Bluetooth problem with msi K8N Neo4-54G

I buy a msi K8N Neo4-54G and it was said on the box : "MSI Dual-Net Card (World First 802.11g+Bluetooth on single PCI Card)"
dont find any driver or something for bluetooth, but Wi-Fi work perfectly.
I hope someone know how to fix that problem.
thanks for your help

Quote from: crazy on 05-January-06, 16:07:28
You may firstly clear cmos and load defaults in the bios, and if it is available, please attach us a picture of the screen which the issue occurred when you hit enter during the its detecting the SATA hard disk. I am a little confused about what you said. Please tell me what changes have you made before the issue took place. I just want to help, so do many other people. But please firstly give us more detailed information.
I did it and nothing! Should I restore the original bios version that came with the mother?
I'll explain the problem: You enter BIOS, go to the disk properties (where says LBA, LARGE, CYLINDERS, HEAD, etc) and hit enter, usually the screen goes blue and shows a line at the bottom of the screen (they are like triangles pointing downside) and 2 seconds after everithing comes back showing the data of the disk ok? Well, now it hangs forever in the "triangles pointing downside" part and I have to restart the machine...
Does this belongs to the issue of the K8n neo4 platinum with the maxtor hdd's ??? The mobo is malfunctioning?
Please helpppp! Thanks!

Similar Messages

Having problems with IEEE 1394 connection with MSI K8N Neo4 Platinum

Hi...
I am encountering problems connecting devices (portable hd etc) via firewire to my PC. My PC does detect the devices.
I am using the MSI K8N Neo4 Platinum board.
Check with Device Manager show that the VIA OHCI Compliant IEEE 1394 Host Controller is working properly.
IEEE 1394 controller has been enabled in Bios.
Need help to rectify this problem.
Thanks for the assistance...
Regards

Try this patch.

DDR 500 memory compatible with MSI K8N Neo4 Platninum?

Hi Folks,
I have a MSI K8N Neo4 Platinum PCB version 1 (S939/Nvidia NForce 4 Ultra), running the latest BIOS version. I wondered if DDR 500/PC4000 memory would work at DDR500 speeds? I note that the MSI webpage for this mobo only mentions DDR400 and in the manual, the BIOS description under "Advanced Chipset Features" - "Memclock Index Value (MHz)" says the maximum speed is 200MHz. However, when I go to this setting in my own BIOS, I can set it to 250MHz. I assume that this should give me DDR500? Would altering this "Memclock Index Value" above 200 MHz cause any other problems with FSB, CPU, HT, PCIe, PCI speeds etc. or is it completely independent? Does anyone have any recommendations of what sticks would work best (I was thinking 2 * 1024 Mb of Corsair XMS or OCZ XTC). Now that DDR2 is standard and DDR prices are creeping up, there doesn't seem to be much difference in price between DDR 400 and DDR 500 memory. Evern if my mobo can't support it, is there any merit in buying DDR 500 memory and running it at DDR 400 or intermediate speeds?
Cheers!

The x2 4800 would run 10x250=2500mhz.
With ddr500 it's beautifull,since you can use the cas latencies which are suited for the memory.
I have to lower my timings a bit to run them at 500mhz.Not much though,but I don't know what the long term prospect is for my memory if I maintain that for long periods of time.
As for running games,I found lower cas timings make my games run smoother opposed to the slightly higher ddr clock with slower timings.
But as mentioned,set cpu vcore 1 step higher in bios,leave the memory at auto,set cpu fsb or HTT at 250mhz,and use the default multiplier of 10 or also leave on auto.'The memory runs in spec and you wont damage it,only the cpu's get another 100mhz and should be a little bit more spicey while temps shouldn't go much higher as it is now.
The sticks should fit physically and I ran mine once at 266mhz stable,and they are just pc3200@200mhz

Stability Problems with a K8N Neo4 System

I just purchased the following system:
MSI K8N Neo4-F
Athlon 64 3200+ Venice
1GB Corsair 2.5 CAS PC3200 (400)
MSI Radeon x800 256MB
WD 7200 RPM 80G HD
Antec True430
NEC 2500 DVDR
I installed XP Pro and had just about all of my drivers installed when I began to see random lock ups where the mouse and everything would freeze without coming out. I would reboot, the same thing would happen. I reinstalled windows again. Same. I swapped the PSU, thinking it could be that, but no avail. I had the memory in the 2 green slots, which seemed wrong, so I switched it to green 1 and purple 1. I switched the voltage on the ram down to 2.5v. Nothing has seemed to help yet... I'm still getting these freezes, any suggestions?
Thanks,
John

I got the same problems. Suddenly there was no response to my keyboard and mouse.
I tested the memory with memtest86, but no problems showed up.
Quote from: johnnyamerika on 25-August-05, 11:45:24
I just purchased the following system:
MSI K8N Neo4-F
Athlon 64 3200+ Venice
1GB Corsair 2.5 CAS PC3200 (400)
MSI Radeon x800 256MB
WD 7200 RPM 80G HD
Antec True430
NEC 2500 DVDR
I installed XP Pro and had just about all of my drivers installed when I began to see random lock ups where the mouse and everything would freeze without coming out. I would reboot, the same thing would happen. I reinstalled windows again. Same. I swapped the PSU, thinking it could be that, but no avail. I had the memory in the 2 green slots, which seemed wrong, so I switched it to green 1 and purple 1. I switched the voltage on the ram down to 2.5v. Nothing has seemed to help yet... I'm still getting these freezes, any suggestions?
Thanks,
John

Problem witn MSI K8N Neo4 platinum

Hello!
Got a strange problem.
gonna give u my specs for the pc first:
AMD64 3000+
2*512mb PC3200 Kingston Hyper X
MSI K8N Neo4 platinum
His x800xl
Seagate 80gb,IDE 3,5 ( currently Linux is installed on it)
Here is the problem.
I've just put all the parts together. Turned on the PC, got into boot screen, pressed delete to enter bios, no problem here, change the first boot to: Cd rom. Beacuse I'm gonna install Xp on it. save and exit the bios, the post(?) screen shows up with sume info, and at the button i can choose: Press F1 to continue or press DEL to enter setup.
I press contunie and a blac screen show up and it said hit ctrl+s to enter raid meny, or something like that, press just enter, the a long list is been gone threw, ends up with : press any key to boot from cd,
i press a Key and the xp cd just start and gets to: controlling the hardware of the computer ( first thing the swedish install cd does). And after seeing that line and three dotes after it for about 5 seconds, it just dissapear and the screen remains black, the cd rom is loading, but no more...
anyone of u know what the problem is?
Best regards
// Swedo

Seems like i am having the same problem on My K8N Neo4 Platinum, actually i built 3 identical rigs. And i am having the same problem as above. What i did to get around the problem was connect My Sata II hard drives to the orange slots on the mobo, and run them as raid0 and everything works, i dont know why i can run it on the purple slots without raid.

Thermalright XP-120 with MSI K8N NEO4 Platinum Mainboard

Greetings,
Can anybody tell me if they have configured the Thermalright XP-120 heatsink with an MSI K8N NEO4 Platinum Mainboard. I intend on fitting the AMD Athlon 64 3500+ CPU. I need to clarify if the heatsink/fan will impact on populating the DIMM slots, or any other aspect of configuration.
Regards,
Niall

Quote
Originally posted by niall_eidw
FastEddie,
Can you tell me what cooling options you are installing in your ASUS A8N mobo builds?
Regards,
Niall
Using a Zalman 7000B-Alu (took the asus back plate off and used the zalman's). Keeps things nice and frosty.
Quote
Originally posted by skippy9146
Unfortunate how a company's right hand (marketing) doesn't know what the left hand (manufacturing) is doing.... or vice versa.
They make early announcements to generate intrest in a product and end up losing customers when they don't deliver.
The hype was these boards would be available at the begining of December, and that, after some minor delays/setbacks. I've been playing with parts ment for the NV4 based systems since the begining of December. MSI used to send me test boards direct from Taiwan to debug and stress--hell, I couldn't even get them to answer emails let alone send a test board.

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

Problems with MSI K8N-Neo3 and Command Queing.

I had some problems with two computers, based on the MSI K8N-Neo3 mainboard - they wouldn't boot into Windows after installing the drivers for the graphiccards. Before the breakdown of the forum, some people suggested that I was using to small PSUs. In the meantime I've solved the problem, by disabling the Command Queing feature in the drivers. Seems there may be a problem with the MSI board, and Maxtor SATA drives with Command Queing.
Key system components for the two computers:
AMD Sempron 3000+
MSI K8N-Neo3
1 GB Kingston PC3200 DDR-SDRAM
MSI GeForce 6600GT or MSI GeForce 6600LE graphics
Maxtor 120 GB SATA disk (6L120M0)
Sony DVD-RW drive
Anyway, I wanna say thanks for the quick answers...

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

Optical Out problems with MSI-K8NS Motherboard Adapter

I have an MSI-K8NS motherboard which came with an extra PCI mount bracket for coax/fiber digital out sound. I just bought a Creative surround sound system set with digital decoder. I hooked the header into where I believe the pins should go into the motherboard and even have a light at the ends of the cable (seemingly has a signal, I presume). I have no idea how to enable this in software, however. The Realtek software that is installed doesn't seem to have any configuration for this digital out, and I can't find a way to use it. I've searched these forums, but still have no idea what's going on. Could someone please help?
Thanks!
Edit: Ok, so it looks like the SoundManager software needs to be in 8 channel mode for spdif to work. I don't understand that, but at least I got it working. Hope this bit of info could help someone else out!

Quote
My best guess is because you are running the default BIOS. Try running with one stick of ram just to start with, so that you have a stable enough system to upgrade your bios to 1.3
I tried running the system with a single stick of ram and still the same thing happens
Quote
did i miss it or have you not mentioned that since your ram is 166MHZ you have changed the memory divider to 166 in BIOS?
When I started the computer up, the motherboard automatically picked the memory modules up as 166Mhz.
To Paul:
I tried to run the memtest86 several times. It starts off for a while, then the computer hangs up as pervious situations. It could just be that the RAM i am using is imcompatible. I may have to invest into Corsair RAM modules.

Problems With MSI K8N Neo Platinum

Posting some probems I have face and wondering if you folks have experience similar problems. I bought 2 and bot hahve same problems (sold both of it). Another friend of mine have also same problems with the board.
1. SATA 1/2 don't work properly. I have detection problems using SATA ports 1/2. The comp will not detect my IDE devices and hang at POST screen. Reboot/reset don't solve the problem. I have to turn off and on to get it to work. Problem is only sovled after switching to SATA 3/4.
2. Network disconnection problem. The NIC will auto disconnect and reconnect back by itself, esp. when under overclocked conditions.
3. Cannot overclock much using DIMM slot-1 esp. when mem is over 230MHz. Must change to slot 2/3. Even so, I do face BSOD stating an USB driver is the cause of the issue.
4. Comp will sometimes unable to reboot at FSB between ~210-240MHz. 250Mz and above seems OK.
Now, I am using Abit KV8 Pro 1.1 and it works fine though. No FSB reboot issues. I am using 1.1 with latest BIOS, thus not AGP/PCI lock issues. Hope MSI will fix those problems mentioned ASAP cause my Abit don't work with mobile A64s. :(

Seriously, I have absolutely no idea. It may be a QC problem, it may be a design problem, its may be BIOS or others. The only thing I know that after I jump ship to Abit KV8 Pro 1.1, all these problems are gone. Only problem is that Abit don't support mobile A64s.
BTe, just another problem or maybe over conservative restrictions. When using DDR333 RAMs, the BIOS will not allow you to manually set it to 400. Thus at 200MHz FSB/HTT, your RAM is stuck at 166MHz. Pretty stupid restriction I have to say.

Problems with msi k8n neo-2 and xfx 6800 card

is this card incompatible with the msi k8n neo-2 motherboard?
i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
What can i do?

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

Get Motherboard monitor 5.x to work with MSI K8N Neo4

Im trying to get the newest motherboard to work with my moterboard. All sensor display either 0°C or -127°C. It´s a MSI K8N Neo 4.. I know there is the corecell prog but it cannot output the temps to samurize

Quote from: Pertan on 04-March-05, 06:20:07
yepp i know that mbm is discontinued but it´s the best program that samurize reads temps and other things from.. I´ll try speedfan and se if samurize supports it
Samutize supports speedfan... I use it myself.
Got the speedfan running with auto-fan speed... So quiet... and fast response to temp. change
Looooovley .....

Slow Boot problem with New K8N Neo4 Platinum HELP

Hello,
I just set up my new rig, the system specs are..
amd64 3500+
K8N Neo4 Platinum PCI-E (non SLI)
2x80gb SATA (insockets 5 and 6) Silicon
2x512 ram generic
BFG 6800 Ultra OC
antec 550 truepower
The entire install went well.. It zipped through windows98... But when it tired to Boot windows98.. it went really really slow.. The animation bar at the bottom was chugging.. like lagging.. and took well over 10 minutes to fully load..
I check RAM was not it.. re-connected.. was not it.. new SATA cables.. no idea any help would do.. getting impatient and tired =O must get it up tonight!

Don't know if you or many people have seen this it's appeared over the last few days K8N Neo4 Platinum - NOTE: NVIDIA nForce 3/4 Series board DO NOT support Windows® 98/ME
There are people running 98 but my own understanding was that 98 could only use a sata drive as a data drive & could not be installed on a sata drive. Where have you installed it ???
see Win 98SE IDE problem.... Has anyone worked it out yet?
luck

Sound issue with MSI K8N neo4 platinum

Hi, I'm having some sound problems with the onboard soundcard
The problem consist in LAGS when I play an mp3, I've tried a lot of drivers including the lastest version for alc850 from realtek but nothing!!!
I hope you can helpme
Thanks in advance

Quote from: dflw on 05-March-05, 06:11:17
http://www.newegg.com/app/ViewProductDesc.asp?description=29-102-178&depa=0
nice fix
yes I know, the ALC850 sux ....that's a good soundcard, probably my next upgrade
I miss the old good soundstorm, not the best to play games with eax but the sound quality was good

Big problem with MSI K8N neo 2!!!

I don't know what it is, but it's a big porblem that many people have with their new K8N Neo 2 Pl motherboard. The problem is that the system freezes and you must push the power button or the reset button.
It happens randomly, when i move my mouse, when i am copying something, when i download something.
I have already updated my bios, with no result. My brother has totally the same specs like me. We bought it at the same time and he has no problems and my pc freezes all the time.
What could it be?
specs:
3800+
POV 6800 Ultra
Twinmos Matched 1Gb PC3200
2 x 160 Gb maxtor Diamandplus 9
Akasa 460 Watt.
Msi what the have you done with my motherboard?

How does that dual power rail thing work? can one device pull from both at the same time? (i.e. the cpu) if not the 14/15 amps from only one of the rails wouldnt be enough, if that is not the problem, it sounds like you got ahold of some dodgy memory. run memtest86+ from a boot floppy, if it clears 10 hours, well start looking for other culprits. it may very well be the motherboard, but the best way to get help is not to go on a forum dedicated to that manufacturer and start cussing at them.

Bluetooth problem with msi K8N Neo4-54G

Similar Messages

Maybe you are looking for