?
Thanks

Hi rebecchina and M100 users.
I am very happy with my M100 Plantronics due to the aural information on battery life, connected etc. I was disapointed that it didn't work for my new iPhone 5, untill I was offered to trade off with another brand but I was unsatisfied with the other bluetooth that did not have any information service. So I tried sereral was untill I got fed up with it and I held the outboard butten on the M100 for 10 seconds or so - then it connected! And it just works perfectly now
Mike from Denmark

Problem while installing bluetooth driver

I am using windows 7 ultimate OS in my dell Inspiron N5110. There is no Bluetooth icon in my control panel and because of that I cannot connect my Bluetooth devices to my laptop. While I was downloading Bluetooth driver from an external source a windows
popped out which says that Bluetooth adapter cannot be detected in your system. Is there any problem with my Bluetooth adapter hardware? Can anyone suggest me a way to get rid of this problem? Thanking you in advance.

try uninstalling all the drivers you just installed for your printer and plug in your printer and run software update from the  on the upper left of the screen. if there are no drivers available for that, you might have to wait as suggested by your local apple tech.
EDIT:
try this
http://support.apple.com/kb/DL905

Bluetooth problem Yosemite

I bought a new iMac 21,5 with wireless keyboard and the Magic Mouse.
I've been using it for about two weeks now and everything was working fine, until i installed the new OSX Yosemite when it released.
Now, about 10x an hour the computer loses the bluetooth connection with the keyboard.
This is very annoying, since i use it for 3D drawing, and everytime it loses connection, i have to fill in the numbers again.
I've read on the internet that a lot of people share these problems.
Is Apple coming with a solution or update? Or can i fix this myself?
Read something about resetting RAM etc as well. But since my computer is new, I dont think that'll do it.
Thank you very much.

I had the bluetooth problem where my MacBook Pro wouldn't reconnect to my external bluetooth keyboard after the initial connect when I upgraded to Yosemite. I found the solution in another thread from nashntk: "everything were solved by resetting SMC Intel-based Macs: Resetting the System Management Controller (SMC)."
So far, the SMC reset fixed all of my bluetooth issues after the Yosemite upgrade. And it seems to be an ongoing solution as one reset has allowed me to disconnect and reconnect again multiple times.

Airport & Bluetooth problems after 10.4.7 update

(Note: I posted this in the Tiger forums and after no response, thought I'd try here.)
Greetings,
After updating to 10.4.7, my iMac G5 20" iSight exhibits occasional loss of signal strength in the Airport and poor or lost Bluetooth connections with the wireless keyboard and mouse.
The Airport and Bluetooth problems happen together at the same time. I can see the Airport signal strength drop and seconds later the mouse starts becoming slow and I usually lose connectivity with my keyboard. After about 10 minutes, signal strength returns on both.
The system is well isolated from interference, the cordless phone is a 5 ghz unit, and all cellphones have been removed from the room, but the symptoms continue. The wireless G router is only 3 meters away in the same room.
I reapplied the combo 10.4.7 updater, repaired permissions, cleaned caches using Applejack, zapped the PRAM and reset the SMU but the problem still happens.
Any suggestions? It is driving me crazy.
Thanks in advance for any help.

I'll add a "here, here". I have a 20" iMac G5 (1.8 GHZ). Since applying 10.4.7 I have had Bluetooth disappear twice. Disappear as in: keyboard and mouse no longer function and the bluetooth icon in the menu bar disappears. Power cycle works to recover the system. A far from elegant workaround.

Bluetooth problem: Visor mount Bluetooth

Similar Messages

Maybe you are looking for