Bluetooth problem with HP notebook PC G62-460SX on windows 8

Hi
I've upgrade my laptob to windows 8 but the bluetooth didn't work  , I downloaded the driver from you site but its still no working
should I download the Relain/Motorola or the broadcom one
please help me

I understand the bluetooth featured stopped working after it was upgraded to Windows 8.
I will note that this system has not been tested or certified for Windows 8 by HP.  Some functions will not work properly or not at all. 
With that being said, what is the nature of it not working?  Is it seeing devices, but not pairing?  Is it pairing, but not transferring files?  Do you get any error messages? 
Since this system doesn't have any Windows 8 drivers, you will need to install Windows 7 drivers in compatibility mode for the greatest chance of success.  This thread covers how to do this.  Drivers for your unit can be found here. 
Your system could have either the Broadcom or the Ralink/Motorola adapter.  You can use device manager (Windows Key + X>Device Manager) to see what card is listed in the bluetooth category if there is one.  If it isn't detected properly, it may be listed as an unknown or other device.  If there is an unknown or other device in device manager, open it and navigate to the details tab to view the hardware ID (change the property to Hardware IDs).  The hardware ID can help identify what device it is and what driver it may need. 
Otherwise, it will be a process of trial and error with both drivers to determine which one you need. 
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • I have problem with my Notebook fan. it don't work. what can i do ?

    hi.
    my name is maziyar.
    i have problem with my notebook fan
    it does not work. and it got hot.
    what can i do ?
    i don't know why.
    can you help me ?
    there is any where in IStanbul (Turkey) that i can show my Notebook.
    thanks
    maziyar kosarifar

    Hi,
    I would recommend not using your notebook if the system fan has failed to avoid further damage to other components.
    To contact HP, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to fix the Bluetooth problems with the Treo

    It’s pretty obvious by now that Palm had not intentions of addressing the Bluetooth problems with the Treo smart phones. As for me, I need to reset my Treo 700wx several times a day to keep the bluetooth connection working. At my house it simply does not work because I live in a rural area where my cell signal drops out continuously, only for a moment but that’s all it takes for the Treo loose the Bluetooth connection.
     I’ve searched here on this board for a solution only to find out that I’m not the only one with this problem. I’ve searched the Internet and could not believe the endless complaints about this problem, not a single fix was to be found. I will be going to every single site I can find on the Internet where I can leave a review of this product and I would encourage others with the same problem to do the same.
    Post relates to: Treo 700wx (Verizon)
    Post relates to: Treo 700wx (Verizon)

    The "Mobile Device" you see only shows what is on your Treo when ActiveSync is running and connected.  When it's not connected, there is "nothing".  This is good when you want to copy a file you have saved in RAM (main memory).  Connect your Treo and have Activesync run (successfully, of course).  Then, you will see all the accessible files on your Treo.
    Please read the previous reply (I have added and edited it to respond to some of your questions).  Also, since I have the Card Export 3.14 for the WM5 and 6 running and it works on my Treo 750, I believe it should also work for you.  I have WM 6.  Earlier versions of Card Export actually "broke" Activesync for me.  It wasn't until very recently that I wanted to try it again, in hopes that they have fixed the bugs.  Apparently they have and I now use it to "fix" Activesync when it doesn't want to connect.
    So, the latest version is 3.14 and it supports WM 5 and 6 (although they incorrectly named it Windows Mobile 2005/2006). 
    Post relates to: Treo 650 (Rogers)

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

    Hello all,
    I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
    I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
    Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
    Now i tried to deinstall it and again go for 11g. But even the same story here..
    Can anybody give me a solution for this..
    -Regards
    Rajesh Menon

    Saqib Alam wrote:
    i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
    ur problem is that u install latest version and now u trying to installing old version.
    now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
    install fresh windows 7.
    Regards
    SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
    There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
    Stop all Oracle services
    In the registery:
    - Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
    - Delete the entire Oralce folder from HKLM\Software
    reboot
    Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
    reboot

  • Problem with line items print in Script MAIN window.

    Dear Friends,
    I am facing a problem with display the line items in main window.
    Here i have created my form with 2 pages,
    in first page i have created header window(my header information is full length of page), in second page i have created 2 windows, one for MAIN window and second for FOOTER window,
    i am having the Footer information about to off the page.
    and in my main window total 3 line items are coming, if i am having 3 line items then it is displaying properly (first 3 line items then immediately footer information on same page) but if am having more then 3 line items say four, then in my second page first it is printing 3 line items then it is switching into another page. After that footer is coming but. in previous page after printing 3 line items the remaining page is empty..
    my client want me to remove that place also. he wants to display continue..
    i think so u people r understand what is my problem...pls advice me what i want to do to solve this problem.
    Thanks
    Sridhar.

    Hi Sridher,
    If you want to display the footer information only on the last page why dont you use a table to display your details and place the footer details in the table footer instead of a seperate footer window.
    Regards,
    Vidya.

  • 9860 Bluetooth problems with car hands-free

    I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
    If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
    Any ideas, please?
    Thanks!
    Solved!
    Go to Solution.

    Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
    Dave

  • Bluetooth Problem with my N79

    Dear All,
    My Nokia N79 is 2 months old now.  Since the last two days i have been facing a weird problem with it.
    even with my Bluetooth turned on and phone visibility set to Shown to all, My N79 does not get detected by either my PC nor by any other Nokia or Sony Ericsson cellphone.
    even when i try to  connect to the paired devices i had setup, i get an "unable to connect" error.
    Last successful file transfer was done on satrdy, 21st Feb, but since 24th i am facing this problem.
    Is there any solution to this....
    Is it a Firmware BUG or a Device component Failure...???
    Please advice me on the same.
    Tanks & Regards,
    Cloyd

    Other reset is the hard reset.
    Try the "3 finger deep reset" which is depress these three keys simultaneously "*" "3" "green phone" and then power on phone whilst keeping those same three keys depressed until you hear start-up tone.
    This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM. I presume you already have a backup.
    If this doesn't do it then problem is probably hardware and the only option then is to head for the Nokia Care Point.. 
    You can find your nearest Nokia Care POint at:
    For UK
    http://www.nokia.co.uk/A4228006
    For Europe:
    http://europe.nokia.com/A4388379
    For Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair. 

  • IOS 5.1 bluetooth problem with LG HBS-700

    After upgrading to iOS 5.1, my LG HBS-700 bluetooth headset still plays music from my iPhone, but the music controls no longer work (play/pause, next/last track).  The phone functionality (start/answer call) still works.  Is anyone else having these sorts of problems?  I 'forgot' the device and re-connected it, but that did not correct the problem.  I suspect its in one of the sub-functions of bluetooth signalling, but I'm not familiar enough with the standard to correctly designate it (I suspect someone in Apple knows it off the top of their head ._. )
    Thank you.

    Oddly enough I didn't have any problems with the HBS-700 on my iPhone 4 running IOS 6. However I got an iPhone 5 recently and noticed today the exact same thing you describe. Call and volume controls work fine, but I have no control at all of any music playing. This totally *****, but I have no idea if its a problem that Apple needs to correct or a problem with the LG which would mean it can't be fixed. Totally frustrated.

  • Problem with my notebook

    Hi all!
    I have a problem with my hp mini 311 notebook. When I leave it somewhere, for 3-4 hours, its just get frost. I mean I can't do nothing with it then when I want to use it again. Also when I leave it turned on for the night, in the morning it just doesnt do nothing, I can only switch it off and on then.
    Any 1 got some same problem?

    Hi,
    You need to check in control panel -- Power options and check the settings in that. See what settings you have for standby mode and sleep mode. Change those settings and see if the freezing issue stops.
    Regards

  • 1.1.3 Update & Bluetooth Problems with Nuvi 680

    I have been using my iPhone with a Garmin nuvi 680. The nuvi 680 has Bluetooth and can be used as a hands free speaker/mike. I had been using it happily until I upgraded to the 1.1.3 update last night. Now even tough I get an initial connection, it is dropped within a minute or so. Apparently, the connection is reestablished at some point, because after a few minutes the dialog screen warning comes up again telling me that the phone was dropped. This goes on ad infinitum until I unpair the iPhone or turn off Bluetooth. I have tried unpairing and pairing again with the nuvi. It didn't have any effect. I am going to reset the iPhone and try again, but I am not sure that will help.
    The most irritating thing about this problem is that the dialog that keeps coming up, has to be dismissed manually before you go back to navigation. After dismissing the dialog 5 or 6 times, I just turn off Bluetooth in frustration.
    Has anyone else experienced similar problems? How did you fix the issue?

    I am experiencing the same thing. Very frustrating. I got rid of my Motorola Q about 1 week ago and the bluetooth with that phone did the same disconnect cycle (except it also crashed the phone a lot). I have been in heaven with my new iPhone especially with the bluetooth working with my Nuvi 680....for about a week. Now with 1.1.3 I'm back to angry. I would actually seriously consider going back to 1.1.2. I need bluetooth to work with my GPS more than I need homescreen icons or maps triangulation (that's what my gps is for). I'm new to Apple cycle with this type of issue, but I hope that I'm pleasantly surprised to find a quickly rolled out fix.

  • Bluetooth Problems With iPhone 6

    With the latest iOS on iPhone 6 is there still problems with Bluetooth connectivity? I have a FitBit, a Plantronics Marque 2, and a Casio STB-1000 watch that will not stay constantly connected. Since the later two were new, I was blaming them until I started having problems with the Fitbit which I never had problems on my iPhone 5 and seeing others having problems. Come on Apple, with all the people having problems we need a fix.

    Hi stevenfrommarion,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like there is trouble with bluetooth connectivity. I would recommend that you read this article, it may be able to help the issue.
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Cheers,
    Mario

  • Bluetooth problems with iphone 5 running IOS 8.1

    I have a problem with my iPhone.
    Every time im truing to connect to my mac air (MacBook Air (13", medio 2013) its will connect to my 3G network and it will not let me use the feautures of OS X Yosemite, and when i turn of 3G there comes a pop-up message saying "Could not connect to device"
    Please help me
    Thanks in advanced

    Hi ashnupluto,
    If you are having an issue with not being able to establish a Bluetooth connection between your iPhone and your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Bluetooth connections
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Z10 Bluetooth problem with handsfree since update to 10.1.0.273

    Hello,
    since the update to 10.1.0.273 my bluetooth connection with handsfree in my car doesn't work properly anymore.
    A new pairing with the handsfree was also unsuccessful.
    With Software 10.0.10.90 all functions works correct.
    Then I tried to connect to my notebook and my nokia lumia first time.
    Pairing initially was OK, but then the error message "Es ist kein Netz zur Verbindung verfügbar. Sie können Dateien mit diesem Gerät über andere Anwendungen freigeben."!
    What does this mean???
    Can anybody help me?
    Solved!
    Go to Solution.

    Some feedback from blackberry would be good. I don't want to have to change to an iPhone if possible

  • Bluetooth problems with Xperia C4 - Android Wear - Motorola 360

    Hello, I have a serious problem with my new Sony Xperia C4 Dual phone
    I'm always losing the connection with my Motorola 360 smartwatch.The first time I start everything, I can pair my phone with my watch.
    Everything is working fine (watchfaces, apps, notifications, etc).
    But randomly (can be 1 hour or can be 1 day, when the phone is too far from the watch, after a phone restart, or ...) the Bluetooth connection is lost and will never come back.
    If I could restart the connection that would not be that serious but... I can't!
    Android Wear will then start hanging on "Connecting" state and it will not reconnnect until I completely restart the pairing process. The only way is to reconnect is :
    1. Delete the watch in Motorola Connect
    2. Delete the watch in Android Wear
    3. Hard reset the watch (otherwise it's impossible to start the pairing process)
    4. Turn off and turn on bluetooth on Xperia C4
    5. Disconnect all other Bluetooth devices (like car audio and BSP10 Speaker)
    6. Restart the pairing process
    The whole process is taking about 15 minutes and 30% of the watch battery. (because every apps needs to be reinstalled) What I did so far and did not fix the random disconnection problem :
    -Hard resetted 2 times the phone
    -Hard resetted 4 times the watch (2x on 5.0 and 2x on 5.1 Android Wear)
    -Restarted many times the phone
    -Restarted many times the watch
    -Tried with the "Sony Smart Connect App" disabled on the phone
    -Tried without any extra app on the watch (uninstalled trackID or Sony Music, for example)
    -Updated all the apps on the phone
    -Tried with a "Blank" phone and "Blank" watch (did not install ANY application) What I can say :
    -The problem occurs even in Android 5.0.2 or 5.1.1 on the watch (Motorola has just rolled out the 5.1.1 OTA)
    -The problem occurs with different Moto 360 Watches (tried with the watch of a friend, same problems)
    -The problem occurs only on the Xperia C4 (Dual) phone. (works great on a Zopo ZP999, Wiko Highway and Galaxy S3)
    -Even after resetting, it is sometimes difficult to find the watch in the Bluetooth list, while every other phone can see the watch perfectly!
    -Bluetooth hardware is working perfectly, because I can connect to my car, with my BSP10 speaker and another Bose SLIII Speaker. Additional information for the watch :Motorola 360 Watch Build LDZ220Android Wear 1.1.1.2006643Google Play Services 7.5.76 (2002306-534)Android Platform 5.1.1 Additional information for the phone :Android 5.0Model E5333 (Xperia C4 Dual)Build 27.1.B.1.81Smart Connect 5.7.18.401 (11 june 2015) What I think :
    There is something that is preventing the watch from being connected properly in the Sony extra Apps.
    I think the Smart Connect and Throw (and maybe other) extra apps are bringing a lot of trouble to the Bluetooth connection with the watch. Since 2 days, Motorola has just rolled out the 5.1.1 update of the Moto 360 watch, the update is now enabling WiFi.
    I connected my watch to the wifi and the "Cloud sync" connection is working perfectly in Android Wear.
    When there is no Wifi network, the phone/watch are trying to connect back with Bluetooth... and the problems can begin. Other problem : when the watch is connected to the phone, immediatly after making NFC contact with my Sony BSP10 speaker (to pair them), the connection is lost between the phone and the watch. So if I use my speaker i will have to hard reset my watch. In fact... every morning I take my watch and I need to start that f*c*in pairing process because of the software bug on the phone.Can somebody help here?
    Is there any update planned? Thanks in advance, Guich  
     

    Hello Quester : Like I said, I tried with two different watches ( 2x moto 360) and the problem is still present.
    So you can exclude there is something wrong with the watch.
    I tried with 5.0.2 and 5.1.1 on the watch and it has no effect. My bluetooth hardware is working fine one the phone, too. (other devices are working, like speakers, car, laptop).So clearly, there is a SOFTWARE issue that drops the pairing and makes Android Wear losing the connection and never coming back. Yesterday everything was working fine until I used the BSP10 speaker, connection with the watch was lost.
    I'm absolutely sure the problem is bound to Sony Smart Connect/Throw/whatever because on other phones it works perfectly!       

Maybe you are looking for